• Add UPB devices to your X10 system
• Add X10 devices to your UPB system
• Supports UPB links and X10 extended & scene commands
• Operates alone or attached to legacy X10 controller

The Foard System Design FS-1000110-03 X10 / UPB Compact Bridge provides a flexible and inexpensive means to support a two-protocol Home Automation installation. It supports X10 (with extended command capability, including variations from different manufacturers) and UPB devices. The compact bridge controller can be used stand-alone to integrate devices in a mixed X10 and UPB installation, or with a legacy X10 controller. Input and output commands to/from the X10, UPB, and FGI devices can be mapped across to the other protocols; for example, an X10 switch or a lowvoltage hardwired switch could be mapped to send a UPB link command to control UPB devices, and a UPB command could be used to control an X10 device, X10 scene, or hardwired relay device. If used with a legacy X10 controller, input and output commands to/from the UPB and FGI devices can be mapped to X10 commands to the legacy X10 controller, via the legacy controller TW523 or PL513 X10 interface. The Compact Controller also includes a flexible macro programming capability, and interval timer support.

Provided software is used on a Windows XP or Windows 2000 computer to configure the compact bridge operation The computer loads the bridge via the UPB serial port, and does not remain connected during operation.

• Owner's Manual

FSD X10 / UPB / Compact Bridge

FSD Automator Software Suite

Power Transformer, 9VAC

X10 Interface Cable

Foard System Design X10 Compact Controller	Foard System Design UPB Compact Controller	Foard System Design X10/UPB/FGI Bridge Controller Plus	Foard System Design X10-UPB-FGI Bridge Controller