Overview

Controls fluorescent lights, electronic ballasts, halogen lamps, and low-voltage lighting transformers
Silent electronic control —
No loud, annoying "clunk!"
Three-way and greater lighting circuit capability
Enhanced X10 Sensitivity —
will work when others fail
Low X10 Signal Absorption

Essential Info

ToggleLinc PLC Switch — For Affordable Automation of Non-Dimmable Lighting
If you need to control fluorescent or other non-dimmable lighting, but don't need 2-way status or scene ability, the ToggleLinc PLC Switch is for you! The ToggleLinc PLC Switch is designed for use with fluorescent lights, electronic ballasts, halogen lamps and low voltage lighting transformers (3-wire connection with a neutral wire required).

Manuals/Software

What's Included

ToggleLinc PLC Switch, Ivory

Owner's Manual

2 mounting screws

5 wire nuts

More Info

It comes with all the great features of the ToggleLinc 2-Way Switch except 2-way transmission and scene lighting, but at a greatly reduced price.

Silent Operation
The ToggleLinc PLC Switch does not make the loud "clunk!" normally associated with turning on/off fluorescent lights with an appliance module or X10 controllable relay switch. All you get is reliable, silent electronic control.

Low X10 Signal Absorption
The ToggleLinc PLC Switch is specifically designed to minimize the X10 signal attenuation found in all X10 devices. This makes it ideal for applications requiring a large number of switches.

True Toggle Action with Beautiful, High Quality Construction
Unlike other X10-compatible switches, the ToggleLinc 2-Way Dimmer offers the natural feel of high-end switches: flip up to turn lights on, flip down to turn lights off. You'll also love the crisp, tactile response with each flip, instead of the mushy feeling of other brands. The ToggleLinc is designed and manufactured to ISO9002 specifications and goes through over 10 quality control tests. You'll thank yourself for choosing this premium quality product.

Fully X10 Compatible
ToggleLincs can be controlled from any X10 transmitter. Unlike some switches, ToggleLinc responds to all the standard X10 commands.

Status/Night Light Locator
A small, subtle green LED at the top of ToggleLinc makes it easy to find in a dark room. The LED blinks in response to X10 signals making installation and troubleshooting simple.

Easy to Install and Set Up
ToggleLinc wires is like a standard wall switch, with an additional connection to a neutral wire. To set the X10 address, press and hold the set-button for 5 seconds then send it the X10 address from any X10 compatible transmitter.

3- & 4-Way Ready
Simply add a ToggleLinc Multi-way Companion to build a 3-way circuit, add two of them to build a 4-way circuit, add three for 5-way, etc. The multi-way companions simply connect to the yellow wire on ToggleLinc 2-Way.

Low Voltage/Ceiling Fan Control
ToggleLinc 2-Way Dimmer can control low voltage halogen (e.g. track) or other low voltage lights. (Note: works with most magnetic and dimmable electronic transformers.) Also, ToggleLinc 2-Way can control your ceiling fan. (Note: some motors may produce a subtle humming sound.)

Power Failure Feature
If programmed to do so, all ToggleLinc settings can be stored in static memory and are not lost during power failures. Additionally ToggleLinc will return to its last brightness level upon a power restore.

2-Year Warranty
Smarthome stands behind the entire SwitchLinc line of products with a full 2-year warranty. Increase your warranty from 2 years to 7 for a nominal fee. Check the box above.

Safety Tested and Factory Certification

All ToggleLinc products are safety approved. The assembly line for Smarthome Design Products is ISO9002 certified. In order to meet the ISO 9002 standards, the entire factory underwent rigorous inspections of procedures and policies before being thoroughly audited. The certification received was based on its dedication to high quality management systems and strict adherence of quality systems and guidelines.

Need a Trim Plate?
Be sure to order a trim plate for each SwitchLinc dimmer switch.

Specifications

Specifications
Smarthome Design Product No.:	23895i
Voltage & Frequency:	125VAC, 60hz
Dimensions:	1.73"w x 4.14"h x 1.73"d (front bracket), 1.74"w x 2.71"h x 1.40"d (main body)
Maximum Load:	600 watts
Minimum Load:	No minimum load required
Controllable Device Types:	Incandescent and some inductive loads
Warranty:	2 years (7-year warranty available for purchase)

Images/Video


Side view of ToggleLinc	Angled view of ToggleLinc	ToggleLinc Wiring Diagram (Std. 2-Way)	ToggleLinc Wiring Diagram (Std. 3-Way)

ToggleLinc Wiring Diagram (Virtual 3-Way)	Smarthome ToggleLinc Comparison Chart