Add $50.00 for FREE shipping
Plug-in & Screw-In Modules Type
Plug-In Dimmers
Load Type
Electronic Low Voltage
Incandescent / Halogen
Magnetic Low Voltage
Elk : M1
Radio Frequency (RF)
2-Way Communication
Adjustable On Levels
Adjustable Ramp Rates
Scene Capability
Maximum Incandescent Load
300 Watts.
Maximum Load
300 Watts
Ease of Installation
Beginner (Installs < 10 minutes)
Other Ways to Shop
Customer Favorites
In Stock

Fully Redesigned Lamp Dimmer for Enhanced INSTEON Remote Control
LampLinc - INSTEON Plug-In Lamp Dimmer Module (Dual-Band)
LampLinc - INSTEON Plug-In Lamp Dimmer Module
(Dual-Band), 2-Pin
Click for larger image and other views
Side and Front
LampLinc - INSTEON Plug-In Lamp Dimmer Module (Dual-Band), 2-Pin
Item# 2457D2
Price: $49.99
Free shipping on orders over $50 - See Details


  • Control a light remotely, turning it on and off and adjusting brightness levels
  • Full local control (Dim/Bright, On/Off)
  • Incorporate a lamp into multiple lighting design scenes in minutes
  • Transmits and receives INSTEON commands via powerline and RF
  • Doubles as an Access Point
  • Award-winning INSTEON technology: the ultimate in simplicity and reliability

Essential Info

The INSTEON LampLinc Dimmer (Dual-Band) is a full-featured plug-in lamp dimmer that can be remotely controlled by a Mini Remote, KeypadLinc, or any other INSTEON controller. This simple-to-use plug-in dimmer has advanced features like an adjustable ramp rate that slowly brings the lamp on, a preset dim level that stores your preferred choice of 32 brightness levels when turning the lamp on initially, as well as local control, so you can still use the lamp's built-in switch to turn the light on and off. This LampLinc is made to be plugged into any wall outlet. This dimmer can control incandescent loads up to 300 watts.

Until now, lamp and appliance controllers only received INSTEON signals via the powerline. Now with the dual-band LampLinc you not only receive RF commands directly from any RF INSTEON component (Mini Remote, Thermostat adapter) but the device doubles as an Access Point - relaying RF and powerline signals to other INSTEON-compatible devices in the home.

Never come home to a dark house again: Install HouseLinc - INSTEON Desktop Software on your computer to schedule any LampLinc or any other INSTEON-compatible device to turn on or off at any specific time or even at sunrise and sunset.


What's Included

  • LampLinc - INSTEON Plug-In Lamp Dimmer Module (Dual-Band), 2-Pin
  • Quick-start Guide
  • More Info

    Easy To Install
    The LampLinc is easy to plug-in and set up that you'll want to add LampLinc dimmers to all of your lamps. Just unplug the lamp, plug the lamp into the bottom outlet of the dimmer, and plug in the dimmer where the lamp was plugged in. Link the dimmer to an INSTEON controller using the Plug & Tap programming method, and you'll be able to turn the lamp on and off, brighten and dim.

    Learn more about INSTEON.

    Brightness Levels
    You can adjust the brightness level of the controlled lamp by pressing and holding the on or off button of an INSTEON controller. The brightness level can also be adjusted on the module via the Up/Down buttons. Adjusting brightness levels is especially helpful when you want to create a theatrical experience when watching your favorite movie. Use a Mini Remote or pair your universal remote control with an IRLinc, and you won't even have to leave the comfort of your couch to dim the light. When you turn on the LampLinc dimmer, it automatically comes on to full brightness. Setting the preset on level will make the dimmer stop at your preferred choice of 32 brightness levels. With software you can control brightness levels in one percent increments for ultimate flexibility. This is a great feature for your bedroom to set the mood.

