Add $175.00 for FREE shipping
View All New Products!
Load Type
Appliance
Compact Fluorescent
Electronic Low Voltage
Fans / Motors
Fluorescent Load
Incandescent / Halogen
Magnetic Low Voltage
Compatibility
INSTEON
X10 Compatible
Features
2-Way Communication
240V Capable
Dual-Band
LED Feedback
Multi-Way Ready
Scene Capability
Maximum Load
30 Amps
Normal State
Normally Closed
Voltage
220V AC
240V AC
Ease of Installation
Intermediate (Installs < 60 minutes)
Brand
INSTEON.
Smarthome
Other Ways to Shop
In Stock
Order the Smarthome Catalog


Use a Heavy-Duty INSTEON Switch to Control Hot Water Heaters or Other High Current Devices
INSTEON 240V 30 AMP Load Controller Normally Closed Relay (Dual-Band)
INSTEON 220V / 240V 30 AMP Load Controller Normally Closed Relay (Dual-Band)
Click for larger image and other views
Enlarged View with Wire Leads Side View
220V / 240V 30 AMP INSTEON Load Controller Normally Closed Relay (Dual-Band)
Item# 2477SA2
Price: $119.99
Qty:
Free shipping on orders over $175 - See Details

Overview

  • Remote On/Off control of 220V / 240V, 60Hz devices via INSTEON
  • Economically priced solution for controlling heavy-duty appliances up to 30 AMPs
  • Perfect for Hot Water Heaters
  • Dual-band device acts as Access Point for INSTEON RF only products
  • Easily installed between breaker panel and Water Heater - no neutral required
  • Acts as an active phase repeater for INSTEON signals

Essential Info

The INSTEON 220V / 240V 30 AMP Load Controller Normally Closed Relay (Dual-Band) lets you efficiently control the use of heavy duty appliances and take a step towards saving energy and cutting down on utility costs. It allows you to use other INSTEON devices to remotely control appliances, such as a hot water heater, that run on higher voltage, up to 30 Amps in a normally closed state. You can also use the local 'Set' button to toggle the attached load on and off. The relay comes with pre-configured wires and mounting hardware. There is no need to open the box for installation, simply identify the labeled wires and connect one set to your breaker panel and the other set to the high current appliance. This switch also uses INSTEON Dual-Band technology, which sends and receives INSTEON powerline and wireless radio frequency (RF) signals. This allows it to work as a phase bridge for superior signal reliability and as an access point for INSTEON RF and battery powered devices.

The INSTEON 220V / 240V 30 AMP Load Controller is also available as a Normally Open Relay, sold separately.

Required Accessories - Depending on your particular application, you will likely need:
4 to 6 large red wire nuts
3/4" conduit between the product and a near-by junction box
Suitable junction box for connection to existing wiring
Mounting screws

Manuals/Software

What's Included

  • INSTEON 220V / 240V 30 AMP Load Controller Normally Closed Relay (Dual-Band)
  • 1 Meter Long Long Wire Pigtails (makes for easy installation)
  • Quick-start Guide
  • More Info

    INSTEON
    INSTEON is a powerful home-control networking technology. INSTEON messages are transmitted throughout your home both wirelessly and through the home's existing wiring. All INSTEON messages are confirmed and repeated by INSTEON devices in the network, contributing to the outstanding reliability and performance of INSTEON products.

    X10 compatibility
    INSTEON 220V / 240V 30 AMP Load Controller Normally Closed Relay (Dual-Band) also works with legacy X10 products. If you have an existing X10 network, it provides an upgrade path to an INSTEON network.

    Safety Tested and Approved
    All of the components have been safety tested and approved.

