Spend 200 & get FREE shipping to your business address Click to Shopping CartCart: 0 items ($0.00)
 Click to remove all from compare | 
Expand your Sprinkler System Using your Existing Irrigation Controller and Wiring
DuWa Products 8ZEXS Irrigander 8 Pro Expander
DuWa Products 8ZEXS Irrigander 8 Pro Expander
Click for larger image and other views
Installation Diagram
DuWa Products 8ZEXS Irrigander 8 Pro Expander
Item# 31381
Free shipping on orders $200 and up details

Overview

  • Control additional irrigation valves without adding new field wiring
  • Control 8 valves using just 2 field wires
  • Designed specifically for high reliability in retrofit installations
  • Add additional zones to any irrigation system with available outputs on the irrigation controller
  • Each of the valves controlled by the Irrigander 8 Pro expander can be individually tested for easy system maintenance

Essential Info

The Irrigander 8 Pro Expander is an 8 zone irrigation expander designed to expand medium size systems that have enough outputs available on the irrigation controller to drive the additional zones. The Irrigander 8 Pro Expander uses proprietary Irrigander 2-wire Technology.

  • Control up to 8 zones using just 1 field wire plus common
  • Each Decoder output can drive up to 1 amp (2 valves)
  • Decoder is sealed to protect it from moisture
  • Metal oxide varistor surge suppression technology
  • Industrial grade components for maximum reliability


  • Important notes:
    • Smarthome does not offer technical support on this product, please contact the manufacturer directly for all product support.
    • Only merchandise credit for defective items returned within 30 days of purchase. No other returns allowed on this item.
      Manufacturer contact information:
      DUWA PRODUCTS, LLC
      Tel: (866) 984-7744 Ext 702

    Manuals/Software

    More Info

    The Irrigander 8 Pro Expander is comprised of two types of modules: an Encoder that is installed close to or inside the sprinkler controller; a Decoder that is installed close to the valves to be controlled. One dedicated field wire is attached to the Irrigander 8 Pro Expander's output. The 8 inputs to the Encoder are connected to any available 8 irrigation controller outputs. The dedicated field wire and the system wide common wire are connected to the Decoder and the outputs from the decoder are connected to the valves to be controlled. If more than 2 field wires are available, the remaining field wires can be used to drive additional valves. Add optional Irrigander Surge Suppressors to minimize potential damage from lightning.

    Specifications

    • Power Requirements:24 -30 VAC provided by irrigation controller
    • Power: idling 0.3 watt, operating: 1.0 watt max
    • Valves per Zone: Each output from the Irrigander 8 Pro expander’s Decoder can drive 1 or 2 valves. Connecting more than 2 valves to any single output may cause improper operation and may cause the protection fuse to open in the Encoder.
    • Supported Irrigation Valves: Any 24 VAC solenoid activated irrigation valve can be used. DC low voltage valves should not be used.
    • Supported Irrigation Controllers: Virtually any irrigation controller that uses 24 VAC valves and a common connection on the output can be used.
      Operating Range: The Irrigander 8 Pro expander Decoder can be located up to 850 feet from the Encoder using 18 gauge field wiring or 2000 feet using 14 gauge field wiring. The valves to be controlled can be up to 100 feet from the Decoder using 18 gauge wiring.
    • Simultaneous Active Zones: The Irrigander 8 Pro expander can only have one output active at a time. If more than one input from the irrigation controller is active, the Irrigander 8 Pro expander will only activate one output zone.
    • Encoder Environmental Specifications: Operating: 0°C to +50°C (+32°F to +122°F) Non-Operating: -40°C to +70°C (-40°F to +158°F) The Encoder is not waterproof; enclose the Encoder unit in a suitable weather proof enclosure if installed outdoors.
    • Decoder Environmental Specifications: Operating: -20°C to +50°C (-4°F to +122°F) Non-Operating: -40°C to +70°C (-40°F to +158°F) The Decoder is designed for harsh environments and is suitable for most outdoor conditions including wet environments. However the decoder should not be placed where it is operated continuously under water.
    • Warranty:DUWA PRODUCTS LLC, hereinafter referred to as the manufacturer, warrants the Irrigander 8 Pro Expander to be free from defects in workmanship and materials for 1 (one) year from the date of sale.

    Images/Video

    Installation Diagram       
    Installation Diagram       

    Reviews

    Sign-up for Exclusive Email offers 
    ORDERING
    How to Order
    Track Your Package
    Shipping Info
    Return Policy
    Smarthome Retail Store
    Security & Privacy
    MORE INFO
    Frequently Asked Questions
    Learning Center
    Getting Started
    Dealers
    Customer Testimonials
    Affiliate Program
    Got a Killer Product? Sell it Here
    ABOUT SMARTHOME
    About Us
    INSTEON for the Smart Grid
    SmartLabs
    INSTEON
    Press Room
    Awards
    Careers
    MORE SMARTHOME
    Smarthome Forum
    RSS
    Email Newsletter
    Free Catalog
    Smarthome Guarantees
    Site Map
    Having difficulties with this page? Call us at 800-762-7846 (Mon-Fri 9:00am-9:00pm and Sat 10:00am-4:00pm ET) or send us a message
    Place your order by 6:00pm ET for same day shipping.
    Copyright 1995-2012 SMARTHOME
    RSS Feed
    Verisign Secure Site Shop ENERGY STAR at Smarthome Google Checkout Acceptance Mark PayPal Acceptance Mark