Add $175.00 for FREE shipping
Shop All!
Connector Type
3.5mm Connectors
IR Repeater Components
Complete IR Kits
IR Emitters
IR Sensors
Cat. 5
Cat. 6
Infrared (IR)
Infrared (Standard Consumer Electronics)
High Definition (HD)
LED Feedback
Wall Mounted
# of Gangs
1 Gang
# of Ports
1 Port
Trim Plate Design
Decora / Paddle
Maximum Resolution
Ease of Installation
Beginner (Installs < 10 minutes)
Other Ways to Shop
On Sale
Order the Smarthome Catalog

Send HD Audio Video and IR Signals Up to 30 Meters Using Inexpensive Ethernet Cables
MP 8008 1-Port HDMI with IR Over Cat5 / Cat6 Wall Plate Extender Balun Kit , White
MP 8008 1-Port HDMI with IR Over Cat5 / Cat6 Wall Plate Extender Balun Kit , White
Click for larger image and other views
Rear Connections
MP 8008 1-Port HDMI with IR Over Cat5 / Cat6 Wall Plate Extender Balun Kit , White
Item# 47004
Price: Normally $60.06 
Hot Deal $36.04
Open Box (Qty:1) $30.27 ea - Add to cart
Free shipping on orders over $175 - See Details


  • Compatible with High-Speed HDMI signals up to 1080p
  • Supports 24 and 36 bit Deep Color
  • Data transfer speed of 6.75Gbps - 10.2Gbps
  • Outputs high end audio formats including LPCM, Dolby-AC3, DTS 7.1, DSD
  • Includes Infrared (IR) pass through control (IR receiver and emitter included)

Essential Info

If you are considering putting your cable/satellite receiver, DVD/Blu-ray player or gaming system in another room away from your HDTV, the 1-Port HDMI Over Cat5 / Cat6 Wall Plate Extender Balun Kit is the perfect solution. The wall plate extenders mount to your wall; simply attach your source AV component to the sender extender and the destination HDTV, projector or monitor to the receiver extender. Additionally these extenders feature an IR Receiver at the Receiver Extender and an IR Emitter at the Sender Extender, so you can also control your source AV component with your existing remote control. Between the extenders, you can run up to 30 meters of Cat5e /Cat 6 cable through your walls, ceiling, attic, etc. to couple the two HDMI connections. Whether temporarily moving your television into another room or due to limitations with your home's setup, this device helps overcome the signal loss inherent to lengthy HDMI cable setups.

Manufacturer Recommendations:
(1) - Use a minimum of 24 AWG HDMI cables between the source and destination when connecting this extender, to ensure minimal signal loss and maximum High Speed signal reliability.
(2) - Although this extender will work with Cat5e UTP cables, it is strongly recommended to use Cat6 STP cabling for anything longer than minimal distances. Cat6 STP cabling will provide the highest reliability and signal integrity to ensure that your installation is trouble-free under all conditions for years to come.

What's Included

  • 1x - Sender Extender
  • 1x - Receiver Extender
  • 1x - IR Receiver
  • 1x - IR Transmitter (Emitter)
  • 1x - Owner's Manual
  • Specifications

    Manufacturer Product No.8009
    Data Transfer Speed6.75Gbps - 10.2Gbps
    Supported Resolutions1080p/1080i/720p/576p/576i/480p/480i
    Color Support24 and 36 bit Deep Color
    Maximum Output Cable DistanceLess than 5 meters
    Maximum Input Cable DistanceLess than 5 meters
    Maximum Distance Between ExtendersUp to 30 Meters5
    Operating Humidity Range5 to 90% RH (no condensation)
    Operating Temperature Range-15° to 55° C (5° to 131° F)
    Dimensions114mm x 70mm x 41mm (4.5" x 2.7" x 1.6")
    IR SignalSupports single-band IR signals between 39-45 kHz
    IR Cables4'10" long
    Data Transfer Speed6.75Gbps - 10.2Gbps
    Regulatory CertificationFCC, CE


    Rear Connections       
    Rear Connections       


    5 Ratings
    5 star: 40%  (2)
    4 star: 0%  (0)
    3 star: 40%  (2)
    2 star: 20%  (1)
    1 star: 0%  (0)
    Average Customer Rating
    (5 customer ratings)
    Share your thoughts with other customers
    KEN -- folsom, LA   9/26/2013
    Second one we purchased was dead out of the box. Had to order another one. They do perform as expected. The IR receiver needs to be more flexible. It's not very pretty and you cannot use any other IR emitters with this system.
    Matt -- Maryland   9/15/2013
    Just installed with 50' of Cat6 cables between the wallplates yes - requires two Cat6 cables. Works great, including the IR system.
    JAMES -- pittsburgh, PA   12/14/2012
    I have had no trouble using these wall plates. I have run 1080p as far as 50ft over Cat5e and the IR extender has worked perfectly as well. I would recommend this product to others.
    JASON -- cottondale, AL   7/9/2012
    Product passes video and audio signals without any issues. The IR will only work if there is an active video signal since it is not a powered unit. So if you turn off your video source you will not be able turn it back on via the IR.
    JERRY -- reno, NV   4/27/2012
    HDMI Works great.... IR system doesn't work very well at all. I have tried numerous different configurations and setups and I still had no luck with getting the IR system to work.

    Related Items

    Customers Also Bought

    Sign-up for Exclusive Email offers 
    How to Order Track Your Package Shipping Returns Contact Us Customer Service Retail Store
    Getting Started Learning Center FAQ Dealers Customer Testimonials Affiliate Program
    About Us INSTEON Press Awards Employment Guarantees Security & Privacy
    Free Catalog Email Newsletter Forum RSS Site Map
    Have questions? Call us at 800-762-7846 (Mon-Fri 5am-7pm and Sat 6am-3pm PT) or send us a message
    Place your order by 3pm PT for same day shipping
    Copyright 1995-2014 SMARTHOME™
    Verisign Secure Site PayPal Acceptance Mark