• Plug-in module connects to PC via USB cable
• Gives UPB computer control for UPB lighting and configuration only

The Computer Interface Module, model UMC, is used to exchange digital commands between a PC (personal computer) or home automation controller and UPB (Universal Powerline Bus) devices in the home. The module communicates these commands over the AC power wiring.

Model UMC-DB9 provides a Serial RS-232 interface with a DB9 connector and cable, for both configuration and control of UPB lighting.
Model UMC-USB provides a USB interface with a USB cable, for configuration of UPB lighting only. The UMC-USB is not recommended for home automation controller interface applications (e.g. alarm system, PC or whole home controller).
UPB devices can be freely located anywhere in the home. No additional wiring is required and no radio frequency signals are used.

Note: When using a UPB enabled alarm system or home automation controller for systems other than lighting, it is recommended to use the RS-232 interface, as RS-232 is a more robust communication protocol.

• Smarthome does not offer technical support on this product, please contact the manufacturer directly for all product support.
• Only defective exchanges for identical item within 30 days of purchase. No other returns allowed on this item. For defective returns after 30 days, please contact the manufacturer.

• Owner's Manual

Aeon Labs Z-Stick Series 2

Single UPB Dimmer Switch, 900w, White	Wire-In UPB Phase Coupler	In-Wall UPB 8-Button Dimmer, Thinbar, White	ApplianceLinc - INSTEON Plug-in Appliance On/Off Module, 3-Pin