Overview
|
- Easy installation takes only minutes
- Allows any relay or contact closure input to control devices in your INSTEON network
- Two outputs let you control both AC and DC loads with INSTEON commands
Essential Info
SimpleHomeNet's INSTEON-compatible EZIO 4 Input/2 Output Relay Controller (EZIO2x4) can be used to monitor and control low voltage devices such as contact closures, outdoor lights, appliance relays and alarm systems in your INSTEON/X10 home automation network. The Controller allows virtually any device connected to its inputs to send INSTEON signals. Connect a garage door contact closure to the device and never enter a dark house again. The Controller will activate an INSTEON lighting scene to welcome you home whenever the garage door opens. In addition to lighting control, there are a myriad of conveniences the Controller can provide in your INSTEON network. Have a doorbell ring flash all the lights in your house so you won't miss any important visitors or package deliveries or have a motion detector notify your security system of intruders. The possibilities are endless.
Manuals/Software
What's Included
EZIO 2 Input/ 4 Output Relay Controller
|
More Info
|
With four inputs, you can monitor external events, such as a garage door contact closures and temperature sensors. The 2 dry-contact relay outputs allow you to send out preprogrammed INSTEON group commands to any device in your INSTEON network or any device connected to the unit's outputs used to control low voltage 120 Volt AC (up to 0.5 Amps) or 12 Volt DC loads, such as furnace heaters, chimes and more. The device also acts as a repeater of powerline INSTEON signals.
Smart Drapes
Want to save energy by having your blinds work for you? Use a temperature sensor with your EZIO2X4 so that you can send signals when a specific temperature is reached. Have the Controller lower your motorized drapes and turn on the air conditioner when the thermostat hits 75 degrees. Stay cool without moving a finger.
Hearing Impaired
Use the EZIO2X4 to send different kinds of signals, like flashing lights, to make sure you know what's happening in your home. Whether you are in a location in your home that is far from the doorbell or are hearing impaired, have the IO Controller flash your lights whenever the doorbell rings so you won't miss any important visitors or package deliveries.
Do More With Software
The on-board memory allows you to set timers to trigger events on the outputs to last for 1 to 255 minutes and a free software download is available for easy programming. The device can be set-up and operated using the free downloadable Set-up and Configuration Utility.
INSTEON Compatible
The EZIO2X4 Controller is fully INSTEON compatible. INSTEON is a powerful home-control networking technology. INSTEON messages are transmitted throughout your home both wirelessly and through the home's existing wiring. All INSTEON messages are confirmed and repeated by INSTEON devices in the network, contributing to the outstanding reliability and performance of INSTEON products.
X-10 compatibility
The EZIO2X4 also works with legacy X10 products. If you have an existing X10 network, the Controller works with your X10 products and provides an upgrade path to an INSTEON network.
An 8-output, 7-input IO Relay Controller (31273P) is also available. Below is a table comparing the common features of the EZIO2X4 and the EZIO8SA to help you select the best unit for your application.
Free Utility SoftwareDownload the free SimpleHomeNet Utility Suite software by clicking here.| | EZIO2X4 (31274) | EZIO8SA (31273P) |
|---|
| Number of Outputs: | 2 | 8 | | Type of Outputs: | Relays (normally open) | Relays (both normally open and normally closed provided) | | Output ratings: | 30VDC/120VAC, 0.5A |
24VDC/120VAC, 3A | | Output Uses: | General-purpose contact closures of small loads limited by relay voltage and current rating. | General purpose contact closure of larger loads limited by relay voltage and current rating. | | Number of Inputs | 4 | 7 |
| Type of Inputs | 2 Opto-isolated (3-30VDC), 2 digital or analog (0-5VDC) | 4 Opto-isolated (3-30VDC), 2 digital or analog (0-5VDC), 1 digital programmable as 1-Wire bus for temperature sensor. | | Input Uses: | Contact closures, Digital and Analog DC Voltage sources. Isolated outputs. | Contact closures, Digital and Analog DC Voltage sources. Isolated outputs. 1-Wire temperature sensors. | | INSTEON Links | 31 | More than 512 (external PLM) |
|
Specifications
|
Specifications |
| Compacta International LTD Product No.: | EZIO2X4 - 5010D | | UPC: | 79357342310 | | Dimensions: | 4.0" H x 2.5" W x 1.5" D (excluding external valve connector) | | Weight: | 5 oz. | | Setup Memory: | Non-volatile EEPROM - up to 30 links | | INSTEON Addresses: | 1 hard-coded out of 16,777,216 possible | | INSTEON Links: | 417 | | INSTEON Messages Repeated: | Yes | | X10 Primary Address: | 1 optional (comes unassigned) | | Operating Conditions: | Indoors, 32 to 122°F, up to 85% relative humidity | | Supply Voltage: | 120 Volts AC +/- 10%, 60 Hertz, single phase | | Surge Protection: | MOV rated for 150 Volts | | Power Plug: | 3-pin grounded | | Pass-through Outlet: | 3-pin grounded | | Controlled Outlet: | 3-pin grounded | | Maximum Load: | 480 Watts | | Maximum Amps: | 15 Amps (for resistive loads) | | Certification: | Safety tested for use in USA and Canada (ETL #3017581) | | Warranty: | 1 year |
|
Images/Video
|
|
|
Reviews
|
|
|
Related Items
|
Customers Also Bought
|
|
View Cart 
