4-Source, 4-Zone HD Video Matrix Switcher, Component and Cat. 5
Share Share Share Share Share
Rewards: 830 Points

4-Source, 4-Zone HD Video Matrix Switcher, Component and Cat. 5

Be the first to review this product

Distribute Four High Definition Video Sources to Four Zones Throughout your Home
  • Alternate high-definition video distribution between four inputs and four outputs
  • Front panel provides current input and output status via LED indicator lights
  • Using component and coaxial digital audio outputs, you can distribute HD video and audio to four zones
  • Use the Cat. 5 outputs with the component/digital outputs for eight total video outputs (two for each zone)
  • Connect up to three additional units for 16 HD video outputs (zones); 32 total outputs using Cat. 5
  • Supports resolutions of 1080p, 1080i, 720p, 480p and 480i
  • Controllable through IR and RS232 commands

Item #: 81265

Special order

Special Price: $830.77

List Price: $1,350.00

Your Savings: $519.23

  • Details
  • Specs
  • Reviews
  • What's Included
  • You don't need to install multiple satellite dishes or cable boxes in order to watch high-quality video in several locations in your home. The Xantech 4-Source, 4-Zone HD Video Matrix Switcher has four high-definition component video and coaxial digital audio inputs, and provides pristine video and audio distribution output of those signals to up to four HD monitors. Additionally, distribution output up to eight monitors is possible using the Cat. 5 outputs and a Single Gang HD Component/Cat. 5 Receiver Module, sold separately. One Cat. 5 connection corresponds with one component video connection, so if both are being used in conjunction, they will be turned on or off together as a zone. The Cat. 5 outputs and HD Receiver are typically needed for installations where the connection from the video matrix switcher to the HD monitor is longer than 250 feet; as it will work up to 1000 feet away from the video matrix switcher; how they can also be used in lieu of a component connection. Using the included infrared (IR) remote control, you can alternate between sources you wish to distribute and toggle the output of each zone on and off. You also can expand the number of zones by daisy-chaining multiple units together; a maximum of 4 video matrix switchers can be linked. Additionally, you can program macros using the included RS-232 cable. Connections to and from the 4-Source, 4-Zone HD Video Matrix Switcher require the use of Component video cables, coaxial digital audio cables, and/or Cat. 5 cable, each sold separately. If a 4-Source, 4-Zone HD Video Matrix Switcher isn't enough, consider using the 8-Source, 8-Zone HD Video Matrix Switcher.

    This unit is rack-mountable when combined with the Xantech RM2UKIT.

    Important Note: This video matrix switcher distributes one HD video feed at a time; switching sources will change the video feed for all zones.


    Cat. 5 Zone Output
    This is an output connection to the Single Gang HD Receiver module. It utilizes standard Cat. 5 cable. Be sure to verify Cat. 5 wiring connection is correct before installation

    Source Loop-through Connection
    The source inputs are buffered to provide an output at the same level as the input; i.e. Unity Gain (assuming a 75-ohm termination is on the output). Use these connections for HD88 expansion systems. The buffers are an active circuit. The HD88 must be powered on for an active connection. The jacks are color-coordinated to match the HD source component output color scheme.

    Source Inputs
    These are Gold-plated RCA jacks providing a connection from the output of a source component to the video matrix switcher. The jacks are color-coordinated to match the HD source component output color scheme.

    IR Receiver
    The rear panel IR receiver is a 3.5mm Stereo jack that is compatible with all Xantech IR receivers, such as the 291-10. Switch 4 must be in the OFF position to use this jack.

    IR Bus, Emitter Port
    The 3.5mm Mono jack is an emitter port. The IR signal is connected to the IR Receiver. A Xantech emitter can be connected to this port.

    RS232 (Serial) Commands and Expansion
    The RS232 Port is bi-directional. The communication parameters are set to 9600 Baud 8-N-1. The 4-Source, 4-Zone HD Video Matrix Switcher can be expanded into larger systems. By using any multiple (up to four) units, a larger High-Definition distribution system can be created for up to 16 Zones of Component Video and Digital Audio Distribution. The expanded units must have their own unique address. The included RS232 expansion cable allows the units to be daisy-chained via the RS232 control ports. This is done by connecting the SERIAL LINK port of the master to the XANTECH COM PORT of the other unit. The XANTECH COM PORT of the master is utilized to provide control of the entire system. Note that the Master is the main controlling unit. This unit is in charge of coordinating the communications between all expanded units. It is identified as the master by the unit address assigned to it.

  • Specifications

    Manufacturer: Xantech
    Manufacturer Product No.: HD44CC5
    UPC: 042777313723
    Dimensions: 17" W x 7 3/8" D x 3 15/16" H
    Weight: 9.25 lbs
    Power Supply: 120VAC, 0.25A, 50-60Hz, cord included
    Temperature Threshold: Up to 55° C
    Remote Controllable: Yes, via IR (remote control included) and via RS-232 commands
    Video Input: Component Video YPbPr (YCbCr); unit features gold plated RCA connectors
    Audio Input: SPDIF PCM Coaxial; unit features gold plated RCA connectors
    Active A/V Loop Thru (for Expansion):: Gold plated RCA connectors
    Resolution Support: 1080p, 1080i, 720p, 480p and 480i
    Video Output:
    • Component Video YPbPr (YCbCr); unit features gold plated RCA connectors
    • Cat. 5
    Audio Output: SPDIF PCM Coaxial; unit features gold plated RCA connectors
    Output Distance: 250 foot maximum via component video connection; 1000 foot maximum via Cat. 5 cable connection


  • Leave a Review

    You're reviewing: 4-Source, 4-Zone HD Video Matrix Switcher, Component and Cat. 5

    • 1 star
      2 stars
      3 stars
      4 stars
      5 stars

    * Required Fields

    • 4-Source, 4-Zone HD Video Matrix Switcher, Component and Cat. 5
    • Power Cord
    • Credit Card Remote Control
    • 3V Lithium Battery (for Credit Card Remote Control)
    • Expansion Cable
    • 6 foot RS232 DB9 Cable
    • Owner's Manual
place your order by 3pm PT for same day shipping

Please wait...

smarthome

Item has been added to your cart
smarthome

Item has been removed from your cart