|
|
| Elevate Power Unit |
| Item# 57305 |
|
|
|
|
|
|
Overview
|
- Create four independent listening zones in your house
- Connect to two audio sources for a variety of listening options in each zone
- System delivers 30 watts to each zone
Essential Info
You don't need to buy multiple stereo systems in order to listen to audio in different rooms of your home. Create an expandable whole-house audio system with the Elevate Power Unit. This expandable kit lets you listen to audio from two different input sources in up to four zones of your home, controlling power, source selection, and volume through cat. 5-connected keypads. Listen to soft jazz with your guests in the living room and dining area while your kids rock out upstairs, without the wasted expense of multiple stereos. This kit includes the main power unit and an IR remote control; an install kit that includes the connection plate and two zone keypads is required and sold separately, and you can expand the system to additional rooms by adding up to two more keypads (sold separately).
Manuals/Software
What's Included
Power unit
All-port cable
2 10-foot IR emitters
Power adapter
Power cord
Remote control
2 AAA batteries
Manual
Warranty card
|
More Info
|
Control Audio Components With Keypads or RemoteYou'll be able to control the two connected audio components with your existing A/V remote. The Breathe Audio keypads have built-in IR receivers, so in addition to using the keys, you can simply aim your remote from across the room. IR signals are delivered to your A/V components through the two included IR emitters. The included IR remote can be used to teach keypad functions to any learning remote.
Wiring and ConnectionsTwo- or four-conductor audio cable sends the audio signal to each pair of speakers in the four listening zones. Speaker wire, cat. 5 wiring, and audio components all connect to the Breathe Audio Allport™ connection plate (part of the required install kit).
Adding SpeakersWhen setting up your Breathe Audio whole-house audio system, you'll want to be sure you're connected to the proper speakers for each zone. By installing a pair of in-wall or in-ceiling speakers, you'll be assured of quality sound that won't interfere with your décor. Installing in a small room? Connect a Dual Voice Coil Speaker in your ceiling. This convenient, unobtrusive device has a pair of tweeters built right in, so it creates the illusion of full stereo sound without requiring any extra space. Outdoor speakers are also available. These weatherproof rock speakers, available in granite and sandstone, are ideal if you'll be using a patio as one of your zones.
Power InformationThe Elevate Power Unit delivers 30 watts of power to each zone for high-fidelity audio amplification. For large rooms or patio use, add a 200-watt amplifier (sold separately).
Creating a Customized Whole-House Audio SystemIf you plan to install four zones at once, you can save by purchasing your Elevate Power Unit, installation kit, and keypads together as the Elevate 2-Source 4-Zone Distributed Audio System.
This product cannot be sold to Canadian addresses.
|
Specifications
|
Specifications | | Breathe Audio Product No.: | BA-2430DA | | UPC: | 701963854005 | | Dimensions: | 3.5" x 8.5" x 12.75" (89mm x 216mm x 325mm) | | Weight: | 7.8 lbs. (3.5kg) | | Sources: | 2 | | Distributed Zones: | 4 max. | | Communication Conduit: | Cat. 5 wiring | | Power Consumption: | Full power: 190VA (166W); average: 88VA (70W) 1/8 power; no signal: 14VA (10W) | | Power Supply: | 120VAC/240VAC 50/60Hz | | Approvals: | UL listed | | Warranty: | 2 years, limited |
Power Amplifier Section Specifications | | Continuous Average Output Power: | 15W | | Two channels driven, 30-20kHz: | @ 1% THD | | Rated Distortion (1/2 power): | 0.40% | | Rated Impedance: | 8 Ohms | | Damping Factor: | 50+ | | Frequency Response: | 30-20kHz +/-3dB |
Preamplifier Section Specifications | | Input Impedance: | 50k | | Input Sensitivity for rated power: | 330mV RMS | | Input Overload: | 3V RMS |
IR System Specifications | | Source Outputs: | 2 | | Output Drive Current: | 100mA | | Output Drive Voltage: | 12V |
|
Images/Video
|
|
|
Reviews
|
|
|
Accessories
|
|
|
Related Items
|
|
|
|
|