|
Find Similar Products in:
|
|
|
| Kitchen Scene Lighting Kit - INSTEON Lighting Starter Kit |
|
|
| Item# 2493K |
|
|
|
|
|
|
Overview
|
- Turn on kitchen and dining area lights with one button press according to your desired activity
- One-button scenes save energy by automatically turning off unneeded lights
- Installation and programming can be completed in minutes
- Expandable system can allow for whole-house lighting control from any room
Essential Info
Manuals/Software
What's Included
|
More Info
|
By setting up lighting scenes, you'll not only have one-button access to appropriate lighting for each daily activity, you'll also be saving energy by turning lights off automatically when they're not in use. The INSTEON Kitchen Lighting Starter Kit will control up to five lights or sets of lights in your kitchen and dining areas from a single wall-mounted keypad. Best of all, everything you need to set up and control these lights is contained in a single easy-to-install kit that programs in minutes.
Easy Setup and ProgrammingThe INSTEON Kitchen Lighting Starter Kit comes with two dimmers, a light switch, a plug-in module, and a wall-mounted keypad to control them all, as well as a pair of signal enhancers to ensure network reliability. INSTEON-compatible dimmers, switches, and keypads simply replace your existing light switches; no new wiring is required.
Install the keypad in a central location to the lights you'll be controlling. Its main button will control the light or lights your existing switch controls. The dimmers can replace light switches that control any incandescent lighting; use the on/off switch to replace a switch controlling fluorescent kitchen lights or any other non-dimmable load. A plug-in module is included in this kit for hard-to-reach lights, such as under-cabinet lighting or a remote lamp. Linking all of these lights to the keypad is done with the press of a button and can be completed in minutes!
Setting Up Lighting ScenesThe keypad will let you set up four separate lighting scenes in addition to turning its controlled light on and off and dimming it. Linking is as easy as setting the scene button into linking mode by pressing it and holding it and then pressing the ON button on a light to be controlled. Follow this guide or create your own!
Scene 1: Cooking
Set up your cooking scene so that with the press of a button, your kitchen lights will come on to full brightness. Under-cabinet lighting can turn on in this scene, as well, since you'll need to have a clear view of the veggies you're chopping and the spices you're adding to each dish. Dining area lights can remain unlit.
Scene 2: Dinner Time
Ready to serve? Tap the keypad button labeled "Dinner Time," and your dining area lights will ramp on slowly to your desired brightness level. Under-cabinet lighting can turn off, since it won't be needed during the meal, and kitchen lights can either turn off entirely or dim to 50 percent if you'll be going back for different courses or condiments.
Scene 3: Romantic
Will it just be the two of you tonight? Skip the "Dinner Time" scene and tap "Romantic" instead. This lighting scene will dim all lights in the area to 50 percent for instant mood lighting and a meal with ambience.
Scene 4: Homework
The dishes are done, the leftovers are in the fridge, and the grownups are heading to the den for some relaxing couch time, but the kids will be at the kitchen table for the next couple of hours, working on their homework. It's time for the "Homework" scene: Press this button to turn off the kitchen lights, the under-cabinet lighting, and the dining room light, and this scene will also trigger the bright light over the kitchen table to come on to full strength so that the kids can see what they're reading.
Labeling Keypad Scene ButtonsYou can keep track of the different scenes easily by labeling the buttons with the included pre-printed labels or by ordering custom laser-etched keypad buttons (available for 6-button KeypadLincs and 8-button KeypadLincs).
Additional KeypadLinc BenefitsThis lighting control kit provides tremendous flexibility. Other wall-mounted keypads only provide on/off control, each KeypadLinc button can perform up to four different functions. Press a button once for ON; press again for OFF. Press and hold to brighten, press and hold again to dim. If you prefer, turn off the toggle feature to send the same command every time. This is a helpful feature when programming an "all on" command button to press when you get home or "all off" command button to press when you leave for the day. The buttons on the INSTEON KeypadLinc Dimmer illuminate when ON signals are sent, allowing the keypad to monitor lights in other rooms.