    Specifications

    General
    Brand:INSTEON
    Manufacturer Product No.:2477SA2, INSTEON 220V / 240V 30 AMP Load Controller Normally Closed Relay (Dual-Band)
    UPC:813922010381
    Patent No:U.S. Patent No. 7,345,998, International patents pending
    Color:Gray
    Dimensions:8.6" H x 4.5" W x 2.5" D (21.8 cm H x 11.4 cm W x 6.4 cm D)
    Weight:1.40 lbs.
    Warranty:2 years
    Operation
    Local Control:Yes
    Load Sense:No
    Power Restore:Yes
    Application LED(s):Load Active
    Field Upgradable Support: No
    Operating Environment:Indoor
    Operating Temperature Range:-4° F to 122° F (-20° C to 50° C)
    Operating Humidity Range: 0-85% Relative Humidity
    INSTEON Features
    INSTEON Addresses:2 hard-coded (1 for Access Point, 1 for Relay)
    Maximum # of Controller Groups:3
    Maximum # of Responder Groups:1
    INSTEON Links (max):417 (total of controller and responder)
    INSTEON All-Link Support:Yes
    INSTEON Multi-link Support:No
    INSTEON Unlink Support:Yes
    INSTEON Multi-unlink Support:No
    INSTEON PLC (Powerline Carrier):Yes
    INSTEON RF:Yes
    INSTEON Powerline Minimum Transmit Strength:3.2 Vpp into 5 Ohms
    INSTEON PowerLinc Maximum Sensitivity:10 mVPP nominal
    INSTEON RF Range:100' minimum, open-air
    INSTEON Messages Repeated:Yes
    INSTEON Controller:Yes
    INSTEON Responder:Yes
    Electrical
    Input Power Voltage:220/240 Volts (+/- 10%) - Two 120-Volt split-single phase electrical lines
    Input Power Voltage Type:AC
    Input Power Voltage Phase Type:Split, single phase - connections only to leg A and leg B (no neutral connection)
    Input Power A/C Frequency:60 Hz
    Controllable Device Types:All INSTEON Responders
    Certification:Safety tested for use in USA and Canada (ETL #3193579)
    FCC ID:SBP2477SA
    Industry Canada:5202A-2477SA
    X10 Features (applies to power line only)
    X10 Scenes Supported:Yes
    # of Addresses Supported:1
    Address Only Support (can send A1 only commands):No
    Commands Supported:On, Off, All Units Off, Status Request
    Powerline Command Order:1) INSTEON Broadcast, 2) INSTEON cleanup 3) X10


    Images/Video

    Enlarged View with Wire Leads  Side View     
    Enlarged View with Wire Leads  Side View     

