|
Find Similar Products in:
|
|
|
| SwitchLinc 3-Way Dimmer - INSTEON 3-Way Dimmer Kit |
|
|
| Item# 2494M3 |
|
|
|
|
|
|
Overview
|
Essential Info
Manuals/Software
What's Included
2 pre-configured SwitchLinc Dimmers
Quick-Start Guide
4 mounting screws
6 wire nuts
2 white paddles
|
More Info
|
Remote-ControllableOne of the advantages of having INSTEON SwitchLinc Dimmers is that you can link other INSTEON devices to control the wall switch dimmers remotely. How many times have you jumped into bed and forgotten to turn the hallway lights off? You now have the convenience of linking a bedside controller to turn off your hallway light after you get into bed. If you would like to create a whole-home lighting automation system, try the INSTEON Wire-in Dimmer Scene Lighting Starter Kit, which includes everything required to set up your INSTEON network, including two SwitchLinc Dimmers, a pair of INSTEON SignaLinc RF Signal Extenders to ensure INSTEON network reliability, and a desktop controller. Learn more about INSTEON here.
New! Etched Labeling Now Available
Lighting TypesThe dimmers are rated for up to 600 watts. If a larger load is needed, a INSTEON SwitchLinc Dimmer (High Wattage) is available. If you have multiple dimmers in the same wall box, the 1000-watt unit may help with keeping the required minimum wattage rating. For info about de-rating, see the spec chart below for the heading: "Mounting." This dimmer switch can control incandescent bulbs, low-voltage halogen (e.g. track), and other low-voltage lights with magnetic or dimmable electronic transformers. If you need to control a fluorescent light fixture or a non-dimmable appliance, try the INSTEON SwitchLinc Relay (Non-Dimming) instead.
Network ReliabilityTo ensure network reliability 2 INSTEON Access Points are suggested in each home with INSTEON-compatible products. While a single Access Point will bridge INSTEON signals between radio frequency and powerline signals, two properly installed Access Points will also act as powerline signal repeaters, maximizing the reliability of your INSTEON network.
Certifications and WarrantyAll INSTEON SwitchLinc products are safety approved. The factory for SmartLabs Design Products is ISO9001 certified. In order to meet the ISO 9001 standards, the entire factory underwent rigorous inspections of procedures and policies before being certified. The certification received was based on its dedication to high-quality management systems and strict adherence of quality control systems and guidelines. Because of this, SmartLabs stands behind the entire INSTEON SwitchLinc line of products with a full 2-year warranty.
SwitchLinc DimmerFor more detailed information about the functionality of the dimmer, see the SwitchLinc main page.
|
Specifications
|
Specifications | | General | | Brand: | Smarthome | | Manufacturer: | SmartLabs Design | | Manufacturer Product No.: | 2494m3, INSTEON SwitchLinc 3-Way Dimmer Kit | | UPC: | 689076404440 | | Patent No.: | U.S. Patent No. 7,345,998, International patents pending | | Warranty: | 2 years, limited (Upgradeable to 7 years) | | Operation | | On-Levels: | 32 locally, increments of 1% with software | | Ramp Rates (full-ON to full-OFF): | 0.1 to 9 seconds if programmed locally, 0.1 seconds to 9 minutes if programmed remotely | | LED Bar Brightness Indicator: | 9 White LEDs, Optional Green, Blue, Amber, or Red with #2400L kit | | Manual Operation Modes: | INSTEON only, X10 only, INSTEON and X10 Combo Mode | | Combo Mode Message Order: | INSTEON, X10, INSTEON cleanup | | Multi-Way Circuit Support: | One SwitchLinc Dimmer controls load, Cross-Link any number of SwitchLinc Dimmers or other INSTEON Controllers | | Setup Memory: | Non-volatile EEPROM | | INSTEON Features | | INSTEON Addresses: | 1 hard-coded out of 16,777,216 possible | | INSTEON Links: | 417 out of 16,777,216 possible | | INSTEON Powerline Frequency: | 131.65 KHz | | INSTEON Minimum Transmit Level: | 3.2 Vpp into 5 Ohms | | INSTEON Minimum Receive Level: | 1 mVpp nominal | | INSTEON Messages Repeated: | Yes | | Mechanical | | Paddle Type: | True rocker action | | Paddle and Trim Frame Color: | White installed; Optional Ivory, Almond, Black, Brown, or Gray with #2400xx kits | | Wire Nuts: | 5 included | | Mounting: | Mounts in single or multiple-ganged junction box. Control 200 W less load for each immediately adjacent SwitchLinc Dimmer installed. For example, 600 W load control becomes 400 W with another dimmer to the immediate right or left. Use a triple-gang box with a mechanical switch in the center to avoid de-rating. | | Operating Conditions: | Indoors, 40 to 104°F, up to 85% relative humidity | | Dimensions: | 4.1" H x 1.8" W x 1.2" D | | Weight: | 3.6 oz | | Electrical | | Supply Voltage: | 120 Volts AC +/- 10%, 60 Hertz, single phase | | Surge Protection: | MOV rated for 150 Volts | | Power Wire Leads: | 6", 16 AWG, stranded,600V, 105°C insulation, ends stripped and tinned, LINE (black), LOAD (red), NEUTRAL (white) | | Ground Lead: | 6", 18 AWG, stranded, bare copper | | Load Types: | Wired-in incandescent lighting devices | | Maximum Load: | 600 Watts (uses 12-Amp triac dimmer) | | Minimum Load: | No minimum load required |
| Certification: | Safety tested for use in USA and Canada (ETL #3017581) | | X10 Features | | X10 Primary Address: | 1 optional (comes unassigned) | | X10 Scene Addresses: | 255 possible | | X10 Status Response: | Supported | | X10 Resume Dim: | Supported (by setting Local On-Level to zero) | | X10 Powerline Frequency: | 120 KHz | | X10 Minimum Transmit Level: | 3.2 Vpp into 5 Ohms | | X10 Minimum Receive Level: | 10 mVpp nominal | | X10 Messages Repeated: | No |
|
Images/Video
|
|
|
Reviews
|
|
|
Accessories
|
|
|
Related Items
|
Customers Also Bought
|
|
|
|
|