• Designed to connect an Ademco Vista 10se, 20se, 15p, 20p, or 50p security system to a HomeSeer PC or Home Automation Controller
• Operate alarm system remotely with virtual keypad

This PC interface board was designed to allow control of your Ademco/Honeywell Vista alarm systems from a computer running Windows, Linux, or OSX. The AD2USB presents itself to your computer as a virtual serial port and only consumes 20-30mA. Just attach the AD2USB to the four wires from the alarm panel or extend the existing alarm panel keypad wires to the device.

Once connected, you will be able to arm/disarm the system, detect and monitor opening and closing of zones, unlock or discover installer codes, program your panel, download programming, set triggers for virtual zones and even monitor your alarm sensors directly from your home automation system. You can even backup your alarm configurations to a file. A full ALPHA keypad emulator is included, so you won’t need a physical keypad to program the alarm.

The AD2USB comes with firmware and a bootloader so you can upload new firmware as improvements are added.

NOTE: The AD2USB requires a USB A to Mini USB B cable, (not included).

Smarthome does not accept defective returns for this product. You will need to contact the Manufacturer (or Supplier) directly for all warranty issues.

• Smarthome does not offer technical support on this product, please contact the manufacturer directly for all product support.
• Smarthome does not accept any returns for this product. If defective, you will need to contact the manufacturer directly for all warranty issues.

• Owner's Manual

Skylink Wireless INSTEON Motion / Occupancy Sensor	Aeon Labs DSB09104-ZWUS Z-Wave Home Energy Monitor	Aeon Labs DSC06106-ZWUS Z-Wave Smart Energy Switch	Venstar Thermostat - INSTEON Remote Control Thermostat 7-Day Programmable