Add $50.00 for FREE shipping
INSTEON LampLinc V2 Dimmer
LampLinc - INSTEON Plug-In Lamp Dimmer Module, 3-Pin
LampLinc - INSTEON Plug-In Lamp Dimmer Module, 3-Pin
Item# 2456D3
Free shipping on orders over $50 - See Details

Overview

Essential Info

This lamp module is no longer available and has been replaced with a dual-band version: LampLinc - INSTEON Plug-In Lamp Dimmer Module (Dual-Band), 2-Pin.

Manuals/Software

What's Included

  • INSTEON LampLinc 3-Pin
  • Quick-start guide
  • Specifications

    Specifications

    General
    Brand:Smarthome
    Manufacturer Product No.:2456D3, INSTEON LampLinc Dimmer (3-Pin)
    UPC:891114000051
    Patent No.:U.S. Patent No. 7,345,998, International patents pending
    Color:White
    Warranty:2 years, limited (Upgradeable to 7 years)
    Operation
    Status LED:White
    On-Levels:32 locally, increments of 1% with software
    Ramp Rate (full-ON to full-OFF):0.125 to 9 seconds if programmed locally, 0.125 seconds to 8 minutes if programmed remotely
    Local Control:None
    Load Sensing:Available (Off by default)
    Operation Modes:INSTEON only, X10 only, INSTEON and X10 Combo Mode
    Combo Mode Message Order:INSTEON, INSTEON cleanup, X10
    Multi-Way Circuit Support:Yes, as a receiver only that controls a load
    Setup Memory:Non-volatile EEPROM
    INSTEON Features
    INSTEON Addresses:1 hard-coded out of 16,777,216 possible
    INSTEON Links:417
    INSTEON Powerline Frequency:131.65 KHz
    INSTEON Minimum Transmit Level:3.2 Vpp into 5 Ohms
    INSTEON Minimum Receive Level:10 mV
    INSTEON Messages Repeated:Yes
    Mechanical
    Operating Conditions:Indoors, 32 to 104°F, up to 85% relative humidity
    Dimensions:4.0" H x 2.5" W x 1.5" D
    Weight:5 oz
    Electrical
    Supply Voltage: 120 Volts AC +/- 10%, 60 Hertz, single phase
    Surge Protection:MOV rated for 150 Volts
    Compatible Load Types:Plug-in incandescent lighting devices
    Power Plug:3-pin grounded
    Pass-through Outlet:Uncontrolled 3-prong (with ground), 120V, 15A
    Controlled Outlet:3-pin grounded
    Load Types:Plug-in incandescent lighting devices
    Maximum Load300 Watts
    Power Consumption:1.48 Watts
    Certification:Safety tested for use in USA and Canada (ETL #3017581)
    X10 Features
    X10 Primary Address:1 optional (comes unassigned)
    X10 Scene Addresses:255 possible
    X10 Status Response:Supported
    X10 Resume Dim:Supported (by setting X10 Primary Address On-Level to zero)
    X10 Powerline Frequency:120 KHz
    X10 Minimum Transmit Level:3.2 Vpp into 5 Ohms
    X10 Minimum Receive Level:10 mVpp nominal
    X10 Messages Repeated:No


