|
Find Similar Products in:
|
|
|
|
| In-LineLinc Relay - INSTEON Remote Control In-Line On/Off Switch (Non-Dimming) |
|
|
| Item# 2475S |
Free shipping on orders over $200 details
|
|
|
|
|
Overview
|
- Wires in line for ceiling fans and fluorescent lighting circuits without wall switches
- Inserts in multiple whole-house lighting scenes in minutes
- Easy-to-install relay uses INSTEON technology for superior performance and reliability
Essential Info
In-LineLinc Relay — The Most Advanced Remote-Controllable On/Off ModuleFill your entire home with personalized mood lighting for any occasion. The In-LineLinc Relay allows you to include fluorescent or non-dimmable lights, fans, and other appliances in your INSTEON network. The Non-Dimming INSTEON In-LineLinc Relay is made to run silently no matter what kind of device you connect to it. The In-LineLinc Relay functions only as an on/off switch. If you need a dimmable in-line module to control incandescent bulbs, low-voltage halogen (e.g. track), and other low-voltage lights with magnetic or dimmable electronic transformers, use the INSTEON In-LineLinc Dimmer. How many times have you jumped into bed and forgotten to turn the lights off? With the Non-Dimming In-LineLinc Relay's remote control ability, you can have the convenience of adding a bedside controller to turn off your lights after you get into bed. Never come home to a dark house again: Install the INSTEON PowerLinc Controller, USB on your computer to schedule any INSTEON Non-Dimming In-LineLinc Relay or any other INSTEON-compatible device to turn on or off at any specific time or even at sunrise and sunset. The In-LineLinc Relay can control a 400-watt incandescent load or 10-amp inductive load. Please Note: This INSTEON module does not include a sense wire, for use with a 120V switching sensor. If you need this feature, a INSTEON In-LineLinc On / Off Module (Non-dimming) with Sense is sold separately. View our Videos:Smarthome Home Tour
Would you like to try INSTEON before you buy? Check out our Flash Demo to take a test drive!
Manuals/Software
What's Included
INSTEON In-LineLinc Relay (Non-Dimming)
Quick-Start Guide
2 mounting screws
3 wire nuts
|
More Info
|
Easy To Install
The In-LineLinc Relay is easy to install and set up. Use the provided screws to mount in a standard J-box or remove them using the screw tabs to mount in a more compact area such as a ceiling fan fixture box. Screw tabs can be removed using pliers when you are installing into a fixture box with limited space. Control each fan individually or all of your fluorescent lights with a single In-LineLinc Relay.
Perfect for Locations without a Switch
Whether you're planning to install Malibu lighting or ceiling fans or have already done so, you don't need to go through the hassle of running the wiring for a new wall switch. By installing an In-LineLinc in a fixture box, you'll be able to control the fixture from any location in your home. Simply install the In-LineLinc in the fixture box, link it manually or via HouseLinc 2 - INSTEON Desktop Software software, and you'll be able to turn fixtures on and off them using any INSTEON-compatible controller.
Easy to Program
Programming an In-LineLinc can be easily done a couple of different ways. The Tap method is best for your initial setup. Simply go into linking mode on any INSTEON-compatible controller and then press the set button on the In-LineLinc for 3 seconds; the load and the status LED will flash. You are now linked and can control the In-LineLinc from the controller of your choice. Keep in mind that once installed in a fixture, the In-LineLinc will not be easily accessible, thus making new links and scene programming difficult. We recommend using software such as HouseLinc 2 - INSTEON Desktop Software to manage the links of your In-LineLinc after it is installed. Remember, you will need to have the INSTEON ID in order to program with software.
Built with a Quieter Relay
Because the In-LineLinc Relay is built with a much quieter relay than most remote-control ON/OFF relays, it has a click that's more than 80 percent quieter than traditional relay switches. This allows you to control lights and other non-dimmable devices remotely without waking up the baby, annoying other family members, or sending your cat fleeing across the room. The click of the In-LineLinc Relay's internal relay is barely audible.
Generates Less Heat
Unlike triac-based switches, the In-LineLinc Relay uses a hard-contact relay to control the load. Other switches use a semiconductor that absorbs about two volts of power and dissipates the heat through the front of the module. By using a relay, the device runs cooler and full voltage gets to the load.
Scene Lighting
Scenes allow you to control multiple lights and appliances, rooms, or even the whole home with a single command. Because the In-LineLinc Relay can be a member of more than 400 scenes (i.e. "Movie Time," "Party," "Romance," etc.), you'll be able to launch various lighting scenarios with a single button press. These are elegant features usually found only in systems costing tens of thousands of dollars and requiring extensive rewiring of your home. If you want to control multiple scenes from one controller, we suggest the INSTEON KeypadLinc V2 Dimmer.
Compatibility
The In-LineLinc Relay is fully INSTEON compatible and X10 ready. Homeowners with existing X10 networks can easily migrate to an INSTEON network without having to discard all their existing X10 devices. X10 ready means that the In-LineLinc Relay can respond to X10 commands from an X10 controller and it can send X10 commands to X10 devices. Please note that INSTEON devices repeat INSTEON signals but not X10.
