- Control outdoor lights or appliances, from any INSTEON controller
- Switches up to 1800 Watts
- Reliable operation in temperatures from -4° F to 122° F (-20° C to 50° C)
- NEMA 3R tested for protection against falling rain and ice formation
- Dual-band communication for the ultimate in reliability
This is an outdoor and dual-band version of the ApplianceLinc
, which makes remote on/off control of outdoor plug-in lights and appliances possible. Now you can control devices such as fountain pumps and landscape or holiday lighting. No hardwiring or complicated installation is necessary, just plug it in, plug in the device you want to control and link it to an INSTEON controller
- then just sit back and enjoy the benefits of automated lighting.
Scheduling your outdoor lights or appliances: Use the INSTEON Hub
on your computer to have your Outdoor Module, or any other INSTEON-compatible device, to turn on or off at any specific time or even at sunrise and sunset.
Please Note: The INSTEON On/Off Outdoor Module must be plugged into a GFCI outlet when used in outdoor applications.
INSTEON On/Off Outdoor Module
Easy To Install
The Outdoor Module is easy to install and set up. Add it to all of your outdoor appliances such as fountain pumps and landscape or holiday lighting, and then plug the module back into the wall outlet. Link the Outdoor Module to an INSTEON controller using the Plug & Tap programming method, and you'll be able to turn the appliance on and off from any linked INSTEON-compatible controller.
Learn more about INSTEON.
Create Multi-Way Circuits
Want to be able to synchronize a wall switch with your outdoor lighting so that when your indoor lights are controlled at the switch, your outdoor lights follows along? You can do it with INSTEON. Simply link your Outdoor Module with an INSTEON wall switch and in seconds you're done.
Scenes allow you to control multiple lights, rooms or even the whole home with a single command. Because the Outdoor Module can be a member of more than 400 scenes (i.e. "Movie Time," "Party," "Romance," etc.), you'll be able to launch various lighting scenarios with a single button press on an INSTEON controller. These are elegant features usually found only in systems costing tens of thousands of dollars and requiring extensive rewiring of your home. All member lights and appliances can turn on or off instantly, all controlled with one command from one button.
All settings are stored in non-volatile memory and are not lost during power failures. Additionally, in the event of a power loss, the On/Off Outdoor Module will return the appliance to its off state when power is restored.
Certifications and Warranty
All INSTEON products are safety approved. The factory for INSTEON products is ISO9001:2008 certified. In order to meet the ISO 9001:2008 standards, the entire factory underwent rigorous inspections of procedures and policies before being certified. The certification received was based on its dedication to high-quality management systems and strict adherence of quality control systems and guidelines. Because of this, INSTEON stands behind the entire product line with a full 2-year warranty.
|Product name:||INSTEON On/Off Outdoor Module|
|Brand/manufacturer: ||INSTEON |
|Manufacturer product no.: ||2634-222|
|Warranty ||2 years, limited|
|INSTEON: ||Responder and controller|
|Maximum links/scenes: ||400|
|Status LED: ||Green when load is on, red when load is off |
|Blinks green and red during setup |
|Blinks red or green (depending upon state of load) to indicate traffic (must be enabled via software) |
|Local control ||Yes |
|Commands supported as responder: ||On ||Off |
|Fast on ||Fast off |
|Commands supported as controller: ||On ||Off |
|Software configurable: ||Yes |
|RF range: ||Up to 150 feet open air|
|Phase detect beacon: ||Yes|
|X10 support: ||No|
|INSTEON device category: ||0x02 switched lighting control |
|INSTEON device subcategory: ||0x38|
|Status LED: ||Green and Red |
|Local control: ||Available (Tap Set button) |
|Load sensing: ||Available (Off by default) |
|Operation modes: ||INSTEON only |
|Combo mode message order: ||INSTEON broadcast, INSTEON cleanup |
|Setup memory: ||Non-volatile EEPROM |
|Case color: ||Black |
|Set button: ||Yes |
|Plastic: ||UV stabilized polycarbonate |
|Beeper: ||Yes |
|Beep on button press: ||Yes (off by default) |
|LED: ||1 red/green |
|Dimensions: ||2.75"W x 4.32"H x 1.27"D (with 6" lead) |
|Weight: ||.45lbs |
|Operating environment: ||Outdoors |
|Operating temperature range: || -4 to 122° F |
|Operating humidity range: ||Up to 85% relative humidity |
|Rainproof rated||NEMA Type 3R Enclosure|
|Voltage: ||120 Volts AC +/- 10% |
|Frequency:||60 Hertz, single phase|
|Power Plug:||3-pin grounded|
|Controlled Outlet:||3-pin grounded|
|Maximum Load:||15 Amps; 1800 Watts (for incandescent loads)|
|Power Consumption:||0.71 Watts|
|Certification:||Conforms to ANSI/UL Std. 508-2005|
Certified to CAN/CSA Std. C22.2 #14-05
NEMA Type 3R rated enclosure
|FCC ID: ||SBP26342 |
Customers Also Bought