|
Find Similar Products in:
|
|
|
| X-Arm Automated Fully Articulating Motorized Mount for an LCD or Plasma Screen TV Display |
| Item# 43220 |
|
|
|
|
|
|
Overview
|
- Motorized mount extends, tilts, and swivels to eliminate glare and reflections by remote control
- Fits most flat panel displays with an outside width of 40" - 63"
- Tilts 7° up, 20° down, 20° - 28° to the right, 20° - 28° to the left (depends on TV size)
- Only motorized mount with UL certification
Essential Info
Make every seat in your living room the best seat in the house. The X-Arm Automated Fully Articulating Motorized Mount was designed for an LCD or Plasma TV Screen Display to sit tight against your wall, but when you use the included universal remote control, you'll be able to extend, tilt and swivel your 40 to 63 inch Plasma or LCD screen. Extend your TV up to 12 inches from the wall, tilt it 7° up and 20° down, and swivel it up to 28° to the left and right (56° total range of motion). Now you can have the best picture possible regardless of glare or viewing angle without needing to get tools or make tedious manual adjustments; you can do it all with a remote control. Simply press the buttons to eliminate irritating reflections. This ruggedly constructed wall-mount retracts to only 4.6 inches to the wall and will hold up to 180 pounds. It also incorporates bellows to conceal all of your cabling and has no visibility from the front of your TV. The X-Arm motorized mount reduces or eliminates glare and reflection at the touch of a button. Interactive DemonstrationsThese Interactive videos let you control the TV mount's motion: Viewed from the front
Viewed from the side
Video Demonstration:
X-Arm in Action
Due to excessive weight, Smarthome will add a heavy-item shipping charge to this item. This charge will be reflected in the shipping amount on the check-out page.
Manuals/Software
What's Included
Mount
Remote control
Mounting hardware
Owner's Manual
|
More Info
|
Motorized Mount Extends, Tilts, & Swivels
Use the included IR remote control or an RS232 interface to extend the X-Arm Remote Control Motorized Mount from your wall and tilt the screen up or down to your specifications. You can also swivel the screen left and right up to 56°. It even has two preset buttons on the infrared (IR) remote control that let you set up your favorite viewing positions for one-button access. Additional features include an LED display on the control box for TV size and status.
Installation
The X-Arm Remote Control Fully Articulating Motorized Mount sets up just like a manual wall mount. You'll appreciate the hidden cable management system, which allows for a clean appearance, and the control box is even removable for easy maintenance. The bellows protects the mechanism from dust & dirt, and keeps inquisitive fingers away from the works.
Flexible Control Options
The X-Arm Mount comes with its own universal remote, easily programmed to control your TV, DVD player, VCR, and cable box, by entering the code for each device. If you already have a learning remote, you can teach it the commands to control the mount. Or you can send commands to the mount using your home control software via the RS232 port.
Complete With Everything You Need
No wasted trips to the hardware store to buy screws that were so conveniently left out. Fear not - this mount comes with all hardware needed to complete the project. Not only are the screws included that hold the mount to the wood studs in the wall, but you also get a wide variety of screws to fit the various brands of flat-screen TVs out there. Note: you will need additional materials to mount in masonry or metal stud walls. Finally, it needs to be mounted on a vertical wall surface - no ceilings.
Easy Installation
Installing your motorized LCD / Plasma mount is made easier by intelligent design. Tape the included full-size template to the wall and center as needed. Locate the studs, drill one hole, and install the wall plate with one screw. Adjust as necessary to level the mount, then drill the remaining mounting holes & install the screws. Hang the mount on the wall plate, bolt the mounting brackets to the TV, hang it, then install the safety clips to finish the job. You'll need two people to lift the mount and the TV. If you'd rather have your robotic mount installed by a professional, click here to find a local certified dealer.
Adapts to Larger or Smaller Displays
If your LCD or Plasma screen's mounting pattern is between 26" and 34.5" wide, or between 18.5" and 27.5" tall, you'll need an arm extension kit, sold separately. If the display mounting pattern is less than 21.5" wide, you'll need the cross plate kit, also sold separately.
|
Specifications
|
Specifications | | Manufacturer: | CLO Systems | | Manufacturer Product No.: | X-ARM | | UPC: | 094922603906 | | Control Inputs: | IR remote control; RS232 port | | Dimensions: | 31.00" x 22.75" x 18.75" (787mm x 578mm x 476mm); remote control: 8.75" x 2.5" x 1.25" | | Weight: | 51 lbs. | | Expansion: | 4.6" collapsed; 12" expanded | | Screen Weight Capacity: | 180 lbs. (81kg) | | Display Compatibility: | Fits most flat panel displays with an outside width 40" - 61" (102cm - 155cm) - usually 37 to 63" diagonal | | Tilt/Swivel Range: | Tilts 7° up / 20° down; swivels 56° right to left (42" screen) | | Power Requirement: | 110 volts AC, 0.5 amp max | | Approvals: | UL and TUV Listed | | Warranty: | 1 year, limited |
|
Images/Video
|
|
|
Reviews
|
|
|
Related Items
|
Customers Also Bought
|
|
|
|
|