Expanding Your Lighting ControlOnce you've started controlling these lights with a single button press, you'll likely find you want to expand your network to turn other lights on and off remotely. Luckily, your INSTEON network can grow to include an unlimited number of lights and controllers. Add more dimmers and relay switches, plug-in lamp dimmers and control them with as many wall-mounted keypads or tabletop controllers as you like.
|
Specifications
|
Specifications | | Brand: | Smarthome | | Manufacturer: | SmartLabs Design | | Manufacturer Product No.: | 2493K, INSTEON Kitchen Lighting Starter Kit | | Patent No.: | U.S. Patent No. 7,345,998, International patents pending | | Warranty: | 2 years, limited |
Keypad Specifications | | Brand: | Smarthome | | Manufacturer: | SmartLabs Design | | Manufacturer Product No.: | 2486D | | UPC: | 891114000204 | | Patent No.: | U.S. Patent No. 7,345,998, International patents pending | | Color: | Button trim frame: White (Ivory trim frame included)
Load status indicator: white
Button status indicators: 8 white LEDs, other colors available soon | | Voltage & Frequency: | 120VAC, 60Hz | | PLC Levels: | Minimum transmit level: 2V
Maximum receive level: 10mV
Maximum signal rejection: 200mV | | Weight: | .55 lbs. (0.136kg) | | Dimensions: | 4.14" H (10.516cm) x 1.73" W (4.394cm) x 1.68" D (4.267cm) (front bracket); 2.76" H (7.01cm) x 1.73" W (4.394cm) x 1.40" D (3.556cm) (main body) | | Maximum Load: | 600 Watts | | Minimum Load: | No minimum load required | | Circuit Types: | Single pole / 3-, 4- and 5-way ready | | Operating Temperature: | 32°F to 108°F | | Neutral Connection: | Required | | Controllable Device Types: | Incandescent, low voltage lighting, floodlights, energy saving bulbs, ceiling fan (may hum) | | Warranty: | 2 years, limited | | General Operations | | Status indicator: | White LEDs (optional Green, Blue, Red, Amber with kit (coming in October) | | Manual Operations: | INSTEON only, X10 only, INSTEON and X10 (Combo Mode) | | 3/4/5-way operation: | Single pole, 3, 4 and 5-way ready. Use additional KeypadLincs or SwitchLinc Relays (or dimmers) in slave locations. No traveler wire(s) required. | | On Level(s) | 1, 100% - 32 on levels | | Ramp Rates | 1, Instant - 32 ramp rates | | INSTEON Features | | INSTEON Address: | 1 Hard coded out of 16.7 million possible | | INSTEON Scenes: | Can be a member of 417 Insteon scenes | | Repeats All INSTEON Signals: | Yes | | X10 Features | | X10 Primary Address: | 1 Optional (comes unassigned), any of 256 possible | | X10 Scenes: | 256 | | Status Response (X10 2-Way) | Yes |
Access Point Specifications | | Brand: | Smarthome | | Manufacturer: | SmartLabs Design | | Manufacturer Product No.: | 2443, INSTEON Access Point & Wireless Phase Coupler | | UPC: | 689076406840 | | Patent No.: | U.S. Patent No. 7,345,998, International patents pending | | Dimensions: | 3 7/8" x 1 1/2" x 2 7/16" | | Frequency: | 915 MHz | | RF Range: | 200 feet, line of sight | | Status LED: | Yes | | Certification: | Safety tested for use in USA and Canada (ETL #3017581) | | FCC ID: | SBP2443 | | Warranty: | 2 years, limited |
Dimmer Switch Specifications | | Brand: | Smarthome | | Manufacturer: | SmartLabs Design | | Manufacturer Product No.: | 2476D | | UPC: | 891114000082 | | Patent No.: | U.S. Patent No. 7,345,998, International patents pending | | Color: | White | | Voltage & Frequency: | 120VAC, 60Hz | | Dimensions: | 1.78" W x 4.13" H x 1.05" D (front bracket)
1.77" W x 2.68" H x .95" D (main body) | | Maximum Load: | 600 watts (see manual for multi-gang ratings) | | Minimum Load: | No minimum load required | | Circuit Types: | Single pole / 3, 4 and 5-way ready | | Operating Temperature: | 40°F to 104°F | | Neutral Connection: | Required | | Compatible Load Types: | Incandescent, low voltage lighting, floodlights, energy saving bulbs, ceiling fan (may hum) | | Controllable Device Types: | Incandescent and inductive loads | | Warranty: | 2 years, limited |
