Overview
|
- Control any light or appliance via X10 commands
- Extended addressing capability up to 4096 addresses
- Use for any non-dimming application
Essential Info
Now you can automate a built-in light or appliance fixture without having to change the switch. The HomePro Fixture Relay Module wires in discreetly and permanently to any light or appliance. Just mount this compact in-line fixture switch to the inside of the lighting or appliance fixture with the included self-adhesive tape and attach it to your wiring, and you'll be able to control the unit via X10 or extended address commands. A transmitter is required to communicate with the module and is sold separately.
Manuals/Software
What's Included
HomePro Fixture Relay Module 20A W. AGC
|
More Info
|
Ideal for non-dimming applications, the Fixture Relay Module can control such loads as ceiling fans or fluorescent lighting. With two-way powerline communication, the Fixture Relay Module will respond to relay status requests for standard or extended addresses. The LED on the face is a guide in programming and also indicates status and power.
You'll be able to control high current loads up to 305 VAC with the HomePro Fixture Relay Module, which features advanced A10 circuitry and is X10 signal compatible. The Fixture Relay Module features both standard and extended addressing. This X10-compatible module accepts all standard 256 X10 addresses, but it can also be programmed to any of the extended X10 addresses, which number up to 4096 addresses. This in-line module responds to ON, OFF, ALL LIGHTS ON, ALL LIGHTS OFF and ALL UNITS OFF commands.
The HomePro Fixture Relay Module is an A10 enhanced powerline carrier receiver controlling a single internal isolated contact form-A relay, which holds the last commanded state upon power loss. A10 circuitry also remembers the last relay state to provide the correct status report upon power loss. By enabling the Fixture Relay Module's "polite mode," the module will wait until there's no noise on the line to transmit a signal.
|
Specifications
|
Specifications | | Manufacturer: | Advanced Control Technologies | | Manufacturer Product No.: | RF124 | | Dimensions: | 2.88" L x 1.81" W x 1.6" D (73.1mm L x 46.1mm W x 39.3mm D) | | Weight: | 4.8 oz. (13.6g) | | Connections: | Flying lead connections | | Supply Voltage: | 120 VAC +/-10% | | Frequency: | 50 or 60 Hz | | Power Consumption: | Less than 4.5W | | Signal Input: | X10 Powerline Carrier, sensitive to 25 millivolts | | Signal Output (Status): | X10 Powerline Carrier, 6V peak to peak @ 5 ohms | | Maximum Switching Power: | 5540VA | | Maximum Switching Voltage: | 305VAC | | Maximum Switch Current: | 20 Amps | | Internal Relay Life Cycles at Listed Load: | 100,000 operations; 20A, 120 VAC general use; 10 FLA, 60LRA, 250VAC; 1 H.P., 120/240VAC; TV8 (Tungsten), 120 VAC, 960W incandescent; Pilot Duty A300 | | Mounting: | Double-sided foam tape for attachment in electrical junction box | | Connections: | Flying leads; LINE or L1 -18 AWG, LOAD (2) -12 AWG, NEUTRAL, or L2 -18 AWG | | Operating Temperature: | 32° F to 120° F (0° C to 48° C) | | Operating Humidity: | 5% to 95% non-condensing | | Approvals: | ANSI/UL STD 244A and CAN/CSA C22.2 No. 177 compliant |
|
Reviews
|
|
|
Accessories
|
|
|
Related Items
|
Customers Also Bought
|
|
View Cart 
