220V / 240V 30 AMP INSTEON Load Controller Normally Open Relay (Dual-Band)
Share Share Share Share Share
Rewards: 238 Points

220V / 240V 30 AMP INSTEON 2477SA1 Load Controller Normally Open Relay (Dual-Band)

Use a Heavy-Duty INSTEON Switch to Control High Current 220V / 240V Devices
  • Remote On/Off control of 220V / 240V, 60Hz devices via INSTEON
  • Economically priced solution for controlling heavy-duty appliances up to 30 AMPs
  • Dual-band device acts as Access Point for INSTEON RF only products
  • Easily installed between breaker panel and appliance - no neutral required
  • Acts as an active phase repeater for INSTEON signals

Item #: 2477sa1

In stock - Ships Today

$119.99
Frequently Bought Together:
  • Details
  • Specs
  • Reviews
  • Manuals
  • What's Included
  • The INSTEON 220V / 240V 30 AMP Load Controller Normally Open Relay (Dual-Band) lets you efficiently control the use of heavy duty appliances and take a step towards saving energy and cutting down on utility costs.

    With the ability to control 240V appliances, you can keep an eye on some of the larger energy consumers in your home. If you're headed away on a weeks-long vacation, why bother running the water heater? Save money and energy by programming an INSTEON controller to automatically disable the water heater whenever a vacation scene is run.

    Tired of the ancient analogue timer that runs your pool system? Replace it with a 240V controller and have the INSTEON Hub or other controller keep things on a schedule. Do some research with your utility company and you can even program your pool system to clean when the electric rates are at their lowest.

    At the end of a stressful day at work, how nice would it be if your spa or sauna could be prepped and ready for you the moment you walk through the door? High current applications like pool pumps and electric heaters can be controlled, letting you treat your luxury home amenities just like your INSTEON-controlled lights.

    Controlling loads up to 30 Amps, it allows you to use other INSTEON devices to remotely control appliances that run on higher voltage and in a normally open state. A local 'Set' button lets you toggle the attached load on and off. The relay comes with pre-configured wires and mounting hardware. There is no need to open the box for installation, simply identify the labeled wires and connect one set to your breaker panel and the other set to the high current appliance.

    This switch also features INSTEON Dual-Band technology, which sends and receives INSTEON powerline and wireless radio frequency (RF) signals. This allows the module to function as a phase bridge for superior signal reliability and as an access point for INSTEON RF and battery powered devices.

    The INSTEON 220V / 240V 30 AMP Load Controller is also available as a Normally Closed Relay, sold separately.

    Required Accessories - Depending on your particular application, you will likely need:
    4 to 6 large red wire nuts
    3/4" conduit between the product and a near-by junction box
    Suitable junction box for connection to existing wiring
    Mounting screws

    INSTEON
    INSTEON is a powerful home-control networking technology. INSTEON messages are transmitted throughout your home both wirelessly and through the home's existing wiring. All INSTEON messages are confirmed and repeated by INSTEON devices in the network, contributing to the outstanding reliability and performance of INSTEON products.

    Safety Tested and Approved
    All of the components have been safety tested and approved.

  • General
    Brand: INSTEON
    Manufacturer Product No.: 2477SA1, INSTEON 220V / 240V 30 AMP Load Controller Normally Open Relay (Dual-Band)
    UPC: 813922010374
    Patent No: U.S. Patent No. 7,345,998, International patents pending
    Color: Gray
    Dimensions: 8.6" H x 4.5" W x 2.5" D (21.8 cm H x 11.4 cm W x 6.4 cm D)
    Weight: 1.40 lbs.
    Operation
    Local Control: Yes
    Load Sense: No
    Power Restore: Yes
    Application LED(s): Load Active (LED follows relay)
    Field Upgradable Support: No
    Operating Environment: Indoor
    Operating Temperature Range: 32° F to 104° F (0° C to 40° C)
    Operating Humidity Range: 0-85% Relative Humidity
    INSTEON Features
    INSTEON Addresses: 2 hard-coded (1 for Access Point, 1 for Relay)
    Maximum # of Controller Groups: 1
    Maximum # of Responder Groups: 1
    INSTEON Links (max): 417 (total of controller and responder)
    INSTEON All-Link Support: Yes
    INSTEON Multi-link Support: No
    INSTEON Unlink Support: Yes
    INSTEON Multi-unlink Support: No
    INSTEON PLC (Powerline Carrier): Yes
    INSTEON RF: Yes
    INSTEON Powerline Minimum Transmit Strength: 3.2 Vpp into 5 Ohms
    INSTEON PowerLinc Maximum Sensitivity: 10 mVPP nominal
    INSTEON RF Range: 100' minimum, open-air
    INSTEON Messages Repeated: Yes
    INSTEON Controller: Yes
    INSTEON Responder: Yes
    Electrical
    Input Power Voltage: 220/240 Volts (+/- 10%) - Two 120-Volt split-single phase electrical lines
    Input Power Voltage Type: AC
    Input Power Voltage Phase Type: Split, single phase - connections only to leg A and leg B (no neutral connection)
    Input Power A/C Frequency: 60 Hz
    Controllable Device Types: All INSTEON Responders
    Certification: Safety tested for use in USA and Canada (ETL #3193579)
    FCC ID: SBP2477SA
    Industry Canada: 5202A-2477SA
  • Reviews 1 - 10 of 41

    Page:
    1. 1
    2. 2
    3. 3
    4. 4
    5. 5
    Review of 2477sa1 Review by TRAVIS
    Review of 2477sa1
    Rating

    Great product! However, I started the exchange process on June 25th and it took almost a month to get the replacement! It cost more money in electrical and was a hassle to manually turn on and off the pool which resulted sometimes in it getting cloudy.

