• Receives all 256 house/unit code addresses
• Supports UPB link mode, up to 64 LIDs
• Supports direct mode, up to 256 DIDs with bright, dim, on & off commands
• External antenna package for maximum range
• Custom command mapping via configuration program

Ever wanted to turn on your UPB controlled table lamp with a hand held RF remote like X10's palmpad? Now you can activate UPB links or direct control individual UPB devices with the WGL Designs 30097 X10 Wireless to UPB Transceiver Module. RF signals are generated by X10 compatible remote devices: palmpad remotes, key chain remotes, HawkEye motion detectors, and others. These signals are received by a quarter wave whip antenna and presented to a very sensitive 310Mhz receiver internal to the UPB572 module. This data is then mapped to specified UPB addresses, Link ID, Direct ID and Network ID. The correct command is then sent to a UPB PIM which in turn broadcasts to the household power wiring in the UPB format. Any lamp module or other UPB device that has a matching address will then respond to the command that originated when you pushed a key on your PalmPad.

• Smarthome does not offer technical support on this product, please contact the manufacturer directly for all product support.
• Defective exchanges for identical item within 30 days of purchase. After 30 days, please contact the manufacturer.

WGL Designs X10 Wireless to USB Transceiver Module	WGL Designs Rain8net Pro Sprinkler Controller with RS232