    Adjustable Ramp Rate
    Adjust the speed at which the controlled light turns on or off, also known as the ramp rate. For example, you may want the lamp in the kids' room to turn on instantly so you can see where you're walking. Alternatively, you may want the lamp in the master bedroom to ramp up in a soft, gentle fashion so that you're not blinded when you wake up in the morning. The ramp rate is adjustable between 0.1 seconds and 9 seconds if programmed locally; this can be done by using the convenient Up/Down buttons located on the module. The ramp rate can extend up to 8 minutes (for a simulated sunrise or sunset) if programmed remotely. This is a great addition to your morning alarm, slowly turning the light on to help you wake up. If you have programmed a slow ramp rate and want to make the lamp come on instantly, simply double tap the controller's on button. To turn the light off quickly, double tap the controller's off button.

    Red/Green Status LED
    The Status LED is used for setup programming. It is now located at the top of the module for easier viewing when programming or troubleshooting.

    Create Multi-Way Circuits
    Want to be able to synchronize a wall switch with your lamp so that when your recessed lights are controlled at the switch, your floor lamp follows along? You can do it with INSTEON. Simply link your LampLinc with an INSTEON-compatible wall switch and in seconds you're done.

    Scene Lighting
    Scenes allow you to set unique lighting levels across multiple lights and trigger them with a single command. Because the LampLinc can be a member of more than 400 scenes (i.e. "Movie Time," "Party," "Romance," etc.), you'll be able to launch various lighting scenarios with a single button press on any INSTEON controller. These are elegant features usually found only in systems costing tens of thousands of dollars and requiring extensive rewiring of your home. All scene member lights can ramp to your independently desired brightness levels at your chosen ramp rate(s), so one set of lights can dim slowly while another set turns off instantly, all controlled with one command from one button.

    Non-Volatile Memory
    All LampLinc Dimmer settings are stored in non-volatile memory and are not lost during power failures. Additionally, in the event of a power loss, the LampLinc Dimmer's lamp will return to its last brightness level when power is restored.

    Smarthome stands behind the entire INSTEON LampLinc line of products with a full 2-year warranty.



    Manufacturer Product No.2457D2 - LampLinc - INSTEON Plug-In Lamp Dimmer Module (Dual-Band), 2-Pin
    Patent No.Protected under US and Foreign Patents (see
    Warranty2 years
    FCC IDSBP2457D2A
    Industry Canada5202A-2457D2A
    Status LEDRed and Green
    Preset On LevelYes - levels from 1% to 100%
    Ramp Rate (full-ON to full-OFF) 0.125 to 9 seconds if programmed locally, 0.125 seconds to 8 minutes if programmed remotely via software
    Local ControlOn/Off buttons on the unit
    Operation ModesINSTEON only
    Combo Mode Message OrderINSTEON, INSTEON cleanup
    Setup MemoryNon-volatile EEPROM
    INSTEON Features
    INSTEON Addresses1 hard-coded out of 16,777,216 possible
    INSTEON Links417
    INSTEON Powerline Frequency131.65 KHz
    INSTEON Minimum Transmit Level3.2 Vpp into 5 Ohms
    INSTEON Minimum Receive Level10 mVpp nominal
    INSTEON Messages RepeatedYes
    Radio Frequency 915MHz
    Ramp Rates (full-ON to full-OFF):0.125 to 9 seconds if programmed locally, 0.125 seconds to 8 minutes if programmed remotely via software
    X101 optional (comes unassigned)
    Operating ConditionsIndoors, 32 to 104° F, up to 85% relative humidity
    Dimensions3.2" H x 2.05" W x 1.05" D
    Weight3.3 oz
    Supply Voltage120 Volts AC +/- 10%, 60 Hertz, single phase
    Power Plug2-pin polarized
    Controlled Outlet2-pin polarized
    Pass-through OutletNo
    Load TypesPlug-in incandescent lighting devices
    LoadMin. 5W, Max. 300 Watts
    Power Consumption:0.84 Watts
    CertificationSafety tested for use in USA and Canada (ETL #3193579)