    Posted on 8/15/2014

    Review of 2477sa1 Review by Jim
    Review of 2477sa1
    Rating

    Bought and installed two three years ago, one for the spa blower and one for the poll pump. Worked fine. After three years, the pool pump switch button broke and I had to order a new one. By mistake I ordered, must of hit the buitton twice, well the fiorst one would not work after a day so I put in the second, it failed in three days. Called SH and got an rma, sent them back and got a third one. It started to fail the very first day. I checked the spec and saw the upper range of 104 F, well it was 90 today so maybe it over heated. However, the spa switch, same model but over three years old, still worked. The pool pump switch continued to fail tonight when the temp was in the low 70's. Other reviews suggest the device cannot handle the heat. In any event, three stikes and you are out.

    Posted on 6/20/2014

    Review of 2477sa1 Review by Jim Schwanda
    Review of 2477sa1
    Rating

    Bought and installed two three years ago, one for the spa blower and one for the poll pump. Worked fine. After three years, the pool pump switch button broke and I had to order a new one. By mistake I ordered, must of hit the buitton twice, well the fiorst one would not work after a day so I put in the second, it failed in three days. Called SH and got an rma, sent them back and got a third one. It started to fail the very first day. I checked the spec and saw the upper range of 104 F, well it was 90 today so maybe it over heated. However, the spa switch, same model but over three years old, still worked. The pool pump switch continued to fail tonight when the temp was in the low 70's. Other reviews suggest the device cannot handle the heat. In any event, three stikes and you are out.

    Posted on 6/20/2014

    Review of 2477sa1 Review by Frank
    Review of 2477sa1
    Rating

    Fine when it works, but not durable.
    Failed with less than 1 year of 1x/day use.

    Purchased Oct '12. Installed in pool house for remote control of 220V pool pump.
    Used for ~1 month fall '12.
    Used 1x/day summer-fall '13.
    In '14 it worked fine for two days last weekend.
    Now it has been doing a rapid click of death.

    Factory reset -- hold setup button while restoring power to the circuit till after the beeps -- does not help learned that after a 20min hold that turned out be 65 min hold !! for tech support.

    RMA Cross Shipped with Credit Card guarantee is only Fedex Ground, unless I pay an extra $36 ... so 5-6 business days from CA. Would not split the cost for 3day. Not stellar svc to be without a pool pump controller in the summer. Guess I'll be hot wiring it and running up/down two floors to be the manual on/off controller 'till the new one comes.

    Posted on 6/6/2014

    Review of 2477sa1 Review by Frank D
    Review of 2477sa1
    Rating

    Fine when it works, but not durable.
    Failed with less than 1 year of 1x/day use.

    Purchased Oct '12. Installed in pool house for remote control of 220V pool pump.
    Used for ~1 month fall '12.
    Used 1x/day summer-fall '13.
    In '14 it worked fine for two days last weekend.
    Now it has been doing a rapid click of death.

    Factory reset -- hold setup button while restoring power to the circuit till after the beeps -- does not help learned that after a 20min hold that turned out be 65 min hold !! for tech support.

    RMA Cross Shipped with Credit Card guarantee is only Fedex Ground, unless I pay an extra $36 ... so 5-6 business days from CA. Would not split the cost for 3day. Not stellar svc to be without a pool pump controller in the summer. Guess I'll be hot wiring it and running up/down two floors to be the manual on/off controller 'till the new one comes.

    Posted on 6/6/2014

    Review of 2477sa1 Review by MAURICIO
    Review of 2477sa1
    Rating

    Works flawlessly. I bought one to control my pool pump and another one to control a heat pump.

    Posted on 1/13/2014

    Review of 2477sa1 Review by DrLag
    Review of 2477sa1
    Rating

    Controller works great when it works, but has issues with summer heat and quality. Inside, large power resistors are used to lower the power for the electronics. They burn up in sustained ambient temperatures of 100 degrees F Arizona. Also, the internal solenoids are of good quality, but the connectors to the solenoids are definitely not rated for sustained 30 amp. A 220v 17amp load causes significant heat from these connectors that melts the wire and insulator.

    Posted on 12/1/2013

    Review of 2477sa1 Review by RUSSELL
    Review of 2477sa1
    Rating

    Great. Easy install and it looks like it will be perfect for my application (operating a compressor)

    Posted on 10/13/2013

    Review of 2477sa1 Review by WASEEM
    Review of 2477sa1
    Rating

    unable to connect with a controller.

    Posted on 7/31/2013

    Review of 2477sa1 Review by ROY
    Review of 2477sa1
    Rating

    much to many problems with product. Very poor quality control. When and if unit works I am very please with controller but 5 out of 20 bad is not good at all.

    Posted on 7/30/2013

    Leave a Review

    You're reviewing: 220V / 240V 30 AMP INSTEON 2477SA1 Load Controller Normally Open Relay (Dual-Band)

    • 1 star
      2 stars
      3 stars
      4 stars
      5 stars

    * Required Fields

    • INSTEON 220V / 240V 30 AMP Load Controller Normally Open Relay (Dual-Band)
    • 1 Meter Long Long Wire Pigtails (makes for easy installation)
    • Quick-start Guide
place your order by 3pm PT for same day shipping

Please wait...

smarthome

Item has been added to your cart
smarthome

Item has been removed from your cart