Add $175.00 for FREE shipping

Automatically Turn Off The Lights When The Office Is Empty
Leviton ODS10-IDW Commercial Grade Wall Mounted Occupancy Sensor, White
Leviton ODS10-IDW Commercial Grade Wall Mounted Occupancy Sensor, White
Click for larger image and other views
Dimensions Diagram Field of PIR View Wiring Diagram
Leviton ODS10-IDW Commercial Grade Wall Mounted Occupancy Sensor, White
Item# 2520W
Free shipping on orders over $175 - See Details


  • Adjustable 10-20-30-minute duration
  • 180° 2,100 sq ft. coverage
  • Adjustable to turn on only when dark
  • Easy three-wire installation

Essential Info

Leviton ODS10-IDW Commerical Grade Wall Occupancy Sensor provides extended motion sensing range, longer time duration options, higher power handling, and the highest possible quality and reliability in a motion sensing light switch. This is a switch produced for the demanding requirements of offices and commercial buildings but can also be used in residential applications. The Occupancy Sensor will fit into any Decora Wall Plate (sold separately).


What's Included

  • One Leviton Commercial Grade Wall Mounted Occupancy Sensor - White
  • Mounting Screws
  • More Info

    Push-button Manual Override Control
    For manual control, the wall sensor features a convenient push-button switch. If the lights are OFF, pressing the button will turn lights ON and keep them ON for as long as the room is occupied. The lights will be turned OFF once the room is vacant, after the delayed-OFF time expires. If the lights are ON, pressing the button will turn lights OFF and keep them OFF even if the room is occupied.

    Field of View
    The wall sensor provides a 180° field of view with a maximum coverage area of approximately 2100 square feet. The maximum sensing distance in front of the sensor is 40 feet, and at each side is 30 feet. A "small-motion" zone detects relatively small body movements and allows the lights to stay ON even though a person may not be moving or walking around the room. The remainder of the field of view, the "large-motion" zone, exhibits a lesser degree of sensitivity and requires larger movements. Integral sliding blinders on each side of the lens may be used to restrict the 180° field of view down to 32°. This will prevent unwanted detection in areas such as hallways. Reducing the coverage range allows the unit to ignore motion at the far end of its range and avoid unnecessarily switching lights ON. The range can be adjusted from 100% to 36% of the total coverage area.

    Delayed timer
    A choice of four delayed-OFF time settings is available: 30-seconds (for walking test purposes only), 10 minutes, 20 minutes, and 30 minutes.

    Background Light
    To maximize energy savings in some installations, the ambient light override feature will prevent the wall sensor from switching lights ON when there is ample natural sunlight, regardless of occupancy. This adjustment should be made when the ambient light is at the level where no artificial light is needed. Adjustable Ambient Light Override ranges from approximately 2 foot-candles (2 lux) to 500+ foot-candles (500+ lux.). Wall plate sold separately. Also available in ivory.



    Manufacturer Product No.:ODS10-IDW
    Line Voltage:120/277 VAC
    Operational Frequencies:60Hz
    Wire Designation:Line-Black, Load -Blue, Ground-Green
    Load Rating:Fluorescent: 1200VA (10A) @ 120V; 2700VA (10A) @ 277V
    Incandescent:: 800W (6.67A) @ 120V
    Motor: 1/4 HP (5.8A) @ 120V
    Minimum Load Required:None
    Compatible Loads:Electronics Ballast, Magnetic Ballast, Electronics Low-Voltage Transformers, Magnetic Low-Voltage Transformers, Incandescent Lamps, Fans
    Operating Temperature Range:32 F to 122 F
    Relative Humidity:20% to 90% non-condensing
    Agency Approval:UL Listed, CSA Certified, Complies w/ California Title 24 Energy Code, Complies with FCC Regulations

    Important notes:
    Only merchandise credit for defective items returned within 30 days of purchase. No other returns allowed on this item.


