Overview
|
- Attractive dimmer control combines fashion with function
- Separate dim/bright bar has an LED indicator for lighting level
- Part of the Acenti line of matching dimmers, switches, wallplates and more
Essential Info
The purpose of installing dimmable lights is to promote the aesthetics of your room, showing your décor in its best light for daily use or special occasions. Why not invest in controls that are as pleasing to the eye as possible? The 600-watt Acenti™ Dimmer for magnetic low-voltage lights is part of Leviton's new Acenti line of dimmers, switches, receptacles and accessories that are both attractive and durable, all featuring a five-year warranty. This dimmer will control a single light and works by itself or in a three-way or more application. Because of their innovative contoured geometry and uniform construction and matte finish, Acenti dimmers and switches require Acenti wallplates for installation.
Manuals/Software
What's Included
Acenti Dimmer
Mounting screws
Instructions
|
More Info
|
A separate dim/bright bar is set into the dimmer for precise light-level setting, and the LED indicator light behind this bar shows the relative lighting level for an accurate measure of the light's intensity. The Acenti Dimmer remembers your desired setting, returning to the same light level when turned back on, even after a power failure, thanks to its internal memory.
With Acenti controls, you're never truly in the dark: A soothing blue LED locator light illuminates automatically when the lights are off for easy location of the controls. You'll also welcome the easy programming for minimum brightness level, preset on level, and on/off fade rate; programming requires neither tools nor removal of the wallplate.
If you have two or more switches together on your wall, you'll appreciate the flawless multigang wallplates. With no dividers or frames between devices, you're left only with the smooth, clean lines of your Acenti controls. Acenti's finely engineered Tox® joining method offers both surface alignment and behind-the-plate integrity, for a true and flawless installation every time.
This Acenti 600-Watt Dimmer contains circuitry specifically designed to control and provide a symmetrical AC waveform to the input of magnetic low-voltage transformers, preventing the transformer from operating above its rated operating current or temperature.
This Acenti dimmer will control a 600-watt magnetic light. Dimmers are also available for 600-watt incandescent or 1000-watt magnetic or incandescent lights, and Acenti dimmers are even available for fluorescent lights, as well. For whole-house continuity, replace your outdated outlets with Acenti duplex, triplex or surge-suppressing receptacles. See Smarthome's entire line of Acenti products here.
The Acenti Dimmer 600-watt Magnetic is available in Natural, Driftwood, Onyx, Slate, Quartz, Sand, and Alabaster (shown). All colors other than Alabaster must be special ordered by calling 1-866-243-8020.
|
Specifications
|
Specifications | | Manufacturer: | Leviton | | Manufacturer Product No.: | ACM06-1L-W | | UPC: | 078477187821 | | Dimensions: | 4.79" H x 1.75" W x 1.4" D | | Switch Type: | Single-pole, 3-way or more applications | | Style: | Acenti | | Type: | Digital | | Load Type: | Incandescent/Mag Low-Voltage | | Load Rating: | 600W/VA | | Voltage: | 120 Volt AC 60Hz | | Light: | LED locator and brightness display | | LED Color: | Blue | | Action: | Selectable soft-ON/fade-OFF | | Dielectric Voltage: | Withstands 1500V for 1 minute | | Overload UL20 Test: | 100 cycles of OL at 4.8 times rated current | | Temperature Rise: | 140° F (60° C) surface, 167° F (75° C) wiring | | Endurance: | 10,000 cycles minimum | | Terminal ID: | Grn-Gnd Blk-Hot Red-Load Brass-Travlr Slvr-Neutral | | Terminal Accommodation: | 14-12 AWG | | Torque Range: | 25 inch-pounds maximum | | Face Material: | Engineering-grade polymer | | Body Material: | Polycarbonate | | Contacts: | N/A ON/OFF Air-Gap Switch | | Terminal Screws: | Steel 10-32 | | Ground Screw: | Steel 10-32 | | Power Leads: | 16 AWG | | Messenger or Travel Leads: | 18 AWG | | Humidity: | 20-90 percent, non-condensing | | Operating Temperature: | 32° F to 131° F (0° C to 55° C) | | Protection: | RFI IEC Level 4 Surge & Fast Transient | | Approvals: | NEMA, ANSI, UL, CSA and FCC compliant | | Warranty: | 5 years, limited |
|
Images/Video
|
|
|
Reviews
|
|
|
Accessories
|
|
|
Related Items
|
Customers Also Bought
|
|
View Cart 
