|
|
| Venstar Remote Indoor Temperature Sensor with Override |
|
Item# 30423
|
|
Price: Normally $59.99
Hot Deal $43.75
|
|
|
|
|
|
Free shipping on orders $200 and up details
|
|
Overview
|
- Sensor remotely measures air temperature in a different room than main thermostat
- 'OVERRIDE' button will place the thermostat into the override mode for up to four hours
- Connects via cat. 5 or cat. 6 cable to a compatible Venstar thermostat
- Handles a cable connection for distances up to 250 feet away
- Temperature range of 32° F to 99° F (@ 0% - 95% humidity)
Essential Info
The Venstar Remote Indoor Temperature Sensor with Override measures indoor air temperature from 32° F to 99° F at a location separate from the thermostat. Additionally, the remote sensor has an 'OVERRIDE' button which will place the thermostat into the override mode for up to four hours (see note below). The remote sensor will work with Venstar T1800, T1900, T2700, T2900, T2900SCH and T2300FS thermostat; each sold separately. It should be connected to the thermostat using solid conductor cat. 5 or cat. 6 type network communication cable, and can be used for applications where the sensor may be up to 250 feet away from the thermostat. This device will sense room temperature where it is installed, providing a temperature reading and show a blinking degree icon next to the temperature display on a compatible thermostat. Please Note: For information on override operation please consult the Owner's Manual of your thermostat.
Important notes:
- Smarthome does not offer technical support on this product, please contact the manufacturer directly for all product support.
- Defective exchanges for identical item within 30 days of purchase. After 30 days, please contact the manufacturer.
Manuals/Software
What's Included
Venstar Remote Indoor Temperature Sensor with Override
Battery
Owner's Manual
|
More Info
|
Sensor Locations
Correct Locations: The Remote Sensor should be mounted approximately five feet from the floor, close to or in a frequently used room, preferably on an inside partitioning wall or on a section of wall without pipes or ductwork. Mount the sensor where temperature operating limits are within 32° to 99° F and the humidity operating range is within 0 to 95% relative humidity, non-condensing.
Incorrect Locations The Remote Sensor should NOT be mounted close to a window, on an outside wall, or next to a door leading to the outside. Do not mount the sensor in a location where it would be exposed to direct light and heat from a lamp, the sun, a fireplace, or any other temperature-radiating object which may cause a false reading. Finally, do not mount the sensor close to or in direct airflow from supply registers or return air grilles and in areas with poor air circulation (such as behind a door or in an alcove).
Please Note: Do not run sensor wiring in the same conduit as the 24VAC thermostat wiring. Electrical interference may cause the sensor to give incorrect temperature readings.
|
Specifications
|
Specifications | | Manufacturer: | Venstar | | Manufacturer Product No.: | ACC0401 | | Dimensions: | 1.37" W x 1.75" T | | Temperature Range: | 32° F to 127° F (-10° F to 127° F using Lithium batteries); @ 0% - 95% humidity | | Connection: | RJ-45 output port, to be used with CAT5, CAT5e, or CAT6 network communication cable | | Maximum Wiring Distance: | 250 feet | | Compatibility: | Venstar T1800, T1900, T2700, T2900, T2900SCH and T2300FS thermostats | | Mounting Location: | Indoor or outdoor installation |
|
Reviews
|
|
|
Accessories
|
|
|
Related Items
|
Customers Also Bought
|
|
|
|