Click for larger image and other views
- Three products in one: In-wall controller, 20-amp On/Off switch and Access Point
- Monitor and control five different devices or sets of devices
- Create whole-house lighting scenes in minutes
- Visually displays the status of any linked device with the built-in LEDs
- Featuring dual-band INSTEON technology for the fastest and most reliable performance
This keypad is an elegant in-wall scene controller plus heavy-duty 20-amp switch all in one. Simply install the keypad in place of a standard wall switch and the on and off buttons control whatever the previous switch controlled (light/appliance), while the four scene buttons can be programmed to control any number of INSTEON devices such as dimmers
, A/V gear
. Furthermore, KeypadLinc can itself be a member of countless scenes. This gives you remote control of both the connected light or appliance as well as any of the the scene button LEDs. This newest member of the KeypadLinc family supports voltages from 120 to 277V, making it the perfect energy saving, wireless controller for residential and commercial building automation systems.
Need to control more lights from this location? You can easily change this 6-button KeypadLinc to an 8-button keypad using the White 8 Button Change Kit for KeypadLinc
. You can also change colors to match your décor using these kits which are available in Ivory
, Light Almond
, and Gray
. Software configurable
Using INSTEON software such as HouseLinc
, you can control, program and manage settings for this and other other INSTEON devices in your home. You can even schedule timed events, receive email alerts when devices are activated and more. Learn more about HouseLinc.
KeypadLinc - INSTEON 6-Button Scene Control Keypad with On/Off Switch (Dual-Band), White
4 wire nuts
2 mounting screws
Wall plate sold separately
Easy To Install
INSTEON 6 Button Keypad Controller with On/Off Switch is easy to install and set up and yet so affordable, you'll be able to replace many of your switches with KeypadLinc. Just remove the old switch, reattach the line, load, and ground wires with the addition of the neutral wire using the included wire nuts, and you're done.
Scenes allow you to control multiple lights with one button. You can save and control up to five different individual lights, multi-light scenes, or even your whole home. Because KeypadLinc can be a member of more than 400 scenes (i.e. "Movie Time," "Party," "Romance," etc.), you'll be able to launch various lighting scenarios with a press of one of the keypad buttons. These are elegant features usually found only in systems costing tens of thousands of dollars and requiring extensive rewiring of your home. All remotely controlled lights can ramp to your independently desired brightness levels at your chosen ramp rates, so one set of lights can dim slowly while another set turns off instantly, all controlled with one command from one button.
Monitor Other Devices
The buttons on INSTEON 6 Button Keypad Controller with On/Off Switch illuminate when ON signals are sent and when signals are detected from other INSTEON devices linked to KeypadLinc. This allows the KeypadLinc to monitor lights in other rooms, which is incredibly useful if you want to control lights that aren't easily seen from the location, like those in bedrooms, bathrooms, basements, garages, attics, etc.
The KeypadLinc gives you tremendous flexibility with controlling your lighting system. Other wall-mounted keypads only provide on/off control of all devices, however; KeypadLinc button can perform up to four different functions. Press a button once for ON; press again for OFF. Press and hold to brighten, press and hold again to dim. If you prefer, turn off the toggle feature to send the same command every time. This is a helpful feature when programming an "all on" command button to press when you get home or "all off" command button to press when you leave for the day.
Create Multi-Way Circuits
KeypadLinc allows you to customize your lighting setup no matter how your house is wired. It's simple to create a 3-, 4-, or 5-way circuit. First replace all of the existing switches you want to include in the circuit with either a KeypadLinc, INSTEON SwitchLinc Dimmer, or a INSTEON SwitchLinc Relay (Non-Dimmable). The main controller must be connected to the standard wires, load, line, neutral, and ground. The secondary switches only need to be connected to line, neutral, and ground. No traveler wires are needed, so it is easy to place one of the switches wherever you need it. Cross-linking all of the companion switches to the master switch is the last step in the process.
Commercial Applications for INSTEON
The KeypadLinc features dual-voltage support which allows it to be used in residential (120V) or commercial (277V) applications. Now you can bring the power of lighting control and automation into your business. Smarthome has been using these keypads to manage lighting in its 60,000 sq. ft. facility using HouseLinc.
This keypad is fully INSTEON-compatible and X10 ready. Homeowners with existing X10 networks can easily migrate to an INSTEON network without having to discard all their existing X10 devices. The KeypadLinc can respond to X10 commands from an X10 controller, and it can send X10 commands to X10 devices. Please note that INSTEON devices repeat INSTEON signals but not X10.
The keypad is dual band so it has the ability to communicate using both the electrical wires in the home (powerline) as well as using radio frequency (RF). This increases reliability not only for the keypad but for all devices on an INSTEON home control network (similar to the function of an Access Point).
The new KeypadLinc dual-band requires about a quarter-inch more depth than previous versions of KeypadLinc. Also, with the extra depth, the dual-band KeypadLinc will not fit inside the tabletop enclosure.
All KeypadLinc settings are stored in non-volatile memory and are not lost during power failures. Additionally, in the event of a power loss, the KeypadLinc will return to its last on/off state when power is restored.
