• For use with standard incandescent lighting, fluorescent lighting, and small appliances
• Wirelessly control on/off functions of table and floor lamps and small appliances
• Receptacle contains one Z-Wave AC outlet and one standard AC outlet
• Requires in-wall installation with hard-wired connections
• Easily connects using existing wires

The GE Duplex Receptacle enables wireless control of on/off functions for standard incandescent table and floor lamps, fluorescent table and floor lamps, and small appliances. The receptacle replaces your current electrical outlet, uses your existing wiring, and provides a Z-Wave enabled outlet for the lamp/appliance that you would like to control and a regular pass-through AC outlet for other electrical devices. The receptacle requires in-wall installation with hard-wired connections.

This device complies with the Z-Wave standard of open-air, line of sight transmission distances of 65 feet. Actual performance in a home depends on the number of walls between the remote controller and the destination device, the type of construction and the number of Z-Wave enabled devices installed in the control network.

Important Note:The device plugged into the Z-Wave controlled outlet on this module must not exceed 600 watts (Incandescent); 15 Amps, 1800W (Resistive); or ½ HP (Motor). The maximum rating for both outlets combined is 1800W (15A) Resistive.

• Owner's Manual

1x - Z-Wave Wireless Lighting Control Duplex Receptacle

1x - Owners Manual

Z-Wave Products	Leviton ControlThink ThinkEssentials 2.1 Professional Software	Cooper Wiring Devices ASPIRE RF 15A Split Control Duplex Receptacle - Desert Sand

GE 45609 Z-Wave Wireless Lighting Control On/Off Wall Switch	Mi Casa Verde VeraLite - US INSTEON-Compatible Z-Wave Controller	GE 45614 Z-Wave 3-Way On/Off Kit	GE 45602 Z-Wave Wireless Lighting Control Lamp Module