    Reviews

    27 Ratings
    5 star: 37%  (10)
    4 star: 22%  (6)
    3 star: 15%  (4)
    2 star: 4%  (1)
    1 star: 22%  (6)
    Average Customer Rating
    (27 customer ratings)
    Share your thoughts with other customers
    HARRY -- palo alto, CA   10/4/2013
    New; not much experience yet. Seems to work as described. I use it to turn off hot water heater while we are away.
    STEVEN -- california, KY   9/23/2013
    Works very reliably. Would have given 5-stars if price was cheaper, and size was smaller. Given current cost of switch, it is hard to justify for energy savings.
    FRED -- canton, GA   7/19/2013
    return it, after not having any luck getting any devices to show up when I outside my home network, I didn't want to waste anymore money until I know this system works
    Grant -- Northern California   6/18/2013
    First one failed after 3 days. Second failed at 6 weeks. This is junk but I have little choice to remotely control my 220v pool filter pump. I'll try it again I guess.
    CHRISTOPHER -- cave creek, AZ   5/29/2013
    Did not work right out of the box. Got the last one they had. My guess is that it was already bad and returned. I returned it and am still, some 3 weeks later, waiting on the refund.
    Alex v -- Key Biscayne FL   5/21/2013
    Both relays that I ordered failed after one week. Smarthome would not send me a new one to exchange so I had to pay $100 X 4 2 installs and 2 re-installs WHen I spoke with support they would not send me a product as a replacement without paying. As a platinum customer Im quite disapointed and hope this is not reflective of the quality of this product.
    GEORGE -- bridgeton, NJ   4/9/2013
    Does not play well with others!
    jmw -- Florida   12/10/2012
    My main interest in installing this on my water heater was to turn off the WH when we were away on trips. But it also acts as an RF link for switches on the far side of the house. I have it hooked up to my ISY-99 and works fine, not problems at all, easy to install.
    JKD -- glendale, ca   7/10/2012
    I use this to control a pool pump. No neutral wire needed. Easy hook with the existing Old school timer that was already there. Just connected the wires and searched with the Isy 994i which found it instantly. It has working flawlessly for the past month.
    Don -- schuylkill haven, PA   6/26/2012
    The relay works reliably as advertised, however the dual-band function is not reliable.
    NIGEL -- medford, NJ   6/2/2012
    Original unit stopped working 2 weeks before 2 yr. warranty expired. Great service from Smarthome who replaced it with no problems.
    ANTHONY -- roseville, CA   1/5/2012
    Replaced with the NO version and now everything works great!
    JAMES -- clifton, VA   12/29/2011
    The unit installed without problem and linked immediately. I am still trying to check out the functionality and find the owner's manual a little cryptic about the meaning of the lights and why the unit shows off on the ISY99i console with the load shown as "on" on the unit panel. A little trial and error should let me work it out. This is great as I can turn the water heater on my second home on in advance of when I visit and turn it off if I forget to turn it off when I leave. Works great. I had a litte trouble stuffing the number 10 wiring required inside a 4x4 box but I probably left the tailes of the circuit a little longer than a professional electrician might have. it does make it easier to wire for an amateur but a larger box might be indicated if any such exists ( I am going to ook for one at the hardware store).
    MARK -- jacksonville beach, FL   8/6/2011
    have these in 2 of my homes.. love them...
    JOSEPH -- austin, TX   6/18/2011
    EASY, NO PROBLEMS, WORKS GREAT!
    ROBERT -- star prairie, WI   1/16/2011
    Works as advertised. The instructions were easy to follow.
    ROBERT -- miami, FL   1/8/2011
    Works exactly as described. Easy to install and link up to my ISY-99 so I can run a program that limits the on and off time of my Hot Water heater. cons: A tad pricey perhaps?
    4 GUYS -- houston, TX   9/10/2010
    Love it. Just like everything Insteon makes it works perfectly.
    TODD -- carrollton, TX   8/1/2010
    Nice Device. Wish the included leads were longer for easier installation. Also the load active LED lights when there is no power to the load.
    ROBERT -- sumner, WA   7/20/2010
    It installs rather easily. It would be better if the attachment adapters were included for attaching to the junction box. You need a 3/4 adapter to a short pipe and another to the junction box. Set-up is easy and it works just like advertised.

    Accessories

    Mini Remote - INSTEON Wireless Switch  Mini Remote - INSTEON Wireless Keypad, 4 Scene     
    Mini Remote - INSTEON Wireless Switch  Mini Remote - INSTEON Wireless Keypad, 4 Scene     

    Related Items

    Customers Also Bought

    Sign-up for Exclusive Email offers 
    ORDERING INFO
    How to Order Track Your Package Shipping Returns Contact Us Customer Service Retail Store
    MORE INFO
    Getting Started Learning Center FAQ Dealers Customer Testimonials Affiliate Program
    OUR COMPANY
    About Us INSTEON Press Awards Employment Guarantees Security & Privacy
    STAY INFORMED
    Free Catalog Email Newsletter Forum RSS Site Map
    Have questions? Call us at 800-762-7846 (Mon-Fri 5am-7pm and Sat 6am-3pm PT) or send us a message
    Place your order by 3pm PT for same day shipping
    Copyright 1995-2014 SMARTHOME™
    Verisign Secure Site PayPal Acceptance Mark