Click for larger image and other views
|
|
|
| X10 PR511 or PHS01 X10 Motion Detector Floodlights |
|
Item# 4080XT
|
|
|
|
|
Free shipping on orders over $50 - See Details
|
|
Overview
|
- Sends motion activated signals to 4 X10 addresses
- Sends dusk activated signals to 4 X10 addresses
- Turn on lights all over your home when motion is detected in one area
- Use with a chime module as an automatic doorbell
Essential Info
X10 Motion Detector Floodlight detects motion and turns on when dark. The sensor also sends X10 signals to 8 addresses. The first 4 addresses can be set to go on when motion is detected and off after an adjustable time interval. The second 4 addresses can be set to turn on the X10 floodlights when it's dark and then turn them off at dawn. The X10 Motion Detector Floodlight photocell with adjustable sensitivity detects light level. The adjustable passive infrared sensor with 110° coverage detects motion within a 40 foot range. Requires two 150 watt incandescent, fluorescent, or halogen floodlight bulbs (sold separately).
Manuals/Software
What's Included
1x - X10 Motion Detector Floodlights
|
More Info
|
Adjust the X10 Motion Detector Floodlight settings for time delay and sensitivity to exactly fit your needs. Set the length of time that the X10 Motion Detector Floodlights stay on after movement has stopped and no further motion has been detected to anywhere between 6 seconds to 30 minutes. These motion detecting floodlights can be used to control virtually any load up to 500 watts with the use of the appropriate lighting fixtures. The floodlights use a mechanical relay much like an appliance module so the module is compatible with virtually any kind of light bulb (not included).
For easy addressing, insert an X10 Code Clicker (sold separately) into the dial wheel.
The sensor automatically senses motion over a wide area (110°) at a distance of up to 40 feet. In addition to turning on dual floodlights when it senses motion, the X10 motion detector module can turn on up to 4 X10 modules (light or appliance) in or around your home based on motion or at dusk and then off again at dawn.
You can turn on the floodlights manually using any X10 controller (such as a keychain remote or wireless switch) with an X10 transceiver or security system base receiver. When turned on manually, the floodlights stay on and the motion detection is temporarily disabled until the floodlights are turned off from an X10 transmitter. The built-in photocell prevents operation during daylight hours and senses when to turn on and off lights for dusk-to-dawn operation. The X10 floodlights can be used with the EagleEye outdoor motion sensor and a transceiver to expand its motion sensor's field of view to farther areas. You can even use the X10 Motion Detector Floodlights with a chime module so that it functions as an automatic doorbell. If you want to turn on every light with the same X10 address, install the Leviton X10 Motion Detector instead.
The completely weatherproof module features a hidden control panel and a gray finish.
Automated Floodlights In Four Simple Steps
 |  | | 1. Turn off the correct circuit breaker for the light you want to replace | 2. Remove the current lighting fixture, make a note of which wire is the ground and which is the power |
 |  | | 3. Match the ground and the power wires and connect them with the included screw caps | 4. Attach the X10 Outdoor Lighting fixture to your structure, and you're done! |
Get to know your Outdoor Lighting Home Automation System
The weather-proof X10 Dual Floodlight has a built-in Motion Detector, which will turn on the floodlights at the hint of motion. Set it in dusk/dawn mode, adjust the detection range, adjust the timed delay before the lights turn off again and more from the hidden control panel. This floodlight can even turn on up to four additional X10-enabled lights when motion is detected!
|
Specifications
|
Specifications | | Manufacturer: | X10 Pro | | Manufacturer Product No.: | PR511 or PHS01 | | Range: | 40 ft. and 110° | | Compatibility: | Use with any X10 controller (such as a keychain remote or wireless switch) with an X10 transceiver or security system base receiver | | Bulbs: | 2 incandescent, fluorescent, or halogen floodlight bulbs; 150-500 watts (sold separately) | | Time Delay: | Adjustable between 6 seconds to 30 minutes | | Weight: | 2.08 lbs. |
|
|
|
Important notes:
Only merchandise credit for defective items returned within 30 days of purchase. No other returns allowed on this item.
Manufacturer contact information: X10 USA, Tel: (800) 442-5138
|
Images/Video
|
|
|
Reviews
|
|
|
Accessories
|
|
|
Related Items
|
|
|
|
|
|