|
|
| X10 RF - UPB Transceiver |
|
1 customer rating:
|  |
|
| Item# 4830U |
|
|
|
|
|
|
Overview
|
- Receives all 256 house / unit code addresses from X10 remotes & occupancy sensors and translates into UPB signals
- Supports UPB link mode, up to 64 link addresses
- Supports direct mode, up to 256 DIDs with bright, dim, on & off commands
- 150-foot range
Essential Info
The transceiver receives all 256 X10 house code/unit code addresses plus commands (On, Off) then maps these signals either to UPB direct addresses or UPB link addresses according to your needs. This information is then presented over your household wiring to any UPB device capable of receiving it. This transceiver requires HAI UPB Powerline Interface Module or the Simply Automated Computer UPB Interface Module (sold separately).
Manuals/Software
What's Included
Transceiver
Antenna
Mounting bracket
Coax cable
RS232 cable
Power supply 9VDC 100mA
Instructions
|
More Info
|
Setting up the X10 RF - UPB Transceiver is easy. You will need a PC with Windows 98 or later as your OS and a serial port, the downloaded configuration software, and the supplied RS232 cable.
Connect the X10 RF - UPB Transceiver to your PC to assign the UPB address mapping and program X10 code filtering. Once these have been set, the X10 RF - UPB Transceiver can be disconnected from the PC and it will respond to UPB signals just like any other UPB-connected device. The X10 RF - UPB Transceiver does not have to be connected to a PC for everyday operation.
Packaged with an external whip antenna, the X10 RF - UPB Transceiver will pick up signals from any X10 RF transmitter within its 150-foot range and is equipped with the ability to filter specific house and unit codes, since its vast range may pick up a neighbor's X10 remote. It's even safe for outdoor use if mounted in a weatherproof enclosure.
Requires a Powerline Interface ModuleThe X10 RF - UPB Transceiver needs an interface to send its signals into your power lines. Use the HAI UPB Powerline Interface Module or the Simply Automated Computer UPB Interface Module (sold separately).
|
Specifications
|
Transceiver Specifications | | Manufacturer: | WGL Designs | | Manufacturer Product No.: | upb572 30082 | | Dimensions: | 3.8" x 2.4" x 1.0" | | Weight: | 4 oz. | | Range: | 150 feet | | Input Power: | 120VAC, 60Hz, 4W | | Output Power: | 9VDC, 100mA | | Receiver Frequency: | 310MHz | | Operating Temperature: | 20° F to 125° F |
|
Images/Video
|
|
|
Reviews
|
|
|
Accessories
|
|
|
|
|