Certifications and Warranty
All KeypadLinc products are safety approved. The factory for SmartLabs Design Products is ISO9001 certified. In order to meet the ISO 9001.pdf standards, the entire factory underwent rigorous inspections of procedures and policies before being certified. The certification received was based on its dedication to high-quality management systems and strict adherence of quality control systems and guidelines. Because of this, Smarthome stands behind the entire KeypadLinc line of products with a full 2-year warranty.
|Customizing Your KeypadLinc Buttons|
Popular Pre-printed Buttons
We have compiled data on our most commonly requested custom etched buttons (below) and put together two affordable, convenient multi-packs. The 25-pack features the most popular rooms and devices requested by customers, while the 50-pack includes the same as the 25-pack but with an additonal 20 names and 5 duplicate named buttons for those more common rooms/devices in the home. Give your KeypadLinc the ultimate in custom personalization, without the custom price tag! Available in White.
Popular 25-Button Set for KeypadLinc, White
Popular 50-Button Set for KeypadLinc, White
Custom Laser-Etched Buttons
KeypadLinc comes with a standard set of buttons; however they won't tell you what lights, appliances or scenes they control. Custom etched buttons are available that take the guesswork out of using your KeypadLinc by indicating the exact function of each button. 6-button or 8-button configurations are hand printed to your desired text, putting you in control. For the ultimate appearance and ease of use, custom etched buttons will provide a professional finish to any home installation. Available in White, Black, Almond, Light Almond, Ivory, Gray and Brown.
Clear KeypadLinc Buttons
Replace the included opaque buttons with clear buttons, which allow you to print your own labels for easily identifying lights and scenes. This complete set of clear buttons includes two large and eight small buttons, so you'll have enough to personalize your KeypadLinc whether you have a 6-button or 8-button configuration.
6 or 8-Button Change Kit for KeypadLinc, Clear
Blank KeypadLinc Buttons
This Blank 10-Button Set is great way to replace the standard buttons with blank buttons that offer a clean look and finish. These blank buttons can also be used to indicate an unused button or as a placeholder for a future INSTEON application. Only available in White.
Blank 10-Button Set for KeypadLinc, White
LED Color Change Kit
Don't want White LED backlights? Perhaps you want to make a red backlight for the button that controls your security lights. Or maybe you just want to match a particular style of the room. This kit comes with colored diffusers that allow you to change the color to Red, Green, Amber, or Blue. Each kit includes diffusers to change the colors of up to four KeypadLincs - one in each color.
LED Color Change Kit for KeypadLinc, 4-Color
|Manufacturer Product No.:||2487S, KeypadLinc - INSTEON 6 Button Keypad Controller with On / Off Switch (Dual-Band), White|
|Patent No.:||U.S. Patent No. 7,345,998, International patents pending|
|Warranty:||2 years, limited|
|LED Indicator||One per button; LED reflects status of button or remote device(s)|
|Operation Modes||INSTEON only, X10 only, INSTEON and X10 Combo Mode|
|Combo Mode Message Order||INSTEON, INSTEON cleanup, X10|
|Multi-Way Circuit Support||One INSTEON 6 Button Keypad Controller with On/Off Switch controls load, Cross-Link any number of Keypad INSTEON device or other INSTEON Controllers|
|ON/OFF Button Pairs||1 Pair (6 button only)|
|Setup Memory||Non-volatile EEPROM|
|Audio Alert ||Beeper, can be disabled |
|Max. # of Scene Memberships||8|
|Max. # of Controlled Scenes||8|
|INSTEON Powerline Frequency||131.65 KHz|
|INSTEON Minimum Transmit Level||3.2 Vpp into 5 Ohms|
|INSTEON Minimum Receive Level||10 mV|
|INSTEON Messages Repeated||Yes|
|Radio Frequency||915 MHz|
|Button Type||6 mechanical momentary contact type buttons|
|Button Appearance||Solid white pre-printed plastic caps, with LED backlighting|
|Wire Nuts||4 included|
|Operating Conditions||Indoors, 32 to 104° F, up to 85% relative humidity|
|Dimensions||4.2" H x 1.8" W x 1.7" D|
|Supply Voltage||120 - 277 Volts AC, 60 Hertz, single phase|
|Power Wire Leads||6", 12 AWG (LINE and LOAD) & 18 AWG (NEUTRAL), stranded, 600V, 105° C insulation, ends stripped and tinned, LINE (black), LOAD (red), NEUTRAL (white)|
|Ground Lead||6", 12 AWG, stranded, bare copper|
|Load Types||Wired-in incandescent lighting and inductive loads|
|Maximum Load||20 Amps;1800 Watts (for incandescent loads) |
|Power Consumption:||<1 Watt|
|Certification||FCC, IC Canada, ETL|
|X10 Features (applies to power line only)|
|X10 Primary Address||1 optional (comes unassigned)|
|X10 Scene Addresses||255 possible|
|X10 Controllable Addresses||5 X10 address (one per button sent when pressed)|
|X10 Status Response||Supported|
|X10 Powerline Frequency||121 KHz|
|X10 Minimum Transmit Level||3.2 Vpp into 5 Ohms|
|X10 Minimum Receive Level||20 mVpp nominal|
|X10 Messages Repeated||No|
Customers Also Bought