|
Find Similar Products in:
|
|
|
| Smarthome Hidden IR Repeater System |
|
|
| Item# 59501 |
|
|
|
|
|
|
|
Overview
|
- Use an existing IR remote control to operate hidden audio video components
- Allows IR signals to pass through solid doors or walls, line-of-sight to the components is not required
- Four dual emitters allow for remote control of up to eight devices
- Confirmation LED built-in to the IR receiver acknowledges receipt of IR commands
- 40 foot range between an IR remote control and the IR receiver
Essential Info
The Smarthome ™ Hidden IR Repeater System allows you to use an existing infrared (IR) remote control to operate up to eight audio/video (A/V) components located behind closed doors or walls in an entertainment cabinet or equipment closet. The built-in IR distribution technology gives you the ability to conceal, yet still control, bulky electronic equipment such as a cable or satellite TV receiver, stereo receiver or amplifier, CD player, DVD player, Blu-ray player, or virtually any component controlled by an IR signal. The system uses an IR receiver to take in the IR signals from an existing remote control and distribute those signals via IR emitters to A/V components. No more leaving cabinet doors open or struggling to remotely access your hidden equipment, you'll be able to control up to eight A/V components from up to 40 feet away with extreme reliability. 
Manuals/Software
What's Included
Hidden IR Repeater Box
Four (4) Dual Output Emitters with six foot cord and 1/8" mini-plug connector
IR Receiver with six foot cord and 4-pin DIN connector
Plug-in Power Supply with five foot cord and barrel connector
Two strips of Velcro with adhesive backing for mounting
Quick-Start Guide
|
More Info
|
This new Hidden IR Repeater System features the following improvements over the previous model:- The IR receiver has an operating distance of 40 feet (formerly 30 feet)
- There are only four dual emitters (instead of eight single emitters), making it easier to manage cables
- The IR receiver has a compact, flat form factor (formerly large and round) for easier mounting
- The IR emitters connect to the main hub via a 1/8" mini jack plug
- The IR receiver connects to the main hub via a 4-pin DIN connector
- A feedback LED indicator light has been built-in to the IR receiver (instead of being a separate component to plug in), making it easier to manage cables
Easy Setup
This home theater accessory is easy to use and sets up in minutes, your friends will think you had a pro install it! Start by mounting the Hidden IR repeater box in your equipment cabinet using the included Velcro tape. Plug the 1/8" mini jack plug end of the emitters into the repeater box and attach the other end (the emitters) to the IR window of each A/V component you wish to control. Next, plug the 4-pin DIN connector from the IR receiver into the repeater box and then place the other end (the IR receiver) in a location where it can receive direct line-of-sight signals from your IR remote control(s). Ideally this will be on a shelf or on an exposed part of the cabinet, the black color helps it hide beneath equipment or back in the shadows. Double sided tape has been pre-installed on the IR emitters and the IR receiver to make this process easier. That's it, now you can use your A/V remote control as usual, changing channels, scrolling through your CD, DVD or Blu-ray disk, all while the they are hidden from view. As an added feature, a confirmation LED indicator light has been built into the IR receiver to let you know when the system has received a remote control command.
The included emitters can control many different A/V components. They're made of material that is transparent to IR light, so commands can still pass directly to individual components if desired. Each emitter cord is approximately six feet in length, with two emitters split off the of end; the emitter wires can be peeled away from each other to allow for a variety of mounting positions. If your equipment is located in a closet or rack more than six feet away from your monitor, add a 50 Foot IR Emitter Extension Cable to each emitter cable for added distance; two can be used for a distance up to 100 feet.
Please Note: Placing two IR emitters on the same component will not improve performance.
Although not designed to reject interference from plasma or LCD TVs, you can work around this by installing the IR receiver eye in an area that isn't exposed to the TV screen - at the back of a bookshelf, on the wall below or next to the TV - somewhere the eye can't "see" the TV image. Just make sure you still have a direct line of sight from the eye to your normal seating position.
System Notes
- Some A/V components, such as high-powered amplifiers and receiver, may require additional ventilation and will overheat in an enclosed cabinet and might require a cooling fan.
- Protect the IR receiver from plasma screens and devices that emit too much low-frequency RF or an excess of ambient light, including direct sunlight, floodlights, and some halogen or fluorescent lamps
- Avoid allowing IR emitter cables to block equipment doors and slots that may need to be opened from time to time
- You'll enjoy increased range in dimmer applications, as this IR system has more sensitivity with less ambient light
- If you prefer, attach an IR emitter to a shelf so that it is facing the component's IR eye and is within 3 inches of the eye. This will allow IR control without attaching the IR emitter directly to the component
- Do not attempt to open the power supply or IR repeater box. Doing so will void your warranty
- The Hidden IR is not weather-resistant. Do not expose this system to moisture
- A 120 volt AC to 12 volt DC adapter is included. For use in 220/240 volt countries, use a locally obtained 220/240 VAC to 12 volt DC, 100 mA adapter
|
Specifications
|
Specifications | | Manufacturer: | Smarthome | | Manufacturer Product No.: | 59501 - Smarthome Hidden IR Repeater System | | UPC: | 718122393411 | | Dimensions (Approximate): | IR repeater box: 2 5/8" L x 2 1/8" W x 7/8" T
IR emitter cord: six feet in length
IR receiver cord: six feet in length
Power cord: five feet in length | | Emitters: | Four cables with 1/8" mini jack plugs
Each cable has two emitters for a total of eight emitters | | IR Receiver Range: | 40 feet (may vary depending on actual operating conditions) | | Power Supply: | 120V-240V, 50-60Hz, 0.15A max LPS, 12V 0.2A output | | Warranty: | One (1) year |
|
Images/Video
|
|
|
Reviews
|
|
|
Accessories
|
|
|
Related Items
|
Customers Also Bought
|
|
|
|
|