Overview
|
 Five-channel easy-to-use tabletop controller- Install and set up in less than 5 minutes
- Works with legacy X10 products
- INSTEON technology received the Consumer Electronic Show (CES) Innovations 2005 Design and Engineering Award
Essential Info
INSTEON ControLinc Tabletop ControllerThe INSTEON ControLinc Tabletop Controller is an easy-to-use and quick-to-set-up plug-in tabletop controller. You can control up to five individual INSTEON-compatible devices or sets of devices with the tabletop ControLinc, which has a total of 14 buttons. Five sets of buttons turn your devices on and off. The "All On" and "All Off" buttons can control all devices linked to any of the five on/off buttons. "Bright" and "Dim" will adjust the brightness level of the any linked INSTEON-compatible wall dimmers or plug-in lamp dimmers. You can even put a ControLinc on your bedside table to control downstairs lamps if you hear a noise in the middle of the night. View our Videos:Remotely control your Christmas tree lights
Smarthome Home Tour
Would you like to try INSTEON before you buy? Check out our Flash Demo to take a test drive!
Manuals/Software
What's Included
INSTEON ControLinc V2
Quick-start guide
|
More Info
|
If this is your first INSTEON installation, the best way to get everything needed to start your lighting automation is with one of these three starter kits:
These starter kits include everything required to set up your INSTEON network. Learn more about INSTEON here.
SetupThe ControLinc uses a simple "Plug-N-Tap" process to link to other INSTEON devices. Put the ControLinc in setup mode by pressing any of the five ON buttons for 10 seconds, and then press the button on the module you would like to control. That's all it takes to link the ControLinc to any INSTEON module!
Scene CapableEach of the five ON/OFF buttons on the ControLinc can be set up to control one INSTEON module or multiple modules in a scene.
Works with Legacy X10 ProductsEach of the five ON/OFF buttons on the ControLinc can be assigned an X10 address. This enables the ControLinc to bridge your INSTEON network with your legacy X10 network. The ControLinc ON/OFF buttons can be assigned any X10 address and do not have to be assigned sequentially. This makes the ControLinc an excellent replacement for your existing X10 mini-controller.
Certifications and WarrantyAll INSTEON ControLinc products are safety approved. The factory for SmartLabs Design Products is ISO9001 certified. In order to meet the ISO 9001 standards, the entire factory underwent rigorous inspections of procedures and policies before being certified. The certification received was based on its dedication to high-quality management systems and strict adherence of quality-control systems and guidelines. Because of this, Smarthome stands behind the entire INSTEON ControLinc line of products with a full 2-year warranty.
|
Specifications
|
Specifications | | General | | Brand: | SmartLabs, Inc. | | Manufacturer: | Smarthome | | Manufacturer Product No.: | 2430, INSTEON ControLinc Tabletop Controller | | UPC: | 891114000181 | | Color: | Black | | Warranty: | 2 years (upgradeable to 7 years) | | Operation | | ON/OFF Button Pairs: | 5 Scenes | | ALL ON/ALL OFF Buttons: | Control all INSTEON and X10 devices linked to Channels 1-5 | | BRIGHT/DIM Buttons: | Control INSTEON and X10 devices linked to last pressed Channel | | Audio Alert: | Beeper, can be disabled | | Status LED: | White, can be disabled | | Operation Modes: | INSTEON only, X10 only, INSTEON and X10 Combo Mode | | Combo Mode Message Order: | INSTEON, X10, INSTEON cleanup | | Setup Memory: | Non-volatile EEPROM | | INSTEON Features | | INSTEON Addresses: | 1 hard-coded out of 16,777,216 possible | | INSTEON Links: | 417 out of 16,777,216 possible | | INSTEON Powerline Frequency: | 131.65 KHz | | INSTEON Minimum Transmit Level: | 3.2 Vpp into 5 Ohms | | INSTEON Minimum Receive Level: | 10 mV | | INSTEON Messages Repeated: | Yes | | Mechanical | | Mounting: | Included desk stand (flat or vertical) | | Button Type: | 14 Carbon puck onto etched PCB switches | | Button Appearance: | Roundish and rubbery | | Button Labels: | Printable using template | | Operating Conditions: | Indoors, 32 to 122°F, up to 85% relative humidity | | Dimensions: | 5.0" H x 6.4" W x 3.0" D | | Weight: | 1 lb 5 oz | | Electrical | | Supply Voltage: | 120 Volts AC +/- 10%, 60 Hertz, single phase | | Surge Protection: | MOV rated for 150 Volts | | Power Cord: | 6 ft, 2-pin polarized plug | | Certification: | Safety tested for use in USA and Canada (ETL #3017581) | | X10 Features | | X10 Addresses: | Up to 5 of 256 possible | | X10 Status Response: | Supported | | X10 Powerline Frequency: | 120 KHz | | X10 Minimum Transmit Level: | 3.2 Vpp into 5 Ohms | | X10 Minimum Receive Level: | 10 mVpp nominal | | X10 Messages Repeated: | No |
|
Images/Video
|
|
|
Reviews
|
|
|
Related Items
|
Customers Also Bought
|
|
View Cart 
