Spend 200 & get FREE shipping to your business address Click to Shopping CartCart: 0 items ($0.00)
 Click to remove all from compare | 

Control Your Water Heater or A/C with INSTEON
EZSwitch30 INSTEON / X10 30A Controller
EZSwitch30 INSTEON / X10 110/220V 30A Controller
Click for larger image and other views
Interior View Set Button & LED
EZSwitch30 INSTEON / X10 110/220V 30A Controller
Item# 31278
Free shipping on orders $200 and up details

Overview

  • Maximum current capacity of 30 Amps controls large appliances
  • Dual relays control 110 or 220 volts
  • Small size affords installation in tight spaces or existing panels
  • Accepts INSTEON or X10 commands

Essential Info

Do you need to control an air conditioner, pool pump or electric water heater via INSTEON? The EZSwitch is a high current (30 Amp) relay module that responds to INSTEON and X10 On/Off commands sent through the power line. The module contains dual relays with available normally-open or normally-closed contacts. Thus, it is possible to switch both legs of a 220VAC 2-phase circuit, and control the load to be activated with either ON or OFF commands. Activating with OFF commands might be desirable in cases where a failure in the switch would leave the load energized. The module derives its internal power and communicates with the INSTEON network from the neutral and line 1 (hot) connections. Operation is similar to the INSTEON ApplianceLinc V2. The EZSwitch30 has a built-in power line interface and its programming and control are done through the power line.

While all the basic functions can be programmed manually, there are advanced programming options that you can achieve with the EZSrve, central automation controller. If you already have a central automation controller or a software package for your INSTEON network that doesn't have the correct parameters to program the advanced functionality of this device, you can download the free Simplehomenet Utility Suite which works in conjunction with an INSTEON Powerlinc Controller. (Note: The Simplehomenet Utility does not interface with the INSTEON Powerlinc Modem.)


Important notes:
  • Smarthome offers technical support on this product. We offer (2) ways to contact us for technical support: CHAT (homepage button: Mon-Fri 9:00am-6:00pm ET) or Phone: 1-800-762-7846 (Mon-Fri 9:00am-9:00pm & Sat 10:00am-4:00pm ET)
  • Defective exchanges for identical item within 30 days of purchase. After 30 days, please contact the manufacturer.

Manuals/Software

What's Included

  • EZSwitch30 INSTEON / X10 30A Controller
  • Instructions
  • More Info


    World's First Heavy Duty INSTEON Relay
    While there are relays available for loads up to 10 Amps, this is the first device on the market that can control heavy current demands up to 30 Amps via INSTEON. Now you can remotely and automatically control air conditioners, water heaters, and other high-draw devices.

    Local ControlMount the EZSwitch30 on or near the appliance you want to control; you can then turn the appliance on or off locally by pressing the set button on the side of the EZSwitch30.

    Easy ConnectionsThe EZSwitch30 has a built-in connection block with screw terminals. Just insert your stripped wires and tighten the screws, and you're ready to control your world.

    INSTEON CompatibleThe EZSwitch30 Controller is fully INSTEON compatible. INSTEON is a powerful home-control networking technology. INSTEON messages are transmitted throughout your home both wirelessly and through the home's existing wiring. All INSTEON messages are confirmed and repeated by INSTEON devices in the network, contributing to the outstanding reliability and performance of INSTEON products.

    X-10 compatibilityThe EZSwitch30 also works with legacy X10 products. If you have an existing X10 network, the Controller works with your X10 products and provides an upgrade path to an INSTEON network.

    Free Utility SoftwareDownload the free SimpleHomeNet Utility Suite software by clicking here.

    Specifications

    Specifications

    Manufacturer:SimpleHomeNet
    Manufacturer Product No.: 4030A
    UPC:793573453877
    Patent No.:U.S. Patent No. 7,345,998, International patents pending
    Dimensions:4" (5 1/4" including mounting flanges) x 2" x 2 3/4"
    Power Capacity:110 or 220VAC, max 30 Amps
    Approvals:Safety tested for use in USA and Canada (ETL #3101836)
    Warranty:1 year, limited



