|
Find Similar Products in:
|
|
|
| Vizia 1.5A Fan Control |
|
|
| Item# 45059 |
|
|
|
|
|
|
Overview
|
- Attractive fan speed control combines fashion with all-digital performance
- Works in 3-way (or more) applications
- Matches your Vizia and Vizia RF controllers
Essential Info
Leviton's line of Vizia control devices combines elegant design with all-digital circuitry to give you precise lighting control. This 1.5-Amp Digital Fan Speed Control has an LED indicator to help find it in the dark and a line of seven LEDs to indicate the preset brightness level. The brightness level is set by a handy control bar just to the right of the paddle. This dimmer can stand alone as a single-pole dimmer, or can be part of a 3-way (or more) circuit.
Operating the Vizia 1.5-Amp Digital Fan Speed Control couldn't be easier. One touch turns your fan on to the last-used speed or a pre-set level, or you can adjust to a new speed by using the Fan Speed Bar (even when the fan is off). Any installed remote switches will track and display level settings. Touch the control paddle once more to turn the fan off. There are 3 speed settings: Low, Medium, and High.
Manuals/Software
What's Included
Vizia 1.5-Amp Fan Digital Control
White paddle installed; Almond & Ivory color change kits
Instructions
|
More Info
|
The Vizia Range of ProductsLeviton's Vizia product line is designed to add a sleek, modern look and feel to your home or office. All the switch paddles are hinged at the top, rather than the more common center position, for a smooth appearance - the paddle flows perfectly into the wall plate without protruding. The switch paddles always return to a neutral position, so all your switches are always lined up for the best appearance. Vizia switches and dimmers blend perfectly with Vizia RF devices to increase your control options, including hand-held remote controls. The Vizia 1.5-Amp Digital Fan Speed Control comes with a White paddle installed; Ivory and Almond are included and are simple to change to blend with your décor. All Vizia devices use Decora-style wall plates (sold separately).
Important Installation PointsThis Vizia 1.5-Amp Digital Fan Speed Control must be used with motor loads only; use the 600 watt Incandescent Dimmer for regular lighting fixtures, the Vizia 600VA Magnetic Dimmer for fixtures with electronic ballasts, or the Vizia 1000VA Fluorescent Dimmer for dimmable fluorescent lighting. Use this device only with copper or copper clad wire. You may mix Vizia and Vizia RF devices in multi-way circuits, but only the Vizia RF devices will send the Z-Wave commands, and there is a maximum of 5 LED devices or 10 non-LED devices in one circuit.
A Note About NeutralsThis Vizia device does require a neutral wire for all installations. Learn more about neutrals here: Do I have neutrals?
Full Line of Vizia and Vizia RF Lighting Controls AvailableFrom dimmers to plug-in modules to remote controls, a variety of Vizia Z-Wave lighting devices is available that will let you control every light in your home. The following options are available:
Vizia
600 watt Incandescent Dimmer
600 Volt-Amp Magnetic Dimmer
1000 watt Incandescent Dimmer
400 watt Electronic Dimmer
600 watt Electronic Dimmer
1000 Volt-Amp Fluorescent Dimmer
277 Volt 1200 Volt-Amp Fluorescent Dimmer
8 Amp Fluorescent Dimmer
277 Volt 6-Amp Fluorescent Dimmer
15-Amp Electronic Switch
Dimmer/Fan Coordinating Remote, no LEDs
Dimmer/Fan Matching Remote with LEDs
277 Volt Dimmer Matching Remote
Coordinating Remote Switch, no LEDs
Matching Remote Switch with Locator LED
Vizia RF (Z-Wave)
15-Amp Switch
1000-Watt Dimmer Switch
Magnetic Low-Voltage Dimmer Switch
300-Watt Lamp Module
15-Amp Appliance Module
1-Scene Controller Switch
1-Zone Controller Switch
4-Scene Remote Switch
4-Zone Controller Switch
All devices are sold separately. Vizia RF products are also compatible with all other Z-Wave-enabled devices.
|
Specifications
|
Specifications | | Manufacturer: | Leviton | | Manufacturer Product No.: | VZF01-1LX/VPF01-1L | | UPC: | 078477290323 | | Dimensions: | 4 1/4" x 1 3/4" x 1 3/8"
2 1/2" minimum box depth | | Maximum Load: | 1.5 amps | | Power Requirements: | 120 volts AC, 60Hz | | Wiring Requirements: | Single pole: Hot, Neutral, Load, Ground
3-way: Hot, Neutral, Load, Traveler, Ground | | Maximum Wiring Length: | 300' from dimmer to farthest installed remote | | Switch Type: | Single pole, 3-way (or more) applications | | Action: | Dimmer | | Lights: | Single green LED locator light
7-segment green LED brightness indicator | | Approvals: | Meets all applicable UL, CSA and FCC requirements | | Warranty: | 5 years, limited |
|
Images/Video
|
|
|
Reviews
|
|
|
Related Items
|
Customers Also Bought
|
|
|
|
|