|
Find Similar Products in:
|
|
|
| Wireless INSTEON Motion / Occupancy Sensor |
|
|
| Item# 2420M |
|
|
|
|
|
Overview
|
- Built-in countdown timer automatically turns lights off 1 minute after you leave
- Optional night-only mode allows you to keep your lights off during the day
- Adjustable high/low motion sensitivity provides flexible placement
- Remotely control your INSTEON devices
- Excellent range - up to 150' from nearest Access Point or RF INSTEON device
- Award-winning INSTEON technology provides superior performance and reliability
Essential Info
Introducing the world's first INSTEON motion sensor: It turns on your INSTEON lights or appliances when you enter the room and turns them off after you've left. INSTEON Wireless Motion Sensor will immediately send a radio frequency (RF) INSTEON command to linked INSTEON devices when motion is detected. Truly automating your lighting, INSTEON Wireless Motion Sensor is perfect for areas of your home such as the laundry room, closets and the garage where lights commonly get left on. Use motion sensor for indoor or outdoor applications, and link it to your lights or appliances to activate a thermostat, turn on some lights or use it as a sensor to turn on your stereo. Powered by a 9V battery, it requires no additional wiring. Additional features include an 'Off' countdown timer delay, night-only mode, adjustable motion sensitivity, wireless range of up to 150', 40-foot field of vision and a pivoting mounting bracket. INSTEON Wireless Motion sensor is a must-have for any INSTEON home automation network as an addition that will make your life more convenient, fun and energy-efficient. A 9 Volt battery is required and included. Optional Power SupplyA Plug-In 9-Volt Power Supply (Battery Eliminator) can be used in place of a 9 Volt battery, eliminating the cost and trouble of regularly replacing the battery. To install, just notch a small hole using a file or shear on the Motion Sensor battery door (for the power supply wire) and plug it in. Required AccessoriesAn Access Point is required. Note: SignaLinc RF's do not work with INSTEON Wireless Motion Sensor.Note: INSTEON Wireless Motion Sensor is not X10 compatible.Note About PIR SensorsAs with all PIR (Passive Infrared) motion sensors, there are certain factors which can cause detection range / reliability to vary. Because PIR sensors rely on changes in heat to detect motion, be aware of the following factors that can effect PIR reliability when choosing a location to mount your INSTEON Motion Sensor: - Rapid environmental changes
- Direct sunlight
- Direct wind from a heater or A/C
- Fireplaces
Also, please note that certain types of treated glass may or may not act as an infrared 'wall' through which Motion Sensor cannot detect. If you want to detect motion through glass, we recommend you test it in your particular application. Note: Any accumulation of ice, snow or dirt on the Fresnel lens may also interfere with Motion Sensor’s ability to detect motion. Videos:INSTEON Motion Sensor in Action
Would you like to try INSTEON before you buy? Check out our Interactive Flash Demo to take a test drive!
Manuals/Software
What's Included
Motion Sensor
Mounting Bracket
2 Mounting Screws
9V Battery
Quick-Start Guide
|
More Info
|
Never Leave Another Light On Again
INSTEON Wireless Motion Sensor is a great energy-saver: Your lights will turn on when you enter and automatically turn off after you leave, so you’ll never have to worry about leaving your lights on. Also, INSTEON Wireless Motion Sensor has a built-in photocell, so it can be disabled during the day. If daylight is enough to light your house during the day, Motion Sensor can leave the lights off, even when motion is detected. Using Motion Sensor to limit the amount of time lights are on, is a great first step towards saving energy and protecting the environment.
Dusk / Dawn Sensor (INSTEON Software Required)
Save energy by ensuring lights are off at dawn or turn your porch lights on at dusk with INSTEON Motion Sensor's dusk / dawn feature. When used with supported INSTEON software or an INSTEON automation controller, Motion Sensor can also be used as a dusk/dawn sensor. After it has been bright for 3 and a half minutes, Motion Sensor will send an Off command for its 'Group 2', which can be used to turn off lights and appliances or trigger a software event. Conversely, it will send an On command after it has been dark for 3 and a half minutes.
Low Battery Warning
Get notified when it's time to change the battery. INSTEON Motion Sensor has 2 methods of indicating the battery life is low:
- LED double-flashes after motion is detected (even if LED is disabled)
- On command is sent to 'Group 3', which can be utilized with INSTEON software or an INSTEON automation controller
For extended battery life, consider purchasing a 9V Lithium battery which can extend battery life by 4 times.
If you have a need for the motion sensor to activate many links, using HouseLinc or another software that supports this product can extend battery life.
Painting INSTEON Wireless Motion Sensor
Motion Sensor has been manufactured with a surface that can be painted to blend in with your home décor. This gives you the ability to decide exactly what color will give your motion sensor installation that professional finished look. Please note, it is recommended that you protect the Fresnel lens during the painting process. Any excess paint or residue may cause motion sensor to operate improperly.
|
Specifications
|
Specifications | | General | | Brand: | Skylink | | Manufacturer: | Skylink | | Manufacturer Product No.: | 2420m | | Color: | White | | Range: | 150' (line of sight) | | Frequency: | 915MHz ISM Band | | Warranty: | 1 year | | UPC: | 718122388714 | | Patent No.: | U.S. Patent No. 7,345,998, International patents pending | | Operation | | Sensitivity Modes: | High (default) or Normal | | Status LED: | 1, Red behind PIR lens, normally off, blinks during setup | | Setup Memory: | Non-volatile EEPROM | | Motion Detection Range: | up to 110° arc, 40 feet | | Motion Detector Sense Input Type: | PIR and photocell | | Operating Temperature Range: | Indoor / Outdoor, 0 to 120°F. Note: PIR reliability may vary with temperature
| | Operating Humidity Range: | 10% - 90% | | INSTEON Features | | INSTEON Addresses: | 1 hard-coded out of 16,777,216 possible | | INSTEON RF: | Yes | | INSTEON Links: | 30 | | INSTEON Device Category: | 0x10 | | INSTEON Device Subcategory: | 0x01 | | INSTEON Product Key (IPK): | 0x00004A | | Mechanical | | Dimensions: | 2 1/4" x 3 1/4" x 1 7/8" | | Weight: | 4 oz | | Electrical | | Input Power Voltage Type: | 9VDC | | Power Supply: | 9VDC battery (included) | | Battery Life: | 6 months min. | | Certification: | FCC (pending) |
|
Images/Video
|
|
|
Reviews
|
|
|
Accessories
|
|
|
Related Items
|
Customers Also Bought
|
|
|
|
|
|