Non-Volatile Memory
All In-LineLinc Relay settings are stored in non-volatile memory and are not lost during power failures. Additionally, in the event of a power loss, the In-LineLinc Relay will return to its last on/off state when power is restored.
Certifications and Warranty
All In-LineLinc products are safety approved. The factory for SmartLabs Design Products is ISO 9001 certified. In order to meet the ISO 9001 standards, the entire factory underwent rigorous inspections of procedures and policies before being certified. The certification received was based on its dedication to high-quality management systems and strict adherence of quality control systems and guidelines. Because of this, SmartLabs stands behind the entire In-LineLinc line of products with a full 2-year warranty.
|
Specifications
|
Specifications | | General | | Brand: | Smarthome | | Manufacturer: | SmartLabs Design | | Manufacturer Product No.: | 2475S, INSTEON In-LineLinc Relay (Non-Dimming) | | UPC: | 689076402842 | | Patent No.: | U.S. Patent No. 7,345,998, International patents pending | | Warranty: | 2 years, limited (Upgradeable to 7 years) | | Operation | | Operation Modes: | INSTEON only, X10 only, INSTEON and X10 Combo Mode | | Combo Mode Message Order: | INSTEON, X10, INSTEON cleanup | | LED Indicator: | Off when load is on and vice versa | | Multi-Way Circuit Support: | Yes, as a receiver only that controls a load | | Setup Memory: | Non-volatile EEPROM | | INSTEON Features | | INSTEON Addresses: | 1 hard-coded out of 16,777,216 possible | | INSTEON Links: | 417 out of 16,777,216 possible | | INSTEON Powerline Frequency: | 131.65 KHz | | INSTEON Minimum Transmit Level: | 3.2 Vpp into 5 Ohms | | INSTEON Minimum Receive Level: | 10 mV | | INSTEON Messages Repeated: | Yes | | Mechanical | | Wire Nuts: | 3 included | | Mounting: | Mounts in single or multiple-ganged junction box or fixture such as a ceiling fan. | | Operating Conditions: | Indoors, 0 to 104°F, up to 85% relative humidity | | Dimensions: | 3.75" H x 1.8" W x 1.2" D (2.75" H without screw tabs) | | Weight: | 3.6 oz | | Electrical | | Supply Voltage: | 120 Volts AC +/- 10%, 60 Hertz, single phase | | Surge Protection: | MOV rated for 150 Volts | | Power Wire Leads: | 6", 16 AWG, stranded, 600V, 105°C insulation, ends stripped and tinned, LINE (black), LOAD (red), NEUTRAL (white) | | Compatible Load Types: | Wired-in incandescent lighting and inductive loads | | Ground Lead: | 6", 18 AWG, stranded, bare copper | | Load Types: | Wired-in incandescent lighting and inductive loads | | Maximum Load: | 13 Amps; 400 Watts (for incandescent loads) | | Minimum Load: | No minimum load required | | Certification: | Safety tested for use in USA and Canada (ETL #3017581) | | X10 Features | | X10 Primary Address: | 1 | | X10 Scene Addresses: | 255 possible | | X10 Status Response: | Supported | | X10 Resume Dim: | Supported (by setting Local On-Level to zero) | | X10 Powerline Frequency: | 120 KHz | | X10 Minimum Transmit Level: | 3.2 Vpp into 5 Ohms | | X10 Minimum Receive Level: | 20mV into 5 Ohms | | X10 Messages Repeated: | No |
|
Images/Video
|
|
|
Reviews
|
|
|
Accessories
|
|
|
Related Items
|
|
|
|
|
|
INSTEON In-LineLinc On / Off Module (Non-dimming) with Sensew/ Sense
|
INSTEON Outletlinc, Ivory
|
INSTEON Outletlinc, White
|
INSTEON Outletlinc, Black
|
|
|
|
|
|
INSTEON LampLinc Dimmer (3-Pin)
|
INSTEON ControLinc
|
INSTEON KeypadLinc with White Tabletop Enclosure Kit
|
INSTEON KeypadLinc with Black Tabletop Enclosure Kit
|
|
|
|
|
|
INSTEON RemoteLinc Wireless Remote Control
|
INSTEON SwitchLinc V2 Relay
|
Keypadlinc - Insteon 8 Button Keypad Countdown Timer With Dimmer, White
|
KeypadLinc - INSTEON 6-Button Keypad Controller With Dimmer, White
|
|
|
|
|
|
KeypadLinc - INSTEON 8-Button Keypad Controller With Dimmer, White
|
INSTEON ToggleLinc Relay (Non-Dimming), White
|
IRLinc - INSTEON IR Receiver
|
INSTEON SwitchLinc Relay (Non-dimming), White
|
|
|
|
|
|
|
KeypadLinc - INSTEON 6-Button Keypad Controller With Dimmer, White
|
INSTEON ToggleLinc Relay (Non-Dimming), White
|
INSTEON SwitchLinc Dimmer (High Wattage)
|
INSTEON SwitchLinc Dimmer
|
|
|
|
|
|
HouseLinc 2 - INSTEON Desktop Software w/ USB Interface
|
HouseLinc 2 - INSTEON Desktop Software w/ Serial Interface
|
INSTEON Products
|
|
|
|
|
|
|
|