|
|
|
|
| SWITCHLINC RX PLC DIMMER, IVORY |
|
|
| Item# 2384I2 |
Free shipping on orders over $200 details
|
|
|
|
|
|
Overview
|
- Natural high-quality feel, compared to other brands
- No neutral wire needed - Ideal for older homes
- Adjustable dimming and fade on/off feature
- Responds to X10 commands
Essential Info
This switch is ideal for older homes that do not have the necessary neutral wiring required by most switches today. The SwitchLinc RX is an X10 / Power Line Controlled (PLC) dimmer switch that only requires the basic LINE and LOAD wires found on virtually every 110V switch.
Manuals/Software
What's Included
SwitchLinc RX PLC Dimmer, Ivory
Owner's Manual
2 mounting screws
5 wire nuts
|
More Info
|
All of the great features as the SwitchLinc PLUS including non-neutral wiring, but does not offer scene capabilities.
True Rocker Action & Beautiful, High Quality Construction
Unlike other X10-compatible switches, the SwitchLinc RX offers the natural feel of high-end switches: tap the top to turn lights on, tap the bottom to turn lights off. Other X10 switches only respond to pressing the bottom. You'll also love the crisp, tactile response with each touch, instead of the mushy feeling of other brands. The SwitchLinc RX is designed and manufactured to high-end specifications and goes through over 10 quality control tests. You'll thank yourself for choosing this premium quality product.
Fully X10 Compatible
SwitchLinc RX switches can be controlled from any X10 transmitter. Unlike some switches, SwitchLinc RX switches responds to all the standard X10 commands.
Adjustable Fade Rate
You can adjust the rate at which the light turns on or off, also known as the ramp rate. For example, you may want the light in the stairwell to turn on instantly so you can see where you're walking. Conversely, you may want the light in the master bathroom to ramp up in a soft, gentle fashion so you're not blinded in the middle of the night. The ramp rate is adjustable between 0.1 seconds and 9 minutes (for a simulated sunrise or sunset).
Dimmable
You can adjust the brightness level locally by pressing and holding the top or bottom of SwitchLinc RX. You can also adjust the brightness remotely by sending it standard, X10 dims and brightens or by sending it a Preset Dim command.
Brightness Indicator Bar
An elegant brightness bar of 8 LEDs indicates the current brightness of the lights being controlled. This can be exceptionally helpful when it is difficult to see the light being controlled (e.g. outside or behind closed doors).
Night / Status Light
A small, subtle green LED at the top of SwitchLinc makes it easy to find in a dark room. The LED blinks in response to X10 signals making installation and troubleshooting simple.
Easy to Install and Set Up
SwitchLinc RX wires in like a standard wall switch, and to set X10 addresses, simply press and hold the set-button for 5 seconds and send and then send an X10 address from any X10 compatible transmitter. To set the primary on level, adjust it to the desired brightness level and single tap the set button. To set the ramp rate, brighten the light to a level corresponding to the desired ramp rate and double tap the set button. All features/options can be set up remotely using an X10 transmitter (except the base address).
3- & 4-Way Ready
Simply add a SwitchLinc Multi-way Companion to build a 3-way circuit, add two of them to build a 4-way circuit, add three for 5-way, etc. The multi-way companions simply connect to the yellow wire on SwitchLinc RX.
Double Tap
Double tap of top brings light to full on fast while a double tap of the bottom turns lights off fast.
Power Failure Features
All SwitchLinc settings are stored in static memory and are not lost during power failures. Additionally SwitchLinc will return to its last brightness level upon a power restore.
2-Year Warranty
Smarthome stands behind the entire SwitchLinc line of products with a full 2-year warranty. Increase your warranty from 2 years to 7 for a nominal fee. Check the box above.
Safety Tested and Factory Certification
All SwitchLinc products are safety approved. The assembly line for Smarthome Design Products is ISO9002 certified. In order to meet the ISO 9002 standards, the entire factory underwent rigorous inspections of procedures and policies before being thoroughly audited. The certification received was based on its dedication to high quality management systems and strict adherence of quality systems and guidelines.
Need to Control Larger Than a 600-Watt Load?
Try SwitchLinc 1,000-watt dimmer
Large Installation?
We recommend substituting the SwitchLinc Plus for the 2-Way SwitchLinc in any large scale installation where the transmit feature of the 2-Way SwitchLinc is not required.
Need a Wall Plate?
Be sure to order a wall plate for each SwitchLinc dimmer switch.
|
Specifications
|
Specifications | | Smarthome Design Product No.: | 2384i2 | | Color: | Ivory | | Voltage & Frequency: | 125VAC, 60Hz | | Dimensions: | 1.73"w x 4.14"h x 1.73"d (front bracket)
1.74"w x 2.71"h x 1.40"d (main body) | | Maximum Load: | 600 watts (see manual for multi-gang ratings) | | Minimum Load: | 40 watts | | Circuit Types: | Single pole / 3, 4 and 5-way ready | | Operating Temperature: | 40°F to 104°F | | Neutral Connection: | Not required | | Controllable Device Types: | Incandescent loads | | Warranty: | 2 years (7-year warranty available for purchase) |
|
Images/Video
|
|
|
Reviews
|
|
|
Accessories
|
|
|
Related Items
|
|
|
|
|