Overview

Adapters allow coaxial cable to connect home network devices
Connect computers, surveillance cameras, game consoles and media servers
Expandable system allows up to 9 adapters in home

Essential Info

Create a home network without running cat. 5 cable through your walls. By taking advantage of the coaxial cable that delivers your cable programming, you can connect computers, game consoles, or even surveillance cameras without disturbing your cable TV. The Ethernet-Over-Coax TVnet/C Pro adapters are compatible with Windows, Mac, and Linux-based computers. This master unit is required for creating this network; up to eight target units are available and sold separately. Connect one to any available TV coax at a wall plate to transform that cable into a reliable and secure IP network. Sold separately, a DSL or cable modem is required for this system.

Manuals/Software

What's Included

Master unit

Power adapter

Coax connector

Instructions

More Info

Easy Installation in Seconds

Installing a local area network in a home used to involve running cat. 5 cable through walls. The Ethernet-Over-Coax TVnet/C Pro system reduces installation time and effort significantly, because there is no rewiring necessary, no switch or IP settings, and no software required. It simply expands the functionality of the coaxial cable that already exists in your home. This system is truly plug-and-play: After connecting a TVnet adapter to the video or broadband source, all coax jacks throughout a home become network-enabled. Within seconds, you'll be able to share peripherals and files, add Internet access to any computer, and even connect your home theater devices to this network.

Connect Any Network-Enabled Device

If your components are network-enabled, you'll be able to add them to your new home network. Connect home theater equipment, surveillance cameras, game consoles, even VoIP handsets and MP3 players for instantaneous access from any connected computer.

Connecting to an Ethernet Switch

While each TVnet/C Pro network supports one Master and up to eight Target adapters, it is not necessary to have one adapter per Ethernet device. Just as with cat. 5 IP networks, an Ethernet switch/router may be used to increase the number of digital devices in any given room. Just connect one end of an Ethernet cable to the Master or Target and the other end to the uplink port of your switch/router.

Note: This network is not compatible with DIRECTV or other satellite systems.

Specifications

Specifications
Manufacturer:	Coaxys
Mfgr Product No:	TVNET/C PRO MASTER
UPC:	185193000720
Dimensions:	6.3" x 5.4" x 1.1" (161mm x 138mm x 30mm)
Weight:	.46 lb. (0.21kg)
Master Units:	1 max.
Target Units:	8 max.
Speed:	95Mbps Master-to-Target; 76Mbps Target-to-Target
Connectors:	"To TV" coax, "To Wall" coax, Ethernet (RJ45), Power
LEDs:	Power, Ethernet (RJ45) Link, Coax Link
Topology:	Works with RG-6 and RG-59 coax, works with splitters
Performance:	100 Mbps minimum sustained throughput at the network layer; less than 20 microseconds latency
Loss Budget:	50dB adapter to adapter inclusive of coax, splitters, couplers
Standards:	10/100 Ethernet (IEEE 802.3u)
Latency:	<0.02 ms
Bit Error Rate:	<1 x 10(9)
Power Adapter:	12VDC, 500mA
Distance Between Connections:	300 feet typical from Master to each Target, inclusive of splitters, or 50dB of path loss
Spectrum:	Operates above 1GHz; does not conflict with CATV
Operating Temperature:	-32° F to 122° F (0° C to 50° C)
Storage Temperature:	-4° F to 176° F (-20° C to 80° C)
Regulatory Compliance:	FCC Part 15, ICAN Class B; CSA ICES-003, Class B; U/L Certified