On/Off Switch Specifications | | General | | Brand: | Smarthome | | Manufacturer: | SmartLabs Design | | Manufacturer Product No.: | 2476S, INSTEON SwitchLinc V2 Relay Switch | | Patent No.: | U.S. Patent No. 7,345,998, International patents pending | | Warranty: | 2 years, limited (Upgradeable to 7 years) | | Operation | | LED Bar Brightness Indicator: | 8 White LEDs, Optional Green, Blue, Amber, or Red with #2401L kit | | Manual Operation Modes: | INSTEON only, X10 only, INSTEON and X10 Combo Mode | | Combo Mode Message Order: | INSTEON, X10, INSTEON cleanup | | Multi-Way Circuit Support: | One SwitchLinc Dimmer controls load, Cross-Link any number of SwitchLinc Relays or other INSTEON Controllers | | Setup Memory: | Non-volatile EEPROM | | INSTEON Features | | INSTEON Addresses: | 1 hard-coded out of 16,777,216 possible | | INSTEON Links: | 417 out of 16,777,216 possible | | INSTEON Powerline Frequency: | 131.65 KHz | | INSTEON Minimum Transmit Level: | 3.2 Vpp into 5 Ohms | | INSTEON Minimum Receive Level: | 1 mVpp nominal | | INSTEON Messages Repeated: | Yes | | Mechanical | | Paddle Type: | True rocker action | | Paddle and Trim Frame Color: | White installed;Optional Ivory, Almond, Black, Brown, or Gray with #2400xx kits | | Wire Nuts: | 3 included | | Mounting: | Mounts in single or multiple-ganged junction box. | | Operating Conditions: | Indoors, 40 to 104°F, up to 85% relative humidity | | Dimensions: | 4.1" H x 1.8" W x 1.2" D | | Weight: | 3.6 oz | | Electrical | | Supply Voltage: | 120 Volts AC +/- 10%, 60 Hertz, single phase | | Surge Protection: | MOV rated for 150 Volts | | Power Wire Leads: | 6", 16 AWG, stranded, 600V, 105°C insulation, ends stripped and tinned, LINE (black), LOAD (red), NEUTRAL (white) | | Ground Lead: | 6", 18 AWG, stranded, bare copper | | Load Types: | Wired-in incandescent lighting and inductive loads | | Maximum Load: | 480 Watts incandescent, 13A resistive | | Minimum Load: | No minimum load required | | Certification: | Safety tested for use in USA and Canada (ETL #3017581) | | X10 Features | | X10 Primary Address: | 1 optional (comes unassigned) | | X10 Scene Addresses: | 255 possible | | X10 Status Response: | Supported | | X10 Resume Dim: | Supported (by setting Local On-Level to zero) | | X10 Powerline Frequency: | 120 KHz | | X10 Minimum Transmit Level: | 3.2 Vpp into 5 Ohms | | X10 Minimum Receive Level: | 10 mVpp nominal | | X10 Messages Repeated: | No |
Lamp Module Specifications | | General | | Brand: | Smarthome | | Manufacturer: | SmartLabs Design | | Manufacturer Product No.: | 2456D3, INSTEON LampLinc V2 Lamp Dimmer, 3-prong | | Patent No.: | U.S. Patent No. 7,345,998, International patents pending | | Warranty: | 2 years, limited | | Operation | | Status LED: | White | | On-Levels: | 32 | | Ramp Rate (full-ON to full-OFF): | 0.125 to 9 seconds if programmed locally, 0.125 seconds to 9 minutes if programmed remotely | | Local Control: | Load sensing (can be disabled) | | Setup Memory: | Non-volatile EEPROM | | INSTEON Features | | INSTEON Addresses: | 1 hard-coded out of 16,777,216 possible | | INSTEON Links: | 417 out of 16,777,216 possible | | INSTEON Powerline Frequency: | 131.65 KHz | | INSTEON Minimum Transmit Level: | 3.2 Vpp into 5 Ohms | | INSTEON Minimum Receive Level: | 1 mVpp nominal | | INSTEON Messages Repeated: | Yes | | Mechanical | | Operating Conditions: | Indoors, 32 to 122°F, up to 85% relative humidity | | Dimensions: | 4.0" H x 2.5" W x 1.5" D | | Weight: | 5 oz | | Electrical | | Supply Voltage: | 120 Volts AC +/- 10%, 60 Hertz, single phase | | Surge Protection: | MOV rated for 150 Volts | | Power Plug: | 3-pin grounded | | Pass-through Outlet: | 3-pin grounded | | Controlled Outlet: | 3-pin grounded | | Load Types: | Plug-in incandescent lighting devices | | Maximum Load: | 300 Watts | | Minimum Load: | 25 watts (for Local Control load sensing) | | Certification: | Safety tested for use in USA and Canada (ETL #3017581) | | X10 Features | | X10 Primary Address: | 1 optional (comes unassigned) | | X10 Scene Addresses: | 255 possible | | X10 Status Response: | Supported | | X10 Resume Dim: | Supported (by setting X10 Primary Address On-Level to zero) | | X10 Powerline Frequency: | 120 KHz | | X10 Minimum Transmit Level: | 3.2 Vpp into 5 Ohms | | X10 Minimum Receive Level: | 10 mVpp nominal | | X10 Messages Repeated: | No |
|
Reviews
|
|
|
Accessories
|
|
|
Related Items
|
Customers Also Bought
|
|
|
|
|