• To be used with Aquadue Duplo Water Timer Only (#3107)
• Automatic timer shut-off
• Accurate rain measurement

Avoid unnecessary wastage of water by turning off sprinklers when raining. The system will shut down when the internal flow reaches a total level of 2 oz. Programming will resume when the water evaporates. To connect, simply remove the front panel of the Duplo water timer by pressing the 2 side buttons and slide the connector onto the far left prongs. Supplied with a stainless steel wall bracket, install the sensor in a clear area up to a distance of 6’ from water timer without any type of vegetation coverage and away from sprinklers. It is important to keep the orange over in place to keep out leaves and/or impurities that could impair operation. The unit is designed to operate with the #3107 Duplo 2-line water timer only and is sold separately.

• Owner's Manual

Rain Sensor

Stainless steel wall bracket

6.5' of cable

Sprinklers & Watering Products	Aquadue Duplo Automatic Programmable Watering Timer, Two Lines and Three Cycles	Logica Garden Watering Drip Kit	Aquano Practico Programmable Automatic Watering Timer, One Line
Aquano Video 6 Programmable Automatic Watering Timer - One Line and Six Cycle	Aquano Video 2 Programmable Automatic Watering Timer, One Line and Two Cycles	Aquauno Logica Automatic Watering Timer, One Line and 15 Preset Cycles

Aquadue Duplo Water Timer	Sony Platinum Alkaline 9V Battery	6-Station Sprinkler Timer With Remote	Aquauno Video 2 Water Timer