|
|
| Homepro Amplified Coupler Repeater |
|
|
| Item# 4820AC |
|
|
|
|
|
|
Overview
|
- Improved receive signal response, higher signal output
- Ideal for systems with less demanding needs
- Mounts easily on a double-gang electrical box
Essential Info
For large, complex X10 installations where it may be necessary to use more than one amplifier, this Amplified Coupler-Repeater can be set to ignore previously amplified and repeated signals and only repeat/amplify original X10 signals. This prevents signal collisions that can reduce signal strength when multiple amplifiers are used. This Amplified Coupler-Repeater has DIP switches that enable the user to customize their operation depending on the application. The beige-painted enclosure is designed to mount on a 4 11/16" x 4 11/16" (double-gang) electrical box. LEDs in the cover indicate programming and operational modes. Incoming signals as weak as 25mV can be detected and repeated on all phases of power.
Manuals/Software
What's Included
HomePro Amplified Coupler-Repeater
Mechanical Connection Tri Barrier Terminal Block with Screw Clamp
|
More Info
|
For systems with less demanding needs, this module amplifies X10 signals of 100mV or more to 5V across both phases of a 120/240 VAC split-single phase distribution system commonly found in a single-family home. The Amplified Coupler-Repeater will repeat both standard and extended X10 code sets. LEDs on unit show operation status. One shows that power is on and the unit is ready to repeat signals, the other will blink when it receives and sends X10 signals. Both lines are fuse protected. Will mount into a standard three-gang electrical box.
|
Specifications
|
Specifications | | Manufacturer: | HomePro | | Manufacturer Product No.: | CR230 | | Supply Voltage: | 120 VAC +/- 10% (Phase A to neutral) | | Fuses (field replaceable): | Phase A: 5x20mm, 1.0A, 250V
Phase B: 5x20mm, 500mA, 250V | | Signal Input: | X-10 Powerline Carrier on any phase sensitive to 25 mV; Signal Carrying Conductor (SCC) | | Mechanical Connection Tri Barrier Terminal Block with Screw Clamp | | Wire Size Minimum: | 16 AWG | | Wire Strip Length: | 5/16" | | Operating Temperature: | 32º to 120ºF | | Operating Humidity: | 10% to 95% non-condensing |
|
Images/Video
|
|
|
Reviews
|
|
|
Related Items
|
Customers Also Bought
|
|
|