 |
Dry Contact Transmitter
�  |
|
For 220-240v, 50 Hz systems!
|
- Four Mode 3 Powerflash Interfaces In One Unit!
- Can Send ON Signals in Response to Contact Opening and OFF In Response to Contact Closure
- Use With Photocells, Thermostats, Alarm Systems compatible with 240V/50Hz power systems
|
|
This device is equivalent to having 4 X10 Powerflash Interfaces set to mode 3, input B (contact closure) in one unit. One significant enhancement is that you can reverse the input triggering sequence. The Powerflash only sends an ON in response to contact closure, but with this unit you can choose to send an OFF in response to contact closure. It has 4 input leads that corresponds to any 4 sequential X10 addresses, a common (-) and a common (+) lead. Connecting an input lead with (+) sends an ON signal, connecting an input lead with (-) sends an OFF signal. (The signal is
reversed when the contacts open). (Ivory)
Dry Contact Transmitter (Momentary Contact)
- 4 Sequential X10 Addresses
- Contact Closure Sends ON (+ lead)
- Contact Opening Sends No Signal (+ lead)
- Contact Closure Sends OFF (- lead)
- Contact Opening Sends No Signal (-lead)
- Compatible with 240V/50Hz power systems
Example Applications:
- Turn on X10 lights when door (A) opens and have them stay on even after the door is closed again.
- Turn on X10 lights when the large gauge model train passes point (X) and momentarily depresses a switch, and turn off lights when train passes point (Y).
|
Email page to a Friend