    Images/Video

    Interior View  Set Button & LED     
    Interior View  Set Button & LED     

    Reviews

    27 Ratings
    5 star: 56%  (15)
    4 star: 15%  (4)
    3 star: 11%  (3)
    2 star: 4%  (1)
    1 star: 15%  (4)
    Average Customer Rating
    (27 customer ratings)
    Share your thoughts with other customers
    JOSHUA -- urbana, IL   10/15/2009
    Grrrrrrrrrreat
    PHILLIP -- morrison, CO   8/30/2009
    Not happy with the x10 compatibility of this device. It does not respond at least 30 percent of the time. I talked to the manufacture of this and there response was "X10 is not it's primary protocol" Very lame. They should stop promoting the device as X10 compatible.
    STEVEN -- merritt island, FL   6/8/2009
    hooked up in parallel to my existing intermatic mechanical timer. now can easily turn on the pump remotely. device is like any Insteon device, easy to setup and use
    DAVID -- waterlooville, XX   5/31/2009
    Was a bit fiddly getting the wires in for the pool pump when installed ina a waterproof box. Would like a version to go on to the water heater which has a 250v supply.
    HAMILTON -- raleigh, NC   1/11/2009
    Totally satisfied with product
    TIMOTHY -- cedar rapids, IA   12/19/2008
    I used this to switch an outdoor GFI outlet. So far it is working great.
    KIM -- san francisco, CA   11/30/2008
    Saving a ton on my vacation home water heater bills - excellent!
    JAMES -- aurora, IL   7/12/2008
    So far it seems to be working
    PERRY THE -- campbell, CA   5/8/2008
    Works as advertised. Should have screw terminals for ground connection (input to output); there's not really enough room in there for a wire nut.
    GUSTAVO A B -- barueri, XX   12/27/2007
    not work with load, hangs all the time!
    JEFFREY -- orlando, FL   12/20/2007
    I'm very happy with the product, but I wish the directions were more helpful with installation. Why can't they provide some instructions for for two or three installation scenarios? (I'm trying to install my EZSwitch30 on my water heater, which doesn't have a neutral wire, and is thus complicated.)
    Pmo -- USA   4/5/2010
    I needed a good insteon device to control 220VAC for a hot water heater. There are only two turnkey solutions - EZswitch30 or ELK. I purchased the EZswitch30 because it was smaller than the ELK. I'm not sure that this was the correct choice. Issues with the EZswitch30 - terminals are weak and may not support 10 gauge wire stress - no indicator light to show on/off status - no easy way to connect wires through a conduit - I can't believe that unprotected wires into the side of this box would meet code - REQUIRES a neutral --- well not all 220VAC wiring has a neutral - I used the ground since it is a home run to the panel - but that is a hack - the alternative is to pull more wire. - communications to the unit seems unreliable - about 50% sucessful communications - no X-10 bridge - my purpose in adding the EZswitch was to IMPROVE reliability of communications to the hot water heater control but now my remaining X10 devices are LESS reliable because I replcaced the 220VAC X-10 switch that had a bridge The ELK is bigger, but may be more reliable and wooud not have the probem with no neutral - BUT this one will require a nearby 110VAC outlet. EZswitch is recognized b the ISY-99i but not by the Houseinc2 which I have running as a backup controller. Before this purchase I was tempted to build my own unit much like the ELK, but I felt that a turnkey solution would be less effort!
    Pbl -- denver, Colorado   8/23/2009
    Installed to controll swamp cooler. Old x10 modules worked with every time out a hitch for 5 + years. This device does not respond about 30% of the time. Leaving the swamp cooler either on or off for until reset. For as much as this cost I extected better.
    Peter -- Ohio   8/16/2008
    Great product! I am controlling two electric water heaters without a problem. The size is amazingly small for what it does given that it packs two relays!
    eRouterZone, Inc. -- New York   8/15/2008
    I highly recommend this well-built product and Simplehomenet as a responsive manufacturer. My switch had a frequent lock-up issue when turning on an A/C unit and I called the manufacturer directly. Their response was fast and direct and indicative of their genuine customer orientation. Happily, my installation is now working flawlessly and Simplehomenet has put the fix in their production to totally eliminate the lock-ups. It’s refreshing to see companies stand behind their products so passionately. Simplehomenet has also posted the issue on their support forum with an offer to fix any unit exhibiting this symptom. -eRouterZone, Inc.
    Peter H -- encinitas, CA   1/9/2008
    Purchase the product to control a Pool Pump. Unit hangs 30% of the time, requiring a power reset.

    Related Items

    Sign-up for Exclusive Email offers 
    ORDERING
    How to Order
    Track Your Package
    Shipping Info
    Return Policy
    Smarthome Retail Store
    Security & Privacy
    MORE INFO
    Frequently Asked Questions
    Learning Center
    Getting Started
    Dealers
    Customer Testimonials
    Affiliate Program
    Got a Killer Product? Sell it Here
    ABOUT SMARTHOME
    About Us
    INSTEON for the Smart Grid
    SmartLabs
    INSTEON
    Press Room
    Awards
    Careers
    MORE SMARTHOME
    Smarthome Forum
    RSS
    Email Newsletter
    Free Catalog
    Smarthome Guarantees
    Site Map
    Having difficulties with this page? Call us at 800-762-7846 (Mon-Fri 9:00am-9:00pm and Sat 10:00am-4:00pm ET) or send us a message
    Place your order by 6:00pm ET for same day shipping.
    Copyright 1995-2012 SMARTHOME
    RSS Feed
    Verisign Secure Site Shop ENERGY STAR at Smarthome Google Checkout Acceptance Mark PayPal Acceptance Mark