Overview
|
- Precision-molded curved lens for accurate reading every time
- Uses an advanced surface-mount circuit board for greater reliability and longer life
- Built-in surge protection with auto-reset
- Has no mounting height limitations
- Total UL rain-tight rating for both sensor and fixture
- Microprocessor manual override
- Lifetime Warranty
Essential Info
These sensor switches are extremely flexible. They are designed for use with one or more lights up to 600 watts. With no minimum load requirement they can be used with low wattage appliances such as fluorescent lamps, alarms and video cameras. They are rain-tight and may be mounted inside or outside.
Manuals/Software
What's Included
Raintight Motion Sensor Switch-White
|
More Info
|
The sensor has the following features: 140° detection angle, 40' range, dual zone lens with Sneak-By-Guard, adjustable aim (270° horizontal, 65° vertical), includes shrouds to customize detection zone, rain tight enclosure, UL rated IP54, adjustable time setting – 10 sec to 15 min– switching capacity 0 to 600 watts, no minimum load requirements, 120VAC. Also available in black.
Precision-molded curved lens
Unlike other thin flat lenses, the NightGUARDIAN lens is molded into a curve, so it is distortion free and water-tight. No false triggering either due to distortion or moisture problems. In fact, the entire NightGuardian unit carries a UL rain-tight rating. Unlike the competition, it does not have to be placed under an eave or in a protected area.
Advanced surface-mount circuit board for greater reliability and longer life
Similar to the circuit board circuitry used in personal computers, NightGuardian technology provides reliable, accurate performance from -40°F to 120°F. This means no false triggering due to wind, leaves and swaying branches, snow, rain and hail, barometric pressure changes or sudden temperature changes. The competition often uses 30 year-old technology, using push-through mounting of components onto the circuit board and a layer of solder to make connections between circuits. This type of circuit responds slowly and has to go through many connection points, providing many potential points of failure.
Built-in surge protection with auto-reset
Unlike the competition, the NightGUARDIAN resets itself instantly after power surges, outages and shortages. Additionally, if the competitions' product is miswired during installation, the circuitry is generally destroyed. With the NightGUARDIAN, the unit simply resets itself once the wiring connections are corrected.
No mounting height limitation
Only NightGUARDIAN can be installed at any height, even above 12 feet. With its UL rain-tight rating, NightGUARDIAN can be placed in open weather... it does not require a protected area.
Flexible detection coverage
NightGUARDIAN offers "Sneak-By Guard," which prevents intruders from sneaking under the lens. Minimum coverage distance of 40 feet, even farther in colder temperatures. Views a 140° horizontal angle that adjusts to cover any 140° in a 270° sweep, with a 65° vertical plane adjustment. Zone adjustments made easy with clip-on shrouds that allow split zones. Timing adjustable from 10 seconds to 15 minutes.
Microprocessor manual override
The competition's product will often slip into override as a result of power outages or surges, wasting electricity until you notice the unit is in override mode. With the NightGUARDIAN, the unit will automatically return to normal operation after four hours. Additionally, a red indicator light behind the lens lets you know the unit is in manual override mode, eliminating guesswork.
|
Specifications
|
Specifications | | Steinel Product No.: | IS140W | | Detection Angle: | 140° adjustable horizontal zone | | Tilt & Swivel Head: | 270° horizontal, 65° vertical aiming capability | | Reach: | 40 feet when mounted at a height of 8 feet | | Sneak-by-Guard: | Dual lens detects motion beneath sensor | | Lens Shroud: | Limit detection zone | | Manual Over-ride: | Resets to sensor mode after 4 hours | | Rain-tight Enclosure: | May be mounted anywhere (IP54 rating) | | Watts: | 60 Watts (bulb not included) | | Time Setting: | Lights shut off between 10 seconds and 15 minutes after last detected movement | | Lux Setting: | Select when light will come on; from full daylight to complete darkness (2-2000 lux) | | "Lightning Proof": | Built-in surge protection with auto-reset | | Fresnel Lens: | Precision molded lens is distortion free and watertight | | Certifications: | UL / C-UL | | Energy Star: | Energy Star compliant in night lux setting | | Lifetime Warranty: | Refer to owner's manual for details |
|
Reviews
|
|
|
Related Items
|
Customers Also Bought
|
|
View Cart 
