|
|
| 8 Plug Home Theater Power Center |
| Item# 4420A |
|
|
|
|
|
|
Overview
|
- 4 switched, 4 always-on outlets
- Coax, telephone, and Ethernet protection
- Two stages of noise filtration
- $350,000 connected equipment insurance
Essential Info
You've spent a lot of money assembling your home theater system. Ensure you're getting the optimum performance from your equipment by feeding it pure, clean power. Monster's 8-Plug Home Theater Power Center cleans your power in 2 important ways: 1) noise filtration and 2) noise isolation. In addition, the Home Theater Power Center offers surge protection to ensure your expensive components aren't damaged by the huge power swings often seen on home power lines.
Manuals/Software
What's Included
Monster 8-Plug home theater power center
Instructions
|
More Info
|
Monster's Patented Clean Power StagesThe Monster 8-plug Power Center incorporates Monster Clean Power Stage 2 circuitry which filters both AC powerline noise and reduces noise generated by your connected equipment. Clean Power Stage 2 features two ultra-advanced, isolated filters that include analog and digital audio, plus an ultra-high current audio filter to provide for the best possible AC powerline noise rejection and inter-component isolation for improved component-generated noise rejection. All of these features make the HTS 1000 MKIII ideal for your home theater system.
Monster's Exclusive T2 TechnologyThe Monster 8-Plug Home Theater Power Center features exclusive Monster T2 technology, an active electronic microprocessor-controlled circuit that sits in front of the surge protection circuitry. T2 monitors the line, neutral, and ground lines and automatically disconnects the Power Center from the AC power line when a long-duration low-voltage sag or high-voltage swell occurs (continuous voltage below 80Vrms or above 132Vrms).
When the voltage sags or swells to these potentially damaging levels, ultra-fast T2 auto-disconnect protection circuitry shuts down the Monster Power Center for 15 seconds. When the under-voltage or over-voltage condition returns to normal, T2 reconnects the Power Center to full operation. If the fault condition does not clear, the T2 comparator circuit keeps the unit shut down.
Unlike ordinary power management devices, T2 will shut down your Power Center before the MOVs (Metal Oxide Varistors) and thermal fuses sense an overload condition and sacrifice themselves to protect your connected components. This will extend the Power Center's life, while providing the system protection you need.
Key FeaturesCable/Satellite/Antenna Coaxial Connections
"IN" connects the coaxial cable from either wall cable outlet, satellite dish or TV antenna. "OUT" connects the coaxial cable to input of TV, DVR, cable box, or satellite receiver.
Switched/Unswitched Outlets
4 switched outlets respond to the On/Off switch (or s low-voltage signal applied to the AC/DC IN jack), which lights up when turned to the ON position.
4 unswitched outlets (Always On) are always on.
Video Interference Reduction Filter
The unswitched outlets have a special filter circuit designed to reduce interference to your video components. Make sure to match the appropriate identification label to each component's power cord.
Digital Voltage Display
Displays line input voltage in Volts (V).
LED Indicators
Individual LEDs indicate that each unswitched outlet is receiving power when the power center is plugged into the wall outlet.
The PROTECTION ON LED indicates the internal surge protection of the Power Center is active.
The GROUND OK LED indicates the wall outlet that the Power Center is plugged into is grounded.
Telephone and Network Inputs/Outputs
Allow you to hook up telephone (RJ11) and Ethernet (RJ45) lines to protect your system against power surges coming from them.
Audio Filter
The switched Outlets have a special filter circuit that reduces noise from the AC power line going to your audio components. Match the appropriate identification label to each component's power cord.
|
Specifications
|
Specifications | | Manufacturer: | Monster Power | | Manufacturer Product No.: | MPHTS1000 MkIII | | UPC: | 050644483271 | | Dimensions: | 16.4" x 4.8" x 2.75"
Cord 8' | | Weight: | 6 lbs. | | Power Ratings: | 120VAC 60Hz
Max 15 amps, 1800w | | Total Energy Dissipation: | 6125 Joules | | Protection Modes: | Line-Neutral
Line-Ground
Neutral-Ground | | Clamping: | Level 330 volts
Response time less than 1 nanosecond | | Warranty: | 5 years, limited
$350,000 connected equipment |
|
Images/Video
|
|
|
Reviews
|
|
|
Related Items
|
Customers Also Bought
|
|
|