Overview
|
Essential Info
IRLinc INSTEON IR Receiver allows you to control your lights from the comfort of your couch. Keep the universal remote you have, set up an extra function button to a compatible IR code and you're ready to go! Set up "Movie Scene" to dim your sconces and turn off the kitchen light while settling in for a Friday night flick. Need more popcorn? Press the intermission button to brighten the sconces and turn on the kitchen light: No more fumbling around for light switches in the dark. Power in SimplicityIf you're one of those people who wants one remote for everything, IRLinc is a perfect fit. Keep the clutter off your coffee table by combining your home theater and lighting remotes into one. IRLinc comes with everything you need to control your INSTEON devices from your universal remote. View our Videos:Smarthome Home Tour
Would you like to try INSTEON before you buy? Check out our Flash Demo to take a test drive!
Manuals/Software
What's Included
IRLinc - INSTEON IR Receiver
IR Sensor w/ double-sided tape
Quick-Start Guide
|
More Info
|
Easy to Set Up
IRLinc is compatible with IR codes found in most universal remotes, which nearly guarantees your remote will work with it. IRLinc's talk-back LED allows you to identify easily which IR codes are compatible. After programming a compatible IR code into your remote, IRLinc is easy to set up like other Smarthome-brand INSTEON products, using simple Plug-n-Tap setup.
X10 Compatible
IRLinc is fully INSTEON compatible and X10 ready. Homeowners with existing X10 networks can easily migrate to an INSTEON network without having to discard all their existing X10 devices. X10 ready means that IRLinc can control X10 devices, using X10 commands. Please note that IRLinc can control either X10 devices or INSTEON devices, but not both for any given IR command sent from your universal remote.
Non-Volatile Memory
All IRLinc settings are stored in non-volatile memory and are not lost during power failures.
Certifications and Warranty
All IRLinc products are safety approved. The factory for SmartLabs Design Products is ISO9001 certified. Because of this passion for quality, Smarthome stands behind IRLinc with a full 2-year warranty.
|
Specifications
|
Specifications | | General | | Brand: | Smarthome | | Manufacturer: | SmartLabs Design | | Manufacturer Product No.: | 2411R IRLinc (IR to INSTEON Receiver) | | UPC: | 689076402941 | | Color: | Black | | Warranty: | 2 years, limited | | Operation | | Status LED: | 1 Blue LED (On side) | | Talk Back LED: | 1 Green LED (On Bottom) | | Operation Modes: | INSTEON only or X10 only | | IR Code: | NEC IR codes | | Setup Memory: | Non-volatile EEPROM | | INSTEON Features | | INSTEON Addresses: | 1 hard-coded out of 16,777,216 possible | | INSTEON Links: | 417 out of 16,777,216 possible | | INSTEON Powerline Frequency: | 131.65 KHz | | INSTEON Minimum Transmit Level: | 3.2 Vpp into 5 Ohms | | INSTEON Minimum Receive Level: | 10 mV | | INSTEON Messages Repeated: | Yes | | Mechanical | | Operating Conditions: | Indoors, 32 to 122°F, up to 85% relative humidity | | Storage Conditions: | Indoors, 32 to 122°F, up to 85% relative humidity | | Dimensions: | 4.0" H x 2.5" W x 1.5" D | | Weight: | 14.4 oz | | Electrical | | Supply Voltage: | 120 Volts AC +/- 10%, 60 Hertz, single phase | | Surge Protection: | MOV rated for 150 Volts | | Power Plug: | 3-pin grounded | | Pass-through Outlet: | 3-pin grounded | | Maximum Pass-through Load: | 15 Amps | | Certification: | Safety tested for use in USA and Canada (ETL #) | | X10 Features | | X10 Controlable Addresses: | 255 possible | | X10 Powerline Frequency: | 120 KHz | | X10 Minimum Transmit Level: | 3.2 Vpp into 5 Ohms | | X10 Messages Repeated: | No | | IR Sensor | | IR Sensor Head Dimensions: | 3/8" H x 1" W x 1 7/16" D | | Mounting type: | Adhesive Surface | | Cord Length: | 81.5" (tip to tip) | | Connector: | 1/8" mini plug | | Supply Voltage: | 2.7 VDC [min] - 5.0 VDC [max] |
|
Images/Video
|
|
|
Reviews
|
|
|
Related Items
|
|
|
|
View Cart 
