• Use with EZFlora to connect a rain sensor or water meter
• Use with IR sensors to extend the distance to the connecting block
• Easily connect sensors from one location to another with pre-terminated patch cable
• Use one EZBreakout Connector per zone you need to monitor and connect up to 4 alarm contacts

The EZBreakout Connector allows you to simply connect a CAT5 or CAT3 patch cable with its RJ-45 or RJ-11 terminations and split up the wires into screw down terminals. This breakout connector is ideal for adding a rain sensor or water meter to the EZFlora Irrigation Controller, or to easily connect any sensor to an input device using a pre-terminated patch cable.

Applications:

• EZFlora
  
  • The EZBreakout Connector makes connecting a rain sensor and water meter to the EZFlora very simple. Simply connect a CAT5 patch cable to the RJ-45 input on the EZFlora and the other end into the EZBreakout Connector, and connect your sensor and meter to the appropriate terminals!
• EZIOxx
  
  • With the EZBreakout Connector, you can use regular patch cable (pre-terminated CAT5 cable with RJ-45 connectors on each end) to extend the input terminals of any EZIO device.
• EZIO8SA
  
  • The EZIO8SA has a 1-Wire input that accommodates a DS18B20 temperature sensor, and connects via an RJ-12 or RJ-11 connector.
• Third Party Uses
  
  • IR Redistribution - Use the EZBreakout Connector to extend IR receivers with patch cable.
    
  • Alarm Sensor - Use one EZBreakout Connector per zone you need to monitor and connect up to 4 alarm contacts.

• Smarthome does not offer technical support on this product, please contact the manufacturer directly for all product support.
• Defective exchanges for identical item within 30 days of purchase. After 30 days, please contact the manufacturer.

• Owner's Manual

EZRain INSTEON/X10 Sprinkler Controller	EZIO 2 Input/4 Output Relay Controller	EZIO40 Insteon 4 Output Relay Load Controller	Niles Audio Corp. RJ-45 Adapter for Cat5 IR Sensors

EZFlora INSTEON/X10 Sprinkler Controller	I/O Linc - INSTEON Low Voltage / Contact Closure Interface ( 1 In / 1 Out )	Skylink Wireless INSTEON Motion / Occupancy Sensor	SignaLinc - INSTEON Phase Coupler, Hardwired