    Dimensions Diagram  Field of PIR View  Wiring Diagram   
    Dimensions Diagram  Field of PIR View  Wiring Diagram   


    96 Ratings
    5 star: 77%  (74)
    4 star: 11%  (11)
    3 star: 4%  (4)
    2 star: 0%  (0)
    1 star: 7%  (7)
    Average Customer Rating
    (96 customer ratings)
    Share your thoughts with other customers
    JOERG -- martinez, CA   3/4/2012
    Works with fluorescent lights. Makes an audible clicking noise. Adjustable shades to limit field of view is a very useful feature. Range, background light and delay time can be adjusted separately from each other. The time delay control looks like a potentiometer, but has only four settings: 0.5, 10, 20 and 30 minutes (according to the manual), which are difficult to locate. Continuous adjustment would be desirable. The device also lacks an always-on override, e.g., by long-pressing the button and LED color change.
    RICHARD -- rossford, OH   3/1/2012
    Installed for two weeks now, they work great.
    DAROLD -- richland center, WI   11/14/2011
    Works perfect! Works just as I had planned and intended it to. Adds convenience and should save substantially on usage of electricity.
    Russ -- indianapolis, IN   8/21/2011
    I have gone through two of these powering about 8 CFL and now LED bulbs. The first one failed by staying on beyond the timeout, and wouldn't even respond to manually turning off, resulting in lights being on all night with no way to turn them off without removing completely needless to say a major PITA. The second one failed by failing to turn off when set to the standard 20 minute timeout works on 30 seconds, but stays on forever on 20 minutes. Returning both under warranty so we'll see if we get better results, but batting 0 for now.
    Barry -- las vegas, NEV.   8/5/2011
    This is a great switch that works with compact fluorescent lights CFL's which can be very difficult to find in, especially in your local home stores.I use this switch for a task light in my kitchen, and it works great when making a quick meal or late night snack. I only have one small complaint in that the ambiant sensor settings are not as sensitive as I would like, because even with the sensor at it's lowest possible level it still allows the motion sensor to activate the lights even with an good amount of sunlight in the room. I would prefer it to only activate in little or no available light.This technology has come far, but still has a ways to go before it is perfected.
    JOHNIE -- kingsbug, CA   6/30/2011
    Great product. Easy to install and operate.
    BARBARA -- selma, CA   2/11/2011
    Fast delivery, easy to install and works perfectly.
    FRANK -- sunrise, FL   12/3/2010
    The commercial grade allows for use with all florescent ballasts without any flickering. Always buy the commercial ones when using with florescent lighting. Worth every penny. I have seem these things work for 20+ years in a commercial setting
    JACK -- langston, AL   10/13/2010
    easy to install and works great
    THOMAS -- leesburg, FL   8/16/2010
    Excellent product - solved our problems with lights being left on in our church restrooms.
    THOMAS -- leesburg, FL   7/31/2010
    This switch solved a problem with lights being left on in our church bathrooms. It was easy to install and works great. Thanks
    ED -- kansas city, MO   6/26/2010
    The product works perfectly. I am please with all aspect of the order and your co.s help in getting the right product. 5 Star for sure.
    ARMANDO -- american canyon, CA   6/18/2010
    A great item that does just what it should!. It was east to install and works great.
    MIKE -- valencia, CA   5/23/2010
    Works great with the heavy load of lighting and a bathroom exhaust fan. Easy to install.
    BENJAMIN -- danbury, CT   5/12/2010
    They seem to work pretty well; but the blinders don't have the advertised range; seem to only remove about 20 degrees of vision instead of the 90 advertised. Also wish you could set delay for 2 minutes or 5 minutes instead of being stuck with 10.
    ROBERT -- webster, NY   4/7/2010
    Works very well.
    DONALD -- charlotte, NC   3/29/2010
    This is an excellant product that is well worth the cost
    BRYAN -- chandler, AZ   3/23/2010
    Makes a clicking noise when it turns on, but other than that I love it. Works with florescent lights.
    JOHN -- mesquite, NV   2/20/2010
    Works perfectly.
    LANCE -- monticello, KY   1/7/2010
    This sensor does what it says. Well worth the money. It works great with electronic ballasts. I use this this sensor to light up garage with 440watts of flourescent light!


    Wall Plates       
    Wall Plates       

    Related Items

    Sign-up for Exclusive Email offers 
    How to Order Track Your Package Shipping Returns Contact Us Customer Service Retail Store
    Getting Started Learning Center FAQ Dealers Customer Testimonials Affiliate Program
    About Us INSTEON Press Awards Employment Guarantees Security & Privacy
    Free Catalog Email Newsletter Forum RSS Site Map
    Have questions? Call us at 800-762-7846 (Mon-Fri 5am-7pm and Sat 6am-3pm PT) or send us a message
    Place your order by 3pm PT for same day shipping
    Copyright 1995-2014 SMARTHOME™
    Verisign Secure Site PayPal Acceptance Mark