- What's Included
The Thin Door/Window Contact sensor from 2GIG Technologies can be installed on windows, doors, and many other objects that open and close around a home or office. The Door/Window Contact sensor transmits signals to the 2GIG Go!Control Panel (service plan available for remote monitoring) when the magnet is separated from the sensor. The sensor has an external input that accepts Normally Closed dry contact devices and the sensor is equipped with a tamper-resistant cover for additional security. The sensor and magnet should be mounted at least 4.7" above the floor to avoid damage and they should be not be mounted in an area where they will be exposed to moisture. Two included CR2032 batteries (included) power the Thin Door/Window Contact.
* Monitoring and remote management options of 2GIG Go!Control Panel start as low as $25/month. No credit check or long term contract is required. Prices are determined by the level of functionality desired by the customer. Mention Smarthome when setting up to receive the Smarthome special discount.
Specifications Manufacturer 2GIG Technologies Manufacturer Product No. 2GIG-DW10-345 UPC 093863118319 Sensor Dimensions L 2.59in x W 1.03in x H 0.49in Magnet Dimensions L 1.3in x W 0.435in x H 0.312in Weight (including battery & magnet) 1.1oz Wireless RF Signal Range 350 feet, open air, with 2GIG Go!Control Panel Code Outputs Alarm, alarm restore, external alarm, external restore, tamper, tamper restore, supervisory, low battery Transmitter Frequency 345.00 MHz (crystal controlled) Transmitter Frequency Tolerance +/- 15 KHz Transmitter Bandwidth 24 KHz Modulation Type Amplitude shift keying-On/Off keying (ASK-OOK) Unique ID Codes Over 1 million different code combinations Supervisory Interval 70 minutes Peak Field Strength Typical 36,000 uV/m at 3m External Input Sampling Current 20 uA External Input Accepts N/C dry contact devices Reed Switch Magnetic Sensitivity 10 to 20 amp turns Reed Sensitivity 0.625in minimum gap, 0.85in typical Magnet Type Rare earth Housing Material ABS plastic Color White Operating Temperature 32°F to 120°F
0°C to 49°C
Relative Humidity 5-95% non-condensing Battery (included) 2 Panasonic CR2032 or equivalent lithium batteries Regulatory Listings ETL, FCC part 15, Industry Canada Manufacturer Warranty 2 years
- 1x - Sensor
- 1x - Magnet
- 2x - CR2032 Battery
- 2x - Phillip's Flat-Head Screw
- 1x - Two-Pin Connector w/ 12" Flying 2-Wire Lead
- 1x - Adhesive Strip
- 1x - Instruction Manual
- 1x - Sensor