    Side and Front       
    Side and Front       


    440 Ratings
    5 star: 64%  (280)
    4 star: 16%  (70)
    3 star: 7%  (30)
    2 star: 5%  (22)
    1 star: 9%  (38)
    Average Customer Rating
    (440 customer ratings)
    Share your thoughts with other customers
    Dodger -- boise, ID   8/18/2014
    Small, looks nice. Functions as advertised, but... these do NOT support load-sensing as did previous models. With load-sensing, if the unit is 'off', you can locally switch on the lamp by turning the lamp off, then on -- no need to find a controller. just turn the light on! I really don't understand how companies can remove product features with replacement items.... product marketing genius.
    KATHI -- ft lauderdale, FL   7/24/2014
    RICHARD -- beverly hills, MI   7/13/2014
    Great product quick service
    ANTHONY -- west jordan, UT   7/10/2014
    So far, works great!! Easy to install.
    BOB -- leander, TX   7/4/2014
    I'm an X10 user from way back, switched to Insteon last year, products are darned near perfect...
    CHRIS -- jupiter, FL   6/13/2014
    Great! Worked 1st time in five minutes flat.
    TIMOTHY J -- oak park, IL   5/29/2014
    Great for lights. Ordered 13 and only had to return one. VERY EASY to setup
    DENNIS -- champaign, IL   4/30/2014
    No problem with set up, works just fine.
    MICHAEL -- college station, TX   4/21/2014
    Works great.
    ART -- raleigh, NC   3/17/2014
    this needs to be updated so turning on the lamp also turns on the lamp instead of locating the module on the wall under the table trying to locate the switch ... like it is done with the x10 module
    RC -- woodbury, MN   3/3/2014
    dual band, on-off switch and viewable status LED all good
    Mike V -- pa,   2/23/2014
    Wow, opened box and was installed in 10 minutes. I was concerned but wow it was that simple. I am ok at being handy and this was simple.
    CHRISTOPHER -- frederick, MD   2/16/2014
    Worked as advertised. Plugged my lamp into it and now it is a part of a larger scene.
    ROBERT -- flemington, NJ   2/15/2014
    Smaller than previous models. But I wish this had a 3-pronged outlet and an uncontrolled outlet on the front like the old models. No idea why they would have changed these good features.
    GARY -- portland, OR   2/7/2014
    Works as advertised.
    Lenny -- New York   1/28/2014
    Plug it in, initiate adding it to the network through the app, press and hold the link button, plug in your lamp and your done. So simple to install add and use, and it works every time. I have 2 and being dual band they also bridge the phases for my power-line only modules. Couldn't ask for more.
    DANIEL -- cottage grove, MN   1/19/2014
    Works as described, easy to istall and get running. Seems robust.
    SPENCER -- vidor, TX   1/16/2014
    I bought two of these and they work great. These turn on lights in a garland and a spray of lights built into cottonwood branches as accent lighting. They were easy to add to the network and have always performed flawlessly.
    ALON -- great neck, NY   1/16/2014
    Very easy to set up and program. Also functions as an access point to increase the coverage range.
    WILLIAM -- washington, DC   1/10/2014
    Is as promised. The unit came packed similar to an apple product. No wonder I am liking these products more and more.


    Mini Remote - INSTEON Wireless Switch  Mini Remote - INSTEON Wireless Keypad, 4 Scene     
    Mini Remote - INSTEON Wireless Switch  Mini Remote - INSTEON Wireless Keypad, 4 Scene     

    Related Items

    Customers Also Bought

    Sign-up for Exclusive Email offers 
    How to Order Track Your Package Shipping Returns Contact Us Customer Service Retail Store
    Getting Started Learning Center FAQ Dealers Customer Testimonials Affiliate Program
    About Us INSTEON Press Awards Employment Guarantees Security & Privacy
    Free Catalog Email Newsletter Forum RSS Site Map
    Have questions? Call us at 800-762-7846 (Mon-Fri 5am-7pm and Sat 6am-3pm PT) or send us a message
    Place your order by 3pm PT for same day shipping
    Copyright 1995-2014 SMARTHOME™
    Verisign Secure Site PayPal Acceptance Mark