Works Very well and as advertised. I wish INSTEON would Repeat X10 signals, but that is another issue not related to this product.The X10 Signals the EZX10RF recieves from my Palm Pads are received from a greater distance, and received without the need for any other Clunky X10 Transmitters. They are then converted to Insteon which is a much more reliable signal, so everything works better. I have phased out 99% of my X10 in favor of a Large Insteon Home Network, however I cannot forsee anything in the pipeline that would allow me to get rid of my Palm Pads(HR12A), so the EZX10RF should be an essential part of my Insteon network for a long time. I just wish Product Designers would quit going out of their way to make things hard. More people would use them if they made it easier. Simple things like making a Usable House Code Dial for the Palm Pad! Very Simple but the current design makes the palm pad only usable for a single X10 House code. Not everyone likes or wants a Remotelinc, and a some of the other Keypadlincs, etc do not control as many individual devices as the Palm Pad does, so all in all their designs are headed in the wrong directions. Not everyone wants just a 6 button Scene Controller. Palm Pad at least gives you 16 easily and should have been functionally designed to give you 256.

This was a replacement for the first unit that didn't work. Prompt and courteous customer service for the exchange. Only disappointment is that the range is very limited - maximum of about 20' yet advertised as much longer range. Still fulfills my requirements.

Got this so I could use my new car's HomeLink to control my Insteon.

The instructions were a little confusing but once you get the unit programmed it works as advertised, allowing wireless control of all Insteon linked devices.

Increased range. Allows me to use my X-10 remotes to activate my INSTEON modules.

Dramatic increase in recieve range!

Works well - above expectations...

First unit had no wireless connectivity. Interestingly, the replacement unit weighed significantly more! The replacement unit worked but operation and programming was erratic. The problem was that these units do NOT work with GFI circuits. A note in the instructions would have saved me a lot of time and trouble resolving this issue. But wait, plugged in a small wall wart for cordless phone charger in the pass through outlet and operation was again erratic and range less than 15 feet! These units don't work or at least don't work well with a wall wart plugged in the pass through outlet or even plugged into the other free outlet. I confirmed this with a call to the Insteon Support line. They also warned that circuits with arc suppressor breakers can also be problematic. Come on Smarthome how about a warning in the instructions to save everyone the time and trouble of figuring this out!?