Overview

Indoor/outdoor motion sensor runs on batteries so no wires need to be run
Kit includes outdoor floodlights & a plug-in lamp module that turns on lights and emits an audible tone
Built-in photocell allows sensor to trigger lights only at night if desired

Essential Info

You don't need to rewire your house in order to install indoor and outdoor motion-activated lighting. The Floodlight Motion Sensor w/Remote is a kit that includes outdoor floodlights and an indoor lamp module, both of which are triggered by a weather-resistant motion sensor that runs on two AA batteries (sold separately), so you can set up this system in minutes. When this motion sensor is activated, it sends an RF signal to turn on both the outdoor floodlights and the indoor plug-in lamp module, which also emits an audible alert tone, so you'll know instantly if a prowler is on your property.

Manuals/Software

Owner's Manual

What's Included

Motion sensor

Plug-in module

Floodlight fixture

2 floodlight housings

Wire nuts & mounting hardware

Instructions

More Info

Simple Plug-In Setup

Plug a lamp into the bottom of the module and plug the module into any wall outlet. The outdoor flood lights will need to be wired in; mounting hardware and a set of wire nuts are included. Thanks to a built-in photocell, you can set the motion sensor to deliver its signal only when it's dark out to save electricity. Once activated, all triggered lights will stay on for the length of time you specify, and the lamp module's audible tone features volume adjustment for comfort.

Motion Sensor Features Extra Protection

The included motion sensor features the Creep Zone® Advantage: Unlike most motion sensors, which allow an area directly beneath them to go undetected, this sensor looks down in addition to out for maximum protection. Additional features include sensitivity control and pulse count technology, which reduces false sensing from wind and rain for maximum reliability.

Additional Motion-Sensor Lights Available

If you don't need the alarm tone/lamp module, the Floodlight Motion Sensor comes with the floodlights and indoor/outdoor motion sensor. The Motion Sensor Indoor Alert System comes with the plug-in module but not the floodlights. A system is also available with two included screw-in light sockets: The single motion sensor will trigger both indoor lights to turn on when triggered, even if they're located in opposite ends of the house.

Specifications

Specifications
Heath/Zenith Product No.:	RH-6029-WH
UPC:	016963601918
Dimensions:	Motion sensor: 3" x 3 1/4" x 2 1/4"; lamp module: 3 5/8" x 3" x 1"; floods: 5 1/8" diameter x 4"
Motion Sensor Range:	70'
Transmission Range:	100'
Motion Sensor Power:	2 AA batteries
Lamp Module Power:	300 watts incandescent load
Operating Temperature:	-22° F to 120° F
Warranty:	2 years, limited

Images/Video


Floodlight Adjustable Bracket	Motion Sensor	Motion Sensor Controls	Motion Sensor Mounting Bracket

Motion Sensor Battery Compartment, DIP Switch	Plug-In Receiver and Audio Alert	AC Plug and DIP Switch	Plug-In Receiver Controls