|
Find Similar Products in:
|
|
|
| Thermostat Adapter - INSTEON and Totaline / Venstar Compatible |
|
|
| Item# 2441V |
|
|
|
|
|
|
Overview
|
- Save energy and money on bills by remotely controlling your thermostat
- Compatible with Totaline/Venstar T1700, T1800, and T1900 thermostats
- No batteries! INSTEON Adapter is powered by thermostat
- Award-winning INSTEON technology provides superior performance and reliability
Essential Info
Control the temperature from anywhere in the house! INSTEON Thermostat Adapter allows you to recall stored set point/mode settings from any INSTEON-compatible controller. Faster than grabbing a blanket, you can use your coffee table RemoteLinc to recall "comfort mode," bringing the room that perfect temperature. When turning off your lights for the night from your bedside KeypadLinc you can also save some energy and money by recalling "energy-savings mode" which minimizes the activity of your HVAC system while you're sleeping. Because you can program any button on an INSTEON controller to any temperature and mode on the thermostat, the possibilities are endless. Compatible Thermostat Required: INSTEON Thermostat Adapter is compatible with the following Totaline / Venstar thermostats: T1700 (1-Day Programmable Thermostat): As a kit 2491T1 : Thermostat only 30410A
T1800 (7-Day Programmable Thermostat): As a kit 2491T7 : Thermostat only 30411A
T1900 (7-Day Programmable Thermostat, Dual Fuel): Thermostat only 30412A
These thermostats require power to function. If you do not have a "common" wire running to your thermostat from your heating/cooling equipment, you may need either to run a new wire or to install a thermostat power supply module.
Rev. 2 New Features
Reports changes in temp, temp setpoints, mode, and fan mode
Controller functionality on heat call, cool call, and fan call (auto & manual ON)
Supports +1, -1 degree on incremental bright/dim commands
Off Button functionality - If you want a link to respond to an Off command instead of an On command, send an Off command from the INSTEON controller within 30 seconds of linking and before any other INSTEON commands are sent.
Note: INSTEON Thermostat Adapter is an RF-only INSTEON product, which is not X10 compatible. At least one Access Point is required to communicate with your plug-in or wire-in INSTEON-compatible devices.
View our Videos:
Smarthome Home Tour
Would you like to try INSTEON before you buy? Check out our Flash Demo to take a test drive!
Manuals/Software
What's Included
INSTEON Thermostat Adapter
Quick-Start Guide
|
More Info
|
Easy To Install
Once you've installed your thermostat, INSTEON Thermostat Adapter snaps right into the jack on the bottom of your thermostat. Now all you need to do is set the thermostat to the mode/temperature you want and link it to the INSTEON controller of your choice, using INSTEON's simple Plug-n-Tap setup. Every time you activate that scene on the controller, your thermostat will return to the corresponding temperature. From plugging in your INSTEON Thermostat Adapter to changing the temperature from an INSTEON controller, setup takes as little as a couple of minutes.
Software
INSTEON Thermostat Adapter - Totaline / Venstar Compatible is compatible with HCA Standard and HCA Plus, home automation software allowing this adapter to be integrated into your home automation control system.
Non-Volatile Memory
All Thermostast Adapter settings are stored in non-volatile memory and are not lost during power failures.
Certifications and Warranty
All INSTEON products are safety approved. The factory for SmartLabs Design Products is ISO9001 certified. Because of this passion for quality, Smarthome stands behind the entire line of Smarthome-Brand INSTEON products with a full 2-year warranty.
|
Specifications
|
Specifications | | General | | Brand: | Smarthome | | Manufacturer: | SmartLabs Design | | Manufacturer Product No.: | 2441V INSTEON Thermostat Adapter for Venstar/ Totaline | | UPC: | 718122387212 | | Patent No.: | U.S. Patent No. 7,345,998, International patents pending | | Color: | White | | Range: | 150' (line of sight) | | Frequency: | 915 MHz | | Warranty: | 2 years, limited | | Compatible Thermostats | | Carrier/Totaline Residential: | P374-1700, P374-1800, P374-1900 | | Venstar Residential: | T1700, T1800, T1900
| | Carrier/Totaline Commercial: | P374-2700, P374-2800, P374-2900 | | Venstar Commercial: | T2700, T2800, T2900 | | Operation | | Status LED: | 1 Green LED (normally on) | | Setup Memory: | Non-volatile EEPROM | | Software Supported features (as avail via software such as HouseLinc 2) | | Heat set point: | Supports all set points of Thermostat | | Cool set point: | Supports all set points of Thermostat | | Temperature Status Request: | Supported | | Humidity Status Request: | Supported | | Mode Status Request: | Supported | | Fan Status Request: | Supported when in “Auto” mode | | Mode Control: | Heat, Cool, Auto, OFF | | Fan Control: | On, Auto | | Degree Format (F/C): | As Supported by Thermostat | | INSTEON Features | | INSTEON Addresses: | 1 hard-coded out of 16,777,216 possible | | INSTEON Links: | 417 out of 16,777,216 possible | | INSTEON Messages Repeated: | Yes | | Mechanical | | Operating Conditions: | Indoors, 32 to 122°F, up to 85% relative humidity | | Storage Conditions: | Indoors, 32 to 122°F, up to 85% relative humidity | | Dimensions: | 1.75" H x 2.89" W x .58" D | | Weight: | .80 oz | | Connector: | RJ11 4 wire (top of unit) | | Electrical | | Input Power: | 5VDC 30mA Standby (Powered from Thermostat) | | FCC Certification: | ID SBP2441 | | Industry Canada Certification: | IC :S202A-2441V |
|
Images/Video
|
|
|
Reviews
|
|
|
Accessories
|
|
|
Related Items
|
Customers Also Bought
|
|
|
|
|