• Receives RF signals from up to 16 individual transmitters
• Works with all X10 Home Automation RF devices (except security sensors)

This multiple device RF base works with X10's line of RF remote controls and PIR motion sensors. Wireless X10 devices need this base unit to catch the radio signals and convert them to X10 signals on the electricity line. Add as many handheld remotes and X10 wireless devices as you want to each base. As long as the transmitters are on the same house code as the base, they will all control the same devices. Be careful to have only one RF base unit or X10 security console (which also change RF signals into X10 signals for the electricity line) per housecode. If more than one base unit is used on the same house code, X10 signal collisions may result. The expandable RF Base includes a built-in appliance module which responds to unit codes 1 under the chosen house code. The appliance module can be controlled by wireless control or from another hardwired X10 transmitter. Like other Appliance Modules, it too is rated for 500 watts incandescent, 1/3 HP motor loads, and 15 amps resistive load.

• Users Manual

1x - Compact X10 Plug-In RF Receiver Base

1x - Owners Manual

X10 HR12A or PHR03 Wireless X10 Remote Control	X10 AM466 or PAM02 X10 3-Pin Appliance Module	X10 LM465 PLM03 X10 Powerhouse Lamp Module	X10 RKR24, PHR04 or KR19A X10 Keychain Remote for 2 Devices