|
|
| Intermatic IG1240RC3 Whole House Surge Protector |
|
Item# 48716
|
|
Price: Normally $193.50
Hot Deal $115.90
|
|
|
|
|
|
Free shipping on orders $200 and up details
|
|
Overview
|
- NEMA 3R Outdoor Raintight Enclosure for indoor or outdoor applications
- Compatable with power line carrier type home automation and X10 systems
- 60k Amps Total Peak Surge Capacity
- CSA Listed to ANSI/UL 1449 3rd Edition
- Type 1 or 2 applications
- 5 year warranty
- Connected Equipment coverage $10,000 for 5 years
Essential Info
The Intermatic IG1240RC3 Whole House Surge Protector features six modes of protection and is recommended for residential and light commercial applications. It is intended for installation on 120/240 volt AC panels. The IG1240RC incorporates the newest developments in MOV technology and provides individual component thermal protection and monitoring. The failure of a single component will turn the LED indicator OFF and turn the alarm indicator ON. The "All Mode" protection configuration provides distinct protection paths between every conductor in the electrical system. When installed on service entrance or main panels with a common neutral-ground bus, line-to-neutral and line-toground protective circuits are paralleled for redundancy and maximum current capability. On sub-panels with separate neutral and ground busses, protection is provided against all possible modes of surge energy with distinct line-to-neutral, line-to-ground, neutral-to-ground and line-to-line protection components.
Important notes:
- Smarthome does not offer technical support on this product, please contact the manufacturer directly for all product support.
- Defective exchanges for identical item within 30 days of purchase. After 30 days, please contact the manufacturer.
Manuals/Software
|
Specifications
|
CONFIGURATION: Parallel technology permits installation over a wide range of applications and ampacities. Compact design provides a small footprint for easy installation
PROTECTION MODES: All Mode protection; line to line, line to neutral, line to ground and neutral to ground
COMPONENTS: Board configuration provides Very Low Impedance (VLI) surge paths
THERMAL PROTECTION: MOV’s contain thermal detection (TDC) and protection. Components react to excessive heat stress at each component location and will trigger the TDC to decouple the affected suppression component
OPERATIONAL INDICATORS: Dedicated circuits monitor each component in each mode and control the operation of each phase LED indicator. Lighted green indicator(s) represent normal power-on and unit operational condition. A red indicator will light if protection is reduced or lost
ENCLOSURE: NEMA 4 type polycarbonate (Noryl)
MOUNTING: Two tabs molded into unit housing are located on two faces. Unit may also be mounted by use of the ½" offset nipple
WIRING: 30" of 14 gauge stranded copper wire is preconnected for each phase, neutral and ground. Wires exit the enclosure through a ½" nipple located at the left side of the enclosure
WIRE COLOR CODE: Black - phase leads, White - neutral lead, Green - ground lead
WEIGHT: 2.85 pounds, 3.27 pounds in carton, 13.65 pounds in master carton of four units
AMBIENT OPERATING TEMPERATURE: - 40 to + 85 OC (- 40 to + 185 OF)
AGENCY LISTINGS: UL 1449 - 2nd Edition; cULus
|
Reviews
|
|
|
Related Items
|
Customers Also Bought
|
|
|
|