Overview
|
- INSTEON compatibility for outstanding performance
- Convenient lighting and appliance remote control from anywhere in the house
Essential Info
Manuals/Software
What's Included
Tabletop Controller
2 Access Points
2 LampLinc Dimmers
Quick start guide
|
More Info
|
This starter kit includes two INSTEON Access Points (& Wireless Phase Couplers), the most important part of the INSTEON network. Installing two Access Points creates your INSTEON network, and adding additional Access Points will improve INSTEON signal strength and network coverage throughout your home.
The INSTEON ControLinc Tabletop Controller can be set up in less than 5 minutes to control the two included INSTEON LampLinc Dimmers remotely using a simple "Plug and Tap" setup process. Additional LampLincs can be purchased separately to create more advanced lighting scenes. Each of the five ON/OFF buttons on the ControLinc can be set up to control one lamp or every lamp in the home remotely to create dramatic lighting scenes. Additional ControLincs can be purchased separately to add remote control to other rooms. As an example, adding a ControLinc on your bedside table would allow the remote control of downstairs lamps in the middle of the night if you hear a noise.
The INSTEON LampLinc Dimmers are full-featured dimmers and can control any incandescent lamps up to 300 watts.
The ControLinc and LampLinc also work with legacy X10 products. The LampLinc and any of the 5 ON/OFF buttons on the ControLinc can be given an X10 address, providing a bridge between an existing X10 network and your new INSTEON network.
|
Specifications
|
Specifications | | Brand: | Smarthome | | Manufacturer: | SmartLabs Design | | Manufacturer Product No.: | 2490 INSTEON Lamp Scene Lighting Starter Kit | | UPC: | 891114000167 | | Warranty: | 2 years, limited |
Specifications | | Brand: | Smarthome | | Manufacturer: | SmartLabs Design | | Manufacturer Product No.: | 2430 INSTEON ControLinc Tabletop Controller | | Dimensions: | 6.4" x 5" x 3" | | X10 Addresses: | Up to 5 programmable (comes unassigned); any of 256 possible | | Button Modes: | INSTEON only, X10 only, INSTEON and X10 together | | INSTEON Scenes: | 417 | | ALL ON/ ALL OFF Buttons: | Controls all INSTEON & X10 devices programmed in channels 1-5 | | Bright/Dim: | Controls last pressed channel (INSTEON and X10 if programmed) | | Status LED: | Yes (white, can be disabled) | | Sounding Device: | Internal beeper (can be disabled) | | Mounting: | Included desk stand | | AC Cord: | Standard 2-pin polarized | | Warranty: | 2 years, limited |
Specifications | | Brand: | Smarthome | | Manufacturer: | SmartLabs Design | | Manufacturer Product No.: | 2442 SignaLinc Signal Enhancer | | Dimensions: | 4" x 2.5" x 1.25" | | Frequency (RF): | 915 MHz | | RF Range: | 150 feet, line of sight | | FCC ID: | SBP2442 | | Status LED: | Yes (white) | | Pass-Through Outlet: | 3-pin, rated for up to 15 amps | | Outlet # Pins: | 3 | | Warranty: | 2 years, limited |
Specifications | | Brand: | Smarthome | | Manufacturer: | SmartLabs Design | | Manufacturer Product No.: | 2456D3 INSTEON LampLinc Lamp Dimmer | | Dimensions: | 4" x 2.5" x 1.25" | | Maximum Wattage | 300 watts | | Adj. On Level | Yes | | Adj. Ramp Rate: | Yes | | INSTEON Scenes: | 417 | | Status Response (2-Way): | Yes | | Load Monitor: | Yes | | Preset Dim: | Yes | | Fade On & Off: | Yes | | X10 Primary Address: | 1 optional (comes unassigned); any of 256 possible | | X10 Scenes: | 255 | | Status LED: | Yes (white) | | Pass-Through Outlet: | Yes, rated for up to 15 amps | | Outlet Pins: | 3-pin | | Warranty: | 2 years, limited |
|
Images/Video
|
|
|
Reviews
|
|
|
Accessories
|
|
|
Related Items
|
Customers Also Bought
|
|
View Cart 