    Reviews

    899 Ratings
    5 star: 67%  (599)
    4 star: 19%  (172)
    3 star: 7%  (67)
    2 star: 2%  (21)
    1 star: 4%  (40)
    Average Customer Rating
    (899 customer ratings)
    Share your thoughts with other customers
    STEVE -- englewood, CO   8/20/2012
    So easy to use... I just keep a few on hand at any time because we're always putting them to good use.
    DENNIS -- amherst, OH   4/19/2012
    Was unable to use it because the Controller would not work. The replacement one wouldn't either. They both were unable to aquire an IP address.
    HATEMBERTH -- tampa, FL   4/16/2012
    work's perfect but need IR device to use in my harmony one
    ADAM -- winnipeg, MB   4/12/2012
    Turns lights on within a small delay from the Iphone app. The only thing i'd like to see is quicker responce time from this. Especially when using the dimmer. Lag has a tendancy to dim the lights too low or too bright. Recent updates to the app seem to have improved on this. Keep it up!
    RICHARD H -- lansing, IL   4/7/2012
    Great device, have these all over the house
    DAVID -- clovis, CA   3/25/2012
    Great to start with. Bought this, the controller and a couple light switches. Once I got this sync'd with the controller it was a snap
    DOUG -- omaha, NE   3/21/2012
    order was great except I originally ordered 3 of these, received one, and the packing slip indicated 3. Come on guys, pick the order right, please. On the other hand, the remaining 2 were shipped right away after I emailed. Thanks. Wish there was some better control software for this. Great product.
    JOHN -- virginia beach, VA   3/16/2012
    Works exactly as advertised; simple to install
    JEROME -- fort collins, CO   2/20/2012
    awesome. great product!
    FRANCISCO -- schererville, IN   2/12/2012
    I just love this stuff
    DOUG -- toms river, NJ   2/12/2012
    I have 5 of these units installed in the house, used for candles in windows. Will be purchasing more for holiday lighting in the future. They replaced similar X-10 plug-in modules. Insteon are much more reliable and with the linking ability, require less programming in the PC. Pass-thru outlet is also a plus. Highly recommended.
    JERRY -- prairie village, KS   1/29/2012
    Easy to add on to the Insteon system.
    RON -- shrewsbury, MA   1/12/2012
    I've been an X-10 user for decades. Insteon is much more reliable and these modules work flawlessly.
    LAURA -- chicago, IL   1/10/2012
    The modules don't work. They won't send status. When the module is queried the controller never gets a response back.
    MATT -- allentown, PA   1/6/2012
    I have 6-7 of these. Work great!
    KEVIN -- mchenry, IL   1/6/2012
    This Insteon LampLinc works great, is silent, and is always in the background controlling my lights, on and off everyday of the year. Its a great product.
    MICHAEL -- sedona, AZ   1/5/2012
    Poor quality. Unfortunately I have committed to the Insteon line in both my home & office. 30% of the times a 3 way 150 watt bulb, or a 50 watt halogen flood burns out it causes the dimmer to fail. Statistically this happens after the warranty has expired. Both my home and office have whole house surge protectors. Additionally, both have APC UPS units that log any power line issues. In the past I have written regarding this poor quality, specifically regarding the failure of the KeypadLink units that fail when loaded to only 70% of the rated capacity. These are installed in single gang metal boxes, so no deraiting is applicable. Despite the numerous survey forms I have completed I have never received a return contact from SmartHome. The items ordered were out of warranty replacements for units that failed when the 150 watt bulbs burnt out. How about having the curtesy to reply to a long-time customer.
    PETER -- cary, NC   1/2/2012
    Sure is an easy way to add a switched outlet.
    JAMES -- apex, NC   12/30/2011
    Quick ship, easy to install and configure. Works perfectly. Big improvement over my old X10 modules.
    ANTHONY -- dublin, OH   12/28/2011
    works exactly as advertised. No issues. Very easy to link/unlink to the 6 button switch.

    Related Items

    Sign-up for Exclusive Email offers 
    ORDERING INFO
    How to Order Track Your Package Shipping Returns Contact Us Customer Service Retail Store
    MORE INFO
    Getting Started Learning Center FAQ Dealers Customer Testimonials Affiliate Program
    OUR COMPANY
    About Us INSTEON Press Awards Employment Guarantees Security & Privacy
    STAY INFORMED
    Free Catalog Email Newsletter Forum RSS Site Map
    Have questions? Call us at 800-762-7846 (Mon-Fri 5am-7pm and Sat 6am-3pm PT) or send us a message
    Place your order by 3pm PT for same day shipping
    Copyright 1995-2013 SMARTHOME™
    Verisign Secure Site Google Wallet Acceptance Mark PayPal Acceptance Mark