|
|
| Home Theater Lighting Control Starter Kit |
|
|
| Item# 4041 |
|
|
|
|
|
|
Overview
|
- Control lights and adjust the temperature using the remote that controls your TV and stereo
- Expandable X10 system uses an IR remote control to dim lights
- Universal remote controls up to 5 A/V components and multiple lights
Essential Info
You already use a remote control to control your home entertainment system, so why not use that same remote to control your lighting? You'll be able to dim the lights to your optimal movie-watching level without getting off your comfortable couch, thanks to the Home Theater Lighting Control Starter Kit, an easy-to-install home automation starter kit that uses X10 commands to turn lights on or off or dim them. This kit includes a five-device universal remote control, an X10 console that delivers commands from the remote to your connected lamps, and two plug-in lamp modules. The 5-in-1 RF/IR Learning Remote requires four AAA batteries (sold separately).
Manuals/Software
What's Included
X10 Command Console
Remote
2 LampLinc V2 Dimmers
Instructions
|
More Info
|
Universal Remote Control Lights As Well As A/V ComponentsYou can get rid of the remotes cluttering your coffee table, thanks to the 5-in-1 RF/IR Learning Remote. This universal learning remote will control your television, DVD player, VCR, stereo, and satellite receiver, and it also sends IR commands to the Infrared X10 Command Console, which converts those commands into X10 powerline signals to control lights anywhere in the house.
Control Any Number of X10 Lamps Using A/V RemotePlug the Infrared X10 Command Console in, and when you press the 5-in-1 RF/IR Learning Remote's X10 button, the console will deliver your X10 commands to the lamps plugged into the two LampLinc V2 Dimmers. Turn the lights on or off or dim them using this remote. You can also expand your X10 system by installing X10 modules, wall switches, thermostats or drape controllers — you'll never need to leave your couch again! The keypad on top of the console also provides direct control of up to eight X10 devices, including On/Off, Dim/Bright and All Lights On/Off.
Included Lamp Modules are INSTEON EnabledThe two included LampLinc V2 Dimmers will respond to your X10 commands to control your lights, but these plug-in modules are also enabled with INSTEON technology, which uses both the existing electrical wiring in your home as well as wireless RF signals to create the most reliable network available. Learn more about INSTEON here.
Kit Products Available SeparatelyThe Infrared X10 Command Console is also available to be purchased separately and will work with additional remote controls as well. The 5-in-1 RF/IR Learning Remote is also sold separately.
|
Specifications
|
Command Console Specifications | | Manufacturer: | X10 | | Manufacturer Product No.: | IR-543 | | Power Source: | 120VAC outlet | | Weight: | 0.63 lbs. |
Remote Control Specifications | | Manufacturer: | X10 | | Manufacturer Product No.: | PUR09 UR74A | | UPC: | 099081350500 | | Compatibility: | X10 | | Dimensions: | 7.5" L x 2.25" W x 1" D | | Approvals: | FCC compliant | | Power Supply: | 4 AAA batteries | | Warranty: | 1 year, limited |
LampLinc Specifications | | General | | Manufacturer: | Smarthome | | Manufacturer Product No.: | 2456D3, INSTEON LampLinc V2 Lamp Dimmer, 3-prong | | Warranty: | 2 years | | Operation | | Status LED: | White | | On-Levels: | 32 | | Ramp Rate (full-ON to full-OFF): | 0.125 to 9 seconds if programmed locally, 0.125 seconds to 9 minutes if programmed remotely | | Local Control: | Load sensing (can be disabled) | | Setup Memory: | Non-volatile EEPROM | | INSTEON Features | | INSTEON Addresses: | 1 hard-coded out of 16,777,216 possible | | INSTEON Links: | 417 out of 16,777,216 possible | | INSTEON Powerline Frequency: | 131.65 KHz | | INSTEON Minimum Transmit Level: | 3.2 Vpp into 5 Ohms | | INSTEON Minimum Receive Level: | 1 mVpp nominal | | INSTEON Messages Repeated: | Yes | | Mechanical | | Operating Conditions: | Indoors, 32 to 122°F, up to 85% relative humidity | | Dimensions: | 4.0" H x 2.5" W x 1.5" D | | Weight: | 5 oz | | Electrical | | Supply Voltage: | 120 Volts AC +/- 10%, 60 Hertz, single phase | | Surge Protection: | MOV rated for 150 Volts | | Power Plug: | 3-pin grounded | | Pass-through Outlet: | 3-pin grounded | | Controlled Outlet: | 3-pin grounded | | Load Types: | Plug-in incandescent lighting devices | | Maximum Load: | 300 Watts | | Minimum Load: | 25 watts (for Local Control load sensing) | | Certification: | Safety tested for use in USA and Canada (ETL #3017581) | | X10 Features | | X10 Primary Address: | 1 optional (comes unassigned) | | X10 Scene Addresses: | 255 possible | | X10 Status Response: | Supported | | X10 Resume Dim: | Supported (by setting X10 Primary Address On-Level to zero) | | X10 Powerline Frequency: | 120 KHz | | X10 Minimum Transmit Level: | 3.2 Vpp into 5 Ohms | | X10 Minimum Receive Level: | 10 mVpp nominal | | X10 Messages Repeated: | No |
|
Reviews
|
|
|
Accessories
|
|
|
Related Items
|
Customers Also Bought
|
|
|