Overview
|
- Create four independent listening zones in your house
- Each zone can connect to two audio sources for a variety of listening options
- Control stereo components with wall-mounted keypads or IR remote controls
Essential Info
Listen to audio from two different input sources from any four zones of your home. The Elevate 2-Source 4-Zone Distributed Audio System is an easy-to-use whole-house audio system that lets you listen to soft jazz with your guests in the living room and dining area while your kids rock out upstairs, and you won't have the wasted expense of multiple stereos. Control two independent sources using wall-mounted keypads or your existing remote controls. This kit includes everything you'll need to get started, including the main power source and four keypads.
Manuals/Software
What's Included
Power unit
4 keypads
All-port connection hub
2 10-foot IR emitters
Power adapter
Power cord
Remote control
2 AAA batteries
Manual
Warranty card
|
More Info
|
Control Audio Components With Keypads or RemoteControl the two connected audio components with your existing A/V remote. Each keypad has a built-in IR receiver, so in addition to using the keys, you can simply aim your remote from across the room. IR signals are delivered to your A/V components through the two included IR emitters. Each keypad features volume control, source selection buttons, and a power button, which can also be used to power down all zones at once. The included IR remote can be used to teach keypad functions to any learning remote.
Wiring and ConnectionsTwo- or four-conductor audio cable sends the audio signal to each pair of speakers in the four listening zones. Speaker wire, cat. 5 wiring, and audio components all connect to the Breathe Audio Allport™ connection plate.
Adding SpeakersWhen setting up your Breathe Audio whole-house audio system, you'll want to be sure you're connected to the proper speakers for each zone. By installing a pair of in-wall or in-ceiling speakers, you'll be assured of quality sound that won't interfere with your décor. Installing in a small room? Connect a Dual Voice Coil Speaker in your ceiling. This convenient, unobtrusive device has a pair of tweeters built right in, so it creates the illusion of full stereo sound without requiring any extra space. Outdoor speakers are also available. These weatherproof rock speakers, available in granite and sandstone, are ideal if you'll be using a patio as one of your zones.
Power InformationEach zone receives 30 watts of power for high-fidelity audio amplification. For large rooms or patio use, add a 200-watt amplifier (sold separately).
Creating a Customized Whole-House Audio SystemThe Breathe Audio power unit and install kit can also be purchased separately for homes only requiring two zones. You can also add keypads to expand to additional zones as necessary.
This product cannot be sold to Canadian addresses.
|
Specifications
|
Specifications | | Manufacturer: | Breathe Audio | | Manufacturer Product No.: | BA-2430S | | UPC: | 701963854067 | | Dimensions: | 3.5" x 8.5" x 12.75" (89mm x 216mm x 325mm) | | Weight: | 7.8 lbs. (3.5kg) | | Sources: | 2 | | Distributed Zones: | 4 | | Communication Conduit: | Cat. 5 wiring | | Power Consumption: | Full power: 190VA (166W); average: 88VA (70W) 1/8 power; no signal: 14VA (10W) | | Power Supply: | 120VAC/240VAC 50/60Hz | | Approvals: | UL listed | | Warranty: | 2 years, limited |
Power Amplifier Section Specifications | | Continuous Average Output Power: | 15W | | Two channels driven, 30-20kHz: | @ 1% THD | | Rated Distortion (1/2 power): | 0.40% | | Rated Impedance: | 8 Ohms | | Damping Factor: | 50+ | | Frequency Response: | 30-20kHz +/-3dB |
Preamplifier Section Specifications | | Input Impedance: | 50k | | Input Sensitivity for rated power: | 330mV RMS | | Input Overload: | 3V RMS |
IR System Specifications | | Source Outputs: | 2 | | Output Drive Current: | 100mA | | Output Drive Voltage: | 12V |
|
Images/Video
|
|
|
Reviews
|
|
|
Accessories
|
|
|
Related Items
|
|
|
